Report on the therapeutic use of rimantadine and amantadine]

A discussion is carried out about the experiences with the application of rimantadine and amantadine to patients with influenza. The basic general results consisted in the fact that 2 of the 74 patients treated had a high cure percent (> 68.0%) within the first 72 hours after using the drug. No new diseased were found among the 40 contacts to whom chemoprophylaxis was applied. There were only 3.9% adverse reactions among the total number of people treated with amantadine.     

Adequacy of medical referrals to hospital emergency service

OBJECTIVE: To assess the correctness and diagnostic concordance in referrals of patients to hospital Casualty Departments (CD); and the possible differences between rural and urban health centres (HC) as well as between general practitioners (GP) and family and community medicine (FCM) specialists. DESIGN: Observational study of a crossover nature. SETTING: Health area 1 in the province of Badajoz. PATIENTS AND OTHER PARTICIPANTS: 800 patients, referred to their local hospital Casualty Department. MEASUREMENTS AND MAIN RESULTS: 50.5% of all referrals were considered justified. 15.1% of the patients referred were admitted to hospital. 50.7% of referrals from GPs were found to be correct, against 47% from FCM specialists; and 49% of those referred from rural HCs were correct, as against 45.9% of those referred from urban HCs (no significant differences). Only 54% of referrals had a diagnostic hypothesis, with diagnostic concordance at 50%. There was diagnostic concordance in 28.1% of GP referrals, against 33.3% of FCM specialists; and in 27.5% of those from rural HCs against 26.1% from urban HCs (no significant differences). CONCLUSIONS: We found no differences in the correctness of referrals or diagnostic concordance of patients seen in the CD of our city's health area, neither between patients referred from rural and urban HCs, nor between patients referred by GPs and FCM specialists.     

Use of transfer++factor in allergic bronchial asthma

The therapeutic panorama of immunomodulation and its effects on the modification of the immune reaction is reviewed. Particular reference is made to the transfer factor as a therapeutic element in bronchial asthma, which insures its efficacy or innocuity.     

Chromosome comparison between populations of the collared peccary, Tayassu tajacu, raised in captivity

The collared peccary (Tayassu tajacu) is widely distributed over the American continent, being found from the south of the USA to the north of Argentina. In Brazil, it is spread all over the country, being one of the potential species to be raised in captivity. Therefore, the cytogenetic techniques could be a potential tool for reproductive monitoring of animals raised in captivity, mainly when destined for commercial purposes. This study had the objective of determining the chromosome number of two populations raised in captivity and characterizing them by GTG banding. For this purpose, an analysis was made of mitotic metaphases obtained from lymphocyte cultures made from blood samples of 11 animals, six of which from the Northeast and five from the North of Brazil. The results of this analysis showed the same karyotype pattern for the species (2n=30 chromosomes and NF=48), besides corresponding to the South American pattern of the species, i.e., without a translocation between autosomes 1 and 8, chromosome X acrocentric, and no differences were found between the two populations studied. However, chromosomal polymorphisms were observed compared to data from the literature on populations from North and South America.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

The Electrochemistry of Liposomes

This review aims to summarize the current state of research concerning the interaction of electrodes with liposomes suspended in solutions. Main attention is given to the complex mechanism of adhesion and spreading of liposomes on mercury electrodes. That mechanism can be studied with the help of chronoamperometry, where each adhesion-spreading event appears as a capacitive current spike. Integration of these spikes produces charge versus time transients that can be modeled and simulated, revealing the details of the multi-step adhesion-spreading process. Whereas the number of spikes per time mirrors the macro-kinetics, the analysis of the time behavior of each spike mirrors the micro-kinetics of each adhesion-spreading event. The reviewed studies show that this approach provides a new tool to study the properties of liposome membranes. The adhesion-spreading of liposomes on mercury electrodes has strong similarities to the process of vesicle fusion, which makes these studies a biomimetic model allowing one to deduce the effects of foreign molecules in bilayer membranes.     

Entanglement network and relaxation temperature dependence of single‐site catalyzed ethylene/1‐hexene copolymers

In this work, we investigate the linear viscoelastic response of high molecular weight ethylene/1‐hexene copolymers, characterized by a narrow molecular weight distribution and comonomer content in the range from 0 to 10 mol %. A variation in the entanglement plateau modulus has been found in agreement with the recently developed packing length model. The packing model applied to viscoelastic data suggests decreased values of the characteristic ratio, accordingly with recent computer simulation results. The flow activation energy increases as the side chain content increases. This feature is thought to be related to the mobility of the molecules. The presence of side branches due to the comonomer hinders the mobility of the molecules, and increases the thermal barrier for the segmental motion. Then in the comonomer content range studied, the increase of the flow activation energy goes parallel with a decrease in the characteristic ratio. This result suggests that more parameters than only the stiffness of the chain modulate the thermal dependence of viscoelastic properties. A more refined study is necessary combining experiments with computer simulations in order to elucidate these aspects. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008