Clarification and pasteurisation effects on monomeric anthocyanins and percent polymeric colour of black carrot (Daucus carota L.) juice

Black carrots (BCs) are a rich source of stable anthocyanins (ACNs). The purpose of this study was to evaluate the effects of clarification and pasteurisation on ACNs of black carrot juice (BCJ). Monomeric ACNs, ACN profile and percent polymeric colour were determined during processing of BCJ. While depectinisation and bentonite treatments resulted in 7% and 20% increases in monomeric ACN content of BCJ, respectively, gelatine–kieselsol treatment and pasteurisation resulted in 10% and 3–16% reduction. Percent polymeric colour decreased after clarification, but substantially increased in samples subjected to heat. ACNs of BCJ samples were identified by HPLC–MS. Unclarified BCJ contained cyanidin-3-galactoside-xyloside-glucoside-ferulic acid as the major ACN, followed by cyanidin-3-galactoside-xyloside-glucoside-coumaric acid, and cyanidin-3-galactoside-xyloside-glucoside. After depectinisation, two more ACNs (cyanidin-3-galactoside-xyloside and cyanidin-3-galactoside-xyloside-glucoside-sinapic acid) were also identified. These results indicated that depectinisation and bentonite treatment had positive effect on the colour of BCJ, while gelatin–kieselsol treatment and pasteurisation had negative effect.     

Influence of Eriophyid mites (Aculus olearius Castagnoli and Aceria oleae (Nalepa) (Acarina: Eriophyidae)) on some physical and chemical characteristics of Ayvalık variety olive fruit

BACKGROUND: Aculus olearius Castagnoli is a recently recorded species that damages olive fruits in the Mediterranean basin of Turkey. Thus, the effects of Eriophyid mites (Aculus olearius Castagnoli and Aceria oleae (Nalepa) (Acarina: Eriophyidae) on the olive fruits from Ayval?k variety in southern Turkey were studied for the first time in terms of some physical parameters and chemical constituents including some individual phenolics. RESULTS: The Eriophyid damaged fruits had higher L* values (lighter colour) and tyrosol level (37.53 mg kg^?1) than the undamaged fruits (28.51 mg kg^?1) in August. In contrast, Eriophyid damaged fruits were darker in colour and had lower levels (25.77 mg kg^?1) of tyrosol than those of undamaged fruits (79.14 mg kg^?1) in October. Eriophyid damaged samples had higher values of vanillic acid than the undamaged samples. An increase in the average concentrations of hydroxytyrosol and p‐coumaric acid was observed in the fruits harvested in August, whilst the oleuropein content decreased. CONCLUSION: The harvest in October can be recommended regarding the higher dimensional values, total oil, dry matter and oleuropein contents. But the interaction between harvest time and Eriophyid damage was found effective in terms of tyrosol content and skin colour; as tyrosol values were lower in the fruits harvested in October and the fruits were darker. The resistance of undamaged fruits against Eriophyid damage can be linked to high tyrosol content of these fruits. Copyright © 2010 Society of Chemical Industry     

Hygrothermal Fracture Analysis of Orthotropic Materials Using J k -Integral

A new computational method based on the J _k -integral is put forward for the purpose of conducting fracture analysis of orthotropic materials subjected to hygrothermal stresses. By utilizing the constitutive relations of plane orthotropic hygrothermoelasticity, an alternative expression for the J _k -integral is derived to replace the general limit definition. A numerical procedure is developed and integrated into a finite element analysis software to implement the proposed form of the J _k -integral. Temperature and specific moisture concentration fields, which are required in fracture calculations, are also computed through finite element analysis. Numerical results are generated by considering an embedded crack in a polymer matrix fibrous composite laminate, that is subjected to steady-state hygrothermal loading. Comparisons of the mixed-mode stress intensity factors computed by the J _k -integral based method to those evaluated via the displacement correlation technique demonstrate that, the proposed form of the J _k -integral is domain independent and leads to numerical results of high accuracy. Presented parametric analyses illustrate the influences of the fiber volume fraction and the crack location on the modes I and II stress intensity factors, the energy release rate, and the T-stress.     

Energetic and exergetic performance evaluation of the quadruple-effect evaporator unit in tomato paste production

Quadruple-effect evaporator units are commonly used in food focus area in sector is evaporative unit. It consumes about 60% of total energy input. The present study evaluates the performance of quadruple-effect evaporator unit (QEEU) by using exergy analysis based on actual operational data. A tomato paste factory is chosen for the analysis. The highest exergy destruction/loss occurs in the first effect with 158.2 kW, 52.7% of exergy input in first effect. Steam temperature should be decreased in order to decrease exergy destruction in first effect. Also, third effect achieves the highest exergy efficiency with 93.3%. Exergetic improvement potential of each effect varies between 0.3 kW and 83.6 kW. The highest and lowest exergetic improvement potential occurs in first and third effect of QEEU system, respectively. Exergetic improvement potential is equals to 52.80%, 11.10%, 6.73% and 69.8% of exergy loss/destruction from the first effect to the last effect, respectively. Total exergetic improvement potential is achieved as 128 kW (55% of total exergy loss/destruction) in QEEU system. It is expected that analyses result provide important information for designer and/or resources of multiple effect evaporator unit.     

Comparison of performance and emissions of diesel fuel,rapeseed and soybean oil methyl esters injected at different pressures

Fuel properties of rapeseed oil and soybean oil methyl esters (e.g. density, cetane number and viscosity etc.) are similar to those of the diesel fuel. These methyl esters can be used as diesel engine fuel by mixing withy diesel fuel. In this study a comparison of diesel fuel, the rapeseed oil methyl ester and the soybean oil methyl ester was made from the engine performance and emissions point of view. The tests were carried out with a four-cylinder diesel engine for tree different injection pressures such as 250, 300 and 350 bar with each of these fuels. For the purpose of comparison, tests were also conducted at full load conditions with diesel fuel. As the result, the performance and emission values of rapeseed oil (R) and soybean oil (S) methyl esters were found to be nearly the same with those of diesel fuels (D) when injection pressure was increased to 300 bar.     

Boosting the activity of FeOOH via integration of ZIF-12 and graphene to efficiently catalyze the oxygen evolution reaction

Transition metal oxyhydroxides have been used as promising electrocatalysts for water splitting however, their catalytic activity is restricted due to low surface area and poor conductivity. Herein, we report novel composite FeOOH@ZIF-12/graphene composite as electrocatalyst for water oxidation, whereby ZIF-12 provide extra surface for the FeOOH dispersion whilst graphene act as excellent electron mediator. The composite shows a low overpotential value of 291 mV to attain a current density of 10 mA cm^?2 and a low Tafel slope value of 78 mV dec^?1. The catalyst offers a maximum current density of 101 mA cm^?2, while it gives a turnover frequency (TOF) value of 0.031 s^?1 at an overpotential of 291 mV only. The excellent activity and remarkable stability of composite is attributed to highly conductive and porous support.     

KINETICS FOR LOW TEMPERATURE PYROLYSIS OF BLACK LIQUOR

A kinetic study of pyrolysis of dried black liquor was performed using a Netzsch 429 Thermogravimetric Analyzer. It was found that as conversion increases from 10 to 45% the apparent pyrolysis activation energy for black liquor increases from 77.20 to 112.74 KJ/mol. For black liquor the order of reaction was found to be first-order. The reaction rate constant was found to be 2.12×10⁹ min. These results are in agreement with the data reported by other investigators on biomass pyrolysis.     

Recent developments in catalyst synthesis using DBD plasma for reforming applications

The catalyst has a significant role in gas processing applications such as reforming technologies for H₂ and syngas production. The stable catalyst is requisite for any industrial catalysis application to make it commercially viable. Several methods are employed to synthesize the catalysts. However, there is still a challenge to achieve a controlled morphology and pure catalyst which majorly influences the catalytic activity in reforming applications. The conventional methods are expansive, and the removal of the impurities are major challenges. Nevertheless, it is not straightforward to achieve the desired structure and stability. Therefore, significant interest has been developed on the advanced techniques to take control of the physicochemical properties of the catalyst through non-thermal plasma (NTP) techniques. In this review, the systematic evolution of the catalyst synthesis using NTP technique is elucidated. The emerging DBD plasma to synthesized and effective surface treatment is reviewed. DBD plasma synthesized catalyst performance in reforming application for H₂ and syngas production is summarised. Furthermore, the status of DBD plasma for catalyst synthesis and proposed future avenues to design environmentally suitable and cost-effective synthesis techniques are discussed.     

Downcomer modification in the Jameson cell and its effects on coarse particle flotation

Jameson cell is a flotation device that has unique characteristics for fine grained particles, and thus, it has more than three hundred applications in worldwide. On the contrary, the flotation performance of the cell decreases by coarser feeding, which limits the application of the Jameson cell. It has been figured out that the main reason for the performance decrease for coarse particle is turbulence which occurs at the outlet of the downcomer in the Jameson cell. Therefore, the aim of this study was to prevent the performance decrease in the Jameson cell by modifying the downcomer which was implemented by taking into account the fluid mechanics law and mathematical modelling. The modified downcomer, which can be called as diffuser, can provide better aggregate stability and less turbulence at the end of the downcomer. Thus, theoretically the better performance was obtained by the use of the new form of downcomer. In addition, a series of experiments were carried out to verify the success of the modified downcomer. According to the results, velocity gradient (G) decreased to 640?s^?1 from 671?s^?1 by using the modified downcomer, and the maximum floatable particle size increased to 255?µm from 225?µm.     

Towards better 3-D reconstructions by combining electron tomography and atom-probe tomography

Scanning transmission electron microscope tomography and atom-probe tomography are both three-dimensional techniques on the nanoscale. We demonstrate here the combination of the techniques by analyzing the very same volume of an Al-Ag alloy specimen. This comparison allows us to directly visualize the theoretically known artifacts of each technique experimentally, providing insight into the optimal parameters to use for reconstructions and assessing the quality of each reconstruction. The combination of the techniques for accurate morphology and compositional information in three dimensions at the nanoscale provides a route for a new level of materials characterization and understanding.