Natural fibers and zinc hydroxystannate 3D microspheres based composite paper sheets for modern bendable energy storage application

For modern high-tech flexible energy storage devices, it becomes important to synthesize micro-/nanostructures as per the required shape and morphology with superior physical and electro-active characteristics. This work shares the fabrication and characterization of ZnSn(OH)₆ (Zinc hydroxystannate [ZHS]) prepared by facile microwave-assisted technique and furthermore converted into flexible sheets by employing lignocelluloses (LC) known as natural fibers, collected from Carica papaya leaf petiole as a substrate to provide the flexible matrix. X-ray diffraction measurements confirm the successful crystalline structure of ZHS. Scanning electron microscopy and transmission electron microscopy showed the solid spherical structure of ZHS microspheres. Fourier transform infrared spectrometry and Raman spectroscopy confirmed the composite formation of ZHS and LC-based composite sheets (ZHS/LC sheets). Electrochemical measurements that is, cyclic voltammetry (CV), Galvanostatic charge/discharge, and electrochemical impedance (EIS) spectroscopy revealed the electroactive behavior of ZHS/LC paper sheets as working electrode for energy storage applications. CV measurements revealed the specific capacitance of 100 F/g and EIS measurements confirmed the decrease in the resistance of LC fiber after the growth of ZHS microspheres. Presented flexible ZHS based paper sheets will be highly feasible for the modern bendable/flexible/disposable energy storage applications.     

Nanoconfinement of spider silk fibrils begets superior strength, extensibility, and toughness

Silk is an exceptionally strong, extensible, and tough material made from simple protein building blocks. The molecular structure of dragline spider silk repeat units consists of semiamorphous and nanocrystalline β-sheet protein domains. Here we show by a series of computational experiments how the nanoscale properties of silk repeat units are scaled up to create macroscopic silk fibers with outstanding mechanical properties despite the presence of cavities, tears, and cracks. We demonstrate that the geometric confinement of silk fibrils to diameters of 50 ± 30 nm is critical to facilitate a powerful mechanism by which hundreds of thousands of protein domains synergistically resist deformation and failure to provide enhanced strength, extensibility, and toughness at the macroscale, closely matching experimentally measured mechanical properties. Through this mechanism silk fibers exploit the full potential of the nanoscale building blocks, regardless of the details of microscopic loading conditions and despite the presence of large defects. Experimental results confirm that silk fibers are composed of silk fibril bundles with diameters in the range of 20-150 nm, in agreement with our predicted length scale. Our study reveals a general mechanism to map nanoscale properties to the macroscale and provides a potent design strategy toward novel fiber and bulk nanomaterials through hierarchical structures.     

Doppler spread estimation in mobile radio systems

In this letter, Doppler spread estimation in digital mobile radio systems is described. A maximum-likelihood approach is derived, and used to develop suboptimal approaches with lower complexity. The proposed algorithms rely on periodic channel estimation and can be used in both TDMA and CDMA systems     

Energy–exergy analysis and modernization suggestions for a combined‐cycle power plant

Energy and exergy analysis were carried out for a combined‐cycle power plant by using the data taken from its units in operation to analyse a complex energy system more thoroughly and to identify the potential for improving efficiency of the system. In this context, energy and exergy fluxes at the inlet and the exit of the devices in one of the power plant main units as well as the energy and exergy losses were determined. The results show that combustion chambers, gas turbines and heat recovery steam generators (HRSG) are the main sources of irreversibilities representing more than 85% of the overall exergy losses. Some constructive and thermal suggestions for these devices have been made to improve the efficiency of the system. Copyright © 2005 John Wiley & Sons, Ltd.     

Ozonation of synthetic versus natural textile tannins: recalcitrance and toxicity towards Phaeodactylum tricornutum.

A sound in-plant pollution control strategy can only be defined by paying due attention to bio-recalcitrance and toxicity. In this context the levels of toxicity and inert COD introduced to textile dyebath discharges by two alternative auxiliary chemicals, namely natural tannin (NT) and synthetic tannin (ST), were investigated. The effect of 40 minutes ozonation at 1,000 mg h(-1) at pH 3.5 on the segregated effluent streams containing the above-mentioned tannin formulations was evaluated in terms of changes in toxicity and recalcitrance. The effect of ozonation on the COD distribution of raw and ozonated NT and ST samples according to their molecular weight cut-offs was also assessed. Both untreated tannin formulations exerted high acute toxicity towards marine microalgae Phaeodactylum tricornutum. Moderate decrease in the toxicity levels of both tannins was observed upon ozonation. The raw NT formulation with a COD content more than twice that of its alternative raw ST had an initially inert soluble COD content of only 25 mg/L, while the initially inert COD was 135 mg/L for ST. As the initially inert soluble COD content of NT was considerably lower, this textile auxiliary did not need chemical pretreatment to improve its biodegradability. On the other hand, the initially inert soluble COD content of ST was reduced by 70% by ozone pretreatment. In terms of residual COD contents achievable after passing through a biological treatment system, raw NT and pretreated ST formulations yielded 100 and 95 mg/L COD, respectively. The highest proportion of COD (46% for NT and 88% for ST) was found in the <1 kDa range. The same fraction increased to 93% for NT after ozonation, while for ST no significant change was observed in the COD distribution of the molecular weight cut-offs after ozonation.     

An evaluation of the alternative transport fuel policies for Turkey

The search for alternative fuels and new fuel resources is a top priority for Turkey, as is the case in the majority of countries throughout the world. The fuel policies pursued by governmental or civil authorities are of key importance in the success of alternative fuel use, especially for widespread and efficient use. Following the 1973 petroleum crisis, many users in Turkey, especially in transportation sector, searched for alternative fuels and forms of transportation. Gasoline engines were replaced with diesel engines between the mid-1970s and mid-1980s. In addition, natural gas was introduced to the Turkish market for heating in the early 1990s. Liquid petroleum gas was put into use in the mid-1990s, and bio-diesel was introduced into the market for transportation in 2003. However, after long periods of indifference governmental action, guidance and fuel policies were so weak that they did not make sense. Entrepreneurs and users experienced great economical losses and lost confidence in future attempts to search for other possible alternatives. In the present study, we will look at the history of alternative fuel use in the recent past and investigate the alternative engine fuel potential of Turkey, as well as introduce possible future policies based on experience.     

Technoeconomic analysis of electricity generation from wind energy in Kutahya,Turkey

Conventional energy usage has various environmental effects that cause global warming. Renewable energy sources are thus more favorable because they have nearly zero emission. Wind energy, among the various renewable sources, finds increasing usage, concurrent with developing technology. In addition, wind is an infinite energy source. In this study, the electricity-generation ability of Kutahya has been investigated. With this aim, wind data, from the measurement station located on Bunelek Hill, Kutahya, have been collected for a period of 36 months (July 2001–June 2004). From the collected data, the electricity generated has been calculated for different types of wind turbines. The calculations have been based on the electricity requirement of the main campus of the Dumlupinar University. Finally, the economic evaluation has been analyzed using life-cycle cost analysis. For the analysis of the economical aspects, the social and CO₂ costs have also been taken into account.