Combinatorial pulsed laser deposition and thermoelectricity of (La1−xCax)VO3 composition-spread films

La_1−xCa_xVO₃ composition-spread film library was fabricated by combinatorial pulsed laser deposition and their thermoelectric properties were evaluated paralelly by the multi-channel probes of Seebeck coefficient and electric conductivity. Concurrent X-ray analysis verified the formation of solid soluted films in the full composition range (0x1) as judged from the linear variation of the lattice constants. The Seebeck coefficients of La_1−xCa_xVO₃ changed from a large negative value to almost zero with the increase of x, due presumably to the variation of valence in vanadium ions.The power factor in this library was as high as 0.6 μW/cm K², which was obtained at x=0, i.e. pure LaVO₃ grown at 800 °C.     

38. R&D on hydrogen production by high-temperature electrolysis of steam

One of the objectives of the high-temperature engineering test reactor (HTTR) is to demonstrate the effectiveness of high-temperature nuclear heat utilization, which aims to extend the application of nuclear heat to non-electric fields, especially to hydrogen production. As part of the development of the hydrogen production processes, laboratory-scale experiments of a high-temperature electrolysis of steam (HTES) had been carried out with a practical electrolysis tube with 12 solid-oxide cells connected in series. Using this electrolysis tube, hydrogen was produced at the maximum density of 44 N cm³/cm² h at a electrolysis temperature of 950 °C. Thereafter, to improve hydrogen production performance, a self-supporting planar electrolysis cell with a practical size (80 mm × 80 mm of electrolysis area) was fabricated. In the preliminary electrolysis experiment carried out at 850 °C, the planar cell produced hydrogen at the maximum density of 38 N cm³/cm² h, and the energy efficiency was almost as high as that obtained with the electrolysis tube at 950 °C. However, both electrolysis tubes and planar cells did not keep their integrity in one thermal cycle. Durability of the solid-oxide cell against the thermal cycle is one of the key issues of HTES.     

Thermomechanical fatigue behavior of the third-generation,single-crystal superalloy TMS-75: Deformation structure

The deformation structure after the out-of-phase thermomechanical fatigue (OP TMF) of the single-crystal (SC), Ni-based superalloy TMS-75 has been studied. Mechanical experiments were performed at temperatures between 400 °C and 900 °C under different total strain ranges with varying hold times in the compression stage. The lives of TMF for samples with hold times of 10 and 60 minutes dropped drastically by one order of magnitude as compared with those without it. Different structures developed during TMF were correlated to the difference in mechanical behavior for the two cases. The dislocations in the γ phase and the stacking faults (SFs) in the γ′ phase were quantitatively analyzed by transmission electron microscopy (TEM). This work verified that shearing of the γ′ precipitates occurred with a single-dislocation mechanism rather than a dislocation-reaction mechanism. The implications of this work on the design of superalloys are presented.     

TRADE‐OFF BETWEEN APPROXIMATION ACCURACY AND COMPLEXITY FOR TS FUZZY MODELS

This paper proposes a transformation method that serves the trade‐off between the modelling complexity and accuracy of multi‐variable Takagi‐Sugeno fuzzy inference operator‐based modelling (TS fuzzy modelling). The relation between the number of fuzzy rules and the modelling accuracy is defined in the paper. The proposed transformation method is capable of finding the minimal number of fuzzy rules for a given accuracy of a given TS fuzzy model. A case study, focusing on a benchmark problem of fault diagnosis, developed in the framework of EC‐founded Research Training Network DAMADICS, of an actuator in a sugar factory, is presented to provide feasibility of the proposed method.     

VLS growth of alternating InAsP/InP heterostructure nanowires for multiple-quantum-dot structures

We investigated the Au-assisted growth of alternating InAsP/InP heterostructures in wurtzite InP nanowires on InP(111)B substrates for constructing multiple-quantum-dot structures. Vertical InP nanowires without stacking faults were obtained at a high PH(3)/TMIn mole flow ratio of 300-1000. We found that the growth rate changed largely when approximately 40 min passed. Ten InAsP layers were inserted in the InP nanowire, and it was found that both the InP growth rate and the background As level increased after the As supply. We also grew the same structure using TBAs/TBP and could reduce the As level in the InP segments. A simulation using a finite-difference time-domain method suggests that the nanowire growth was dominated by the diffusion of the reaction species with long residence time on the surface. For TBAs/TBP, when the source gases were changed, the formed surface species showed a short diffusion length so as to reduce the As background after the InAsP growth.     

Out‐of‐Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111)

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS₂ and MoSe₂ monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out‐of‐plane strain in both MoS₂ and MoSe₂ layers, whereas no strain generation is observed on polycrystalline Au or SiO₂/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S? Mo? S (Se? Mo? Se) structure and Au atoms via unique moiré superstructure formation for MoS₂ and MoSe₂ layers on Au(111). This observation indicates that the specific adsorption sites give rise to out‐of‐plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS₂ or MoSe₂ layer.     

The fluorescence behavior from SAM of dendron with rhodamine B as a center

We studied energy transfer between rhodamine B molecules centered in each corn-shaped dendrons that forms self-assembled monolayer (SAM) film on an Au substrate. A SAM film using dendron moiety as a spacer can change the distance between rhodamines depending on the size, so that the energy transfer from an initially photo-excited rhodamine to its surrounding molecules can be controlled. The absorption spectrum of a SAM film for each generation of dendron was measured to ascertain a linear correlation between the generation and the distance. Picosecond time-resolved fluorescence spectra showed clear differences in the fluorescence decay dynamics between third-generation (G3) and fourth-generation (G4) dendron SAM films. In addition, we found that “dry” or “wet” dendron SAM considerably influenced fluorescence behavior. As a result, the use of “wet” G4 SAM is suitable in preserving photo-excitation energy. This is because it gave almost equal dynamics to G4 dendron in the dilute solution and prevented deactivation by energy dissipation.     

Development and Use of a Kinetical and Real-Time Monitoring System to Analyze the Replication of Hepatitis C Virus

In microbiological research, it is important to understand the time course of each step in a pathogen’s lifecycle and changes in the host cell environment induced by infection. This study is the first to develop a real-time monitoring system that kinetically detects luminescence reporter activity over time without sampling cells or culture supernatants for analyzing the virus replication. Subgenomic replicon experiments with hepatitis C virus (HCV) showed that transient translation and genome replication can be detected separately, with the first peak of translation observed at 3–4 h and replication beginning around 20 h after viral RNA introduction into cells. From the bioluminescence data set measured every 30 min (48 measurements per day), the initial rates of translation and replication were calculated, and their capacity levels were expressed as the sums of the measured signals in each process, which correspond to the areas on the kinetics graphs. The comparison of various HuH-7-derived cell lines showed that the bioluminescence profile differs among cell lines, suggesting that both translation and replication capacities potentially influence differences in HCV susceptibility. The effects of RNA mutations within the 5′ UTR of the replicon on viral translation and replication were further analyzed in the system developed, confirming that mutations to the miR-122 binding sites primarily reduce replication activity rather than translation. The newly developed real-time monitoring system should be applied to the studies of various viruses and contribute to the analysis of transitions and progression of each process of their life cycle.     

Dimethyl Fumarate Induces Apoptosis via Inhibition of NF-κB and Enhances the Effect of Paclitaxel and Adriamycin in Human TNBC Cells

Triple-negative breast cancer (TNBC) has the poorest prognosis of all breast cancer subtypes. Recently, the activation of NF-κB, which is involved in the growth and survival of malignant tumors, has been demonstrated in TNBC, suggesting that NF-κB may serve as a new therapeutic target. In the present study, we examined whether dimethyl fumarate (DMF), an NF-κB inhibitor, induces apoptosis in TNBC cells and enhances the apoptosis-inducing effect of paclitaxel and adriamycin. Cell survival was analyzed by the trypan blue assay and apoptosis assay. Protein detection was examined by immunoblotting. The activation of NF-κB p65 was correlated with poor prognosis in patients with TNBC. DMF induced apoptosis in MDA-MB-231 and BT-549 cells at concentrations that were non-cytotoxic to the normal mammary cell line MCF-10A. Furthermore, DMF inhibited NF-κB nuclear translocation and Survivin, XIAP, Bcl-xL, and Bcl-2 expression in MDA-MB-231 and BT-549 cells. Moreover, DMF enhanced the apoptosis-inducing effect of paclitaxel and adriamycin in MDA-MB-231 cells. These findings suggest that DMF may be an effective therapeutic agent for the treatment of TNBC, in which NF-κB is constitutively active. DMF may also be useful as an adjuvant therapy to conventional anticancer drugs.     

DC‐linked hybrid generation system with an energy storage device including photovoltaic generation and gas engine cogeneration for residential houses

For the past few years, hybrid generation systems including solar panel and gas cogeneration have been used for residential houses. Solar panels can generate electronic power at daytime but not at night. But the power consumption of residential houses usually peaks in the evening. The gas engine cogeneration system can generate electronic power without such a restriction, and it also can generate heat power to warm up a house or to produce hot water. In this paper we propose a solar panel and gas engine cogeneration hybrid system with an energy storage device, combined by a DC bus. If a blackout occurs, the system still can supply electronic power for special house loads. We propose a control scheme for the system related to the charging level of the energy storage device and the voltage of the utility grid, which can be applied to both grid‐connected and standalone operation. Finally, we report experiments designed to demonstrate system operation and calculations for loss estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(4): 29–46, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ).DOI 10.1002/eej.22321