Fully plastic analyses for notched bars and plates using finite element limit analysis

In the present work, fully plastic analyses for notched bars and (plane strain) plates in tension are performed, via finite element (FE) limit analysis based on non-hardening plasticity, from which plastic limit loads and stress fields are determined. Relevant geometric parameters are systematically varied to cover all possible ranges of the notch depth and radius. For the limit loads, it is found that the FE solutions for the notched plate agree well with the existing solution. For the notched bar, however, the FE solutions are found to be significantly different from known solutions, and accordingly the new approximation is given. Regarding fully plastic stress fields, it is found that, for the notched plate, the maximum hydrostatic (mean normal) stress overall occurs in the center of the specimen, which strongly depends on the relative notch depth and the notch radius-to-depth ratio. On the other hand, for the notched bar, the maximum hydrostatic stress can occur in between the center of the specimen and the notch tip. The maximum hydrostatic stress for a given notch depth can occur not for the cracked case, but for the notched case with a certain radius. This is true for both bars and plates. For a given notch radius, on the other hand, the maximum hydrostatic stress increases monotonically with the decreasing notch radius.     

Preparation of a sensor substrate using functionalized mesoporous silica on a gold film for surface plasmon resonance (SPR) spectroscopy

The use of surface plasmon resonance (SPR) spectroscopy has been applied to a wide variety of fields such as biosensors and surface analysis instruments. In general, a SPR substrate is prepared using self-assembled monolayer (SAM) method of organic molecules as receptor for the target on a layer of gold or silver. However, mesoporous inorganic materials such as SBA-15 have benefits as sensor substrate for SPR. Mesoporous silica has a large surface area which receptor molecule can be attached and has a rigid body which has an excellent stability in the extreme condition compared to organic sensing layer. We prepared an organic modified mesoporous silica and successfully immobilized it on a gold surface, in an attempt to use as a substrate for SPR spectroscopy. For the comparison of sensitivity of prepared substrate, Pt²⁺ detection was selected as a model system. Substrate prepared in this study exhibited the capability of selective sensing for Pt²⁺ ions.     

A novel way to improve the dispersion-limited transmission distance of electroabsorption modulated lasers

We propose and demonstrate a way to improve the dispersion-limited reach of electroabsorption modulated lasers (EMLs). We generate continuous-phase frequency-shift keying/amplitude-shift keying (ASK) signals with the EML by applying a small current modulation to the laser diode (LD) on top of electroabsorption-modulated ASK signals. The amount of frequency deviation induced by the current modulation is adjusted to have the EML output signals experience /spl pi/ phase shift at every space. The experimental demonstration shows that with the proposed scheme we can increase the dispersion-limited transmission distance of the EML-based transmitter by 25%-75%, and it can be further improved by employing an LD with flat frequency-modulation response.     

Inside Front Cover: Photonic Crystal Structures as a Basis for a Three‐Dimensionally Interpenetrating Electrochemical‐Cell System (Adv. Mater. 13/2006)

The inside cover shows an SEM image of a 3D‐interpenetrating electrochemical cell with submicrometer features, as reported by Stein and coworkers on p. 1750. The pores of an inverse‐opal carbon electrode are coated with a conformal layer of a polymer separator and infiltrated with vanadia to form the opposite electrode after lithiation. The idealized scheme illustrates lithium‐ion transport between the electrodes through the polymer membrane.     

Limit of ferrite grain refinement by severe plastic deformation of austenite

High-angle grain-boundary spacing in deformed austenite is analyzed using Ni-30Fe alloy to explain the change of ferrite grain size by severe plastic deformation (SPD) of austenite in low carbon steel. It is suggested that constant high-angle grain-boundary spacing in deformed austenite resulting from dynamic recrystallization (DRX) or geometric DRX is responsible for the limit of ferrite grain refinement over a certain level of plastic deformation of austenite.     

Recrystallization and grain growth of cold-rolled gold sheet

Recrystallization and grain growth of a cold-rolled gold sheet with 98 pct reduction in area (RA) were investigated with electron backscatter diffraction (EBSD) and X-ray diffraction (XRD). Gold with some dopants (Be, Ca, and La) was used in this research and its recrystallization temperature was 320 °C. Isothermal annealing experiments at 400 °C, 500 °C, and 600 °C were carried out for the cold-rolled gold sheet, and recrystallization texture was examined. In the cold-rolled gold sheet, α- and β-fibers were measured mainly and some shear texture components were found on the surface. Shear texture components remained on the surface for 2 hours at 400 °C and were consumed by other recrystallized grains after 24 hours at 400 °C. Microstructure and texture evolution during in-situ annealing at 400 °C were investigated from the cold-rolled state to the fully recrystallized state using EBSD. Most of the newly, recrystallized grains came from the deformed β-fiber regions and consisted of β-fiber, cube, and other random orientations.     

A new LDPC decoding algorithm aided by segmented cyclic redundancy checks for magnetic recording channels

We introduce a new low-density parity-check (LDPC) decoding algorithm that exploits the cyclic redundancy check (CRC) information of data segments. By using the error detection property of the CRC, we can successively decode data segments of a codeword corrupted by random errors and erasures. The key idea is that the messages from the variable nodes with correct checksum are fixed to deterministic log likelihood ratio values during LDPC iterative decoding. This approach improves the decoding speed and codeword error rate without significant modification of the LDPC decoding structure. Moreover, the CRC is also used for an early stopping criterion of LDPC decoding. Simulation results verify our claims.     

Time-accurate Navier-Stokes simulation of vortex convection using an unstructured dynamic mesh procedure

A two-dimensional Navier-Stokes flow solver is developed for the simulation of unsteady flows on unstructured adaptive meshes. The solver is based on a second-order accurate implicit time integration using a point Gauss-Seidel relaxation scheme and a dual time-step subiteration. A vertex-centered, finite-volume discretization is used in conjunction with Roe’s flux-difference splitting. The Spalart-Allmaras one equation model is employed for the simulation of turbulence. An unsteady solution-adaptive dynamic mesh scheme is used by adding and deleting mesh points to take account of spatial and temporal variations of the flowfield. Unsteady viscous flow for a traveling vortex in a free stream is simulated to validate the accuracy of the dynamic mesh adaptation procedure. Flow around a circular cylinder and two blade-vortex interaction problems are investigated for demonstration of the present method. Computed results show good agreement with existing experimental and computational results. It was found that unsteady time-accurate viscous flows can be accurately simulated using the present unstructured dynamic mesh adaptation procedure.     

Low-threshold vertical-cavity surface-emitting lasers based onoxide-confinement and high contrast distributed Bragg reflectors

The interest in low-threshold vertical-cavity surface-emitting lasers (VCSEL's) is increased by the demonstration of the small size, low loss optical mode due to oxide-confinement in the Fabry-Perot microcavity laser. Intense recent work in this area has resulted in numerous record breaking demonstrations of low-threshold current, high wall-plug efficiency, and high speed. In this paper, we discuss the impact of the dielectric cavity design to enhance control of the optical mode. We argue that high contrast dielectric mirrors can become an important design approach, especially for small apertures limited by diffraction loss. Experimental results are compared for different types of mirror and aperture designs     

Factors Affecting Flow-Mediated Vasodilatation in Hemodialysis Patients

Clinical manifestation of overt vascular disease may be preceded for years by endothelial dysfunction. Objective: This study was undertaken to evaluate endothelial function in ESRD patients and correlation between endothelial function and clinical and biochemical parameters. Methods: 32 stable ESRD patients (male : female = 16 : 16, average age: 55.2 ± 13.0) on hemodialysis were included. A 10‐MHz ultrasound transducer was used to image the brachial artery. Brachial artery diameter was measured, and reactive hyperemia was induced by inflation to 250 mmHg for 5 min and then deflation of a pneumatic cuff. After release of the cuff, brachial artery diameter was measured. Results: In the entire study population and non‐diabetic group, the %FMD (% flow‐mediated dilatation, % change of brachial artery diameter between before and after cuff inflation) did not show any significant correlation with duration of dialysis, age, hypertension, albumin, CRP, total cholesterol, LDL and HDL cholesterol, and triglyceride. However, the %FMD of diabetic patients was lower than that of non‐diabetics. Among the patients with diabetes, the group of patients with FMD of <5.2% showed significant lower serum albumin and significantly higher ln(CRP) levels compared to the group of patients with FMD ≥5.2%. The %FMD showed significant positive correlation with serum albumin level and significant negative correlation with ln(CRP) in diabetic patients. Conclusion: These findings suggest that endothelial dysfunction, estimated by FMD, was significantly more prominent in diabetic ESRD, especially with low serum albumin and high CRP levels.