Analysis of pentasodium triphosphate hydration kinetics

The present work analyzes the effect of various factors on the hydration of pentasodium triphosphate. The experimental method is based on application of the hydration test. Technical-quality products with different proportions of phase I and phase II have been used. The variables studied are phase I/phase II ratio, initial temperature, particle size, stirring rate and composition of the slurry (presence of hexahydrate crystals and water hardness). The results have been discussed according to a kinetics model that includes a series of stages of a physical nature (dissolution of anhydrous salt and the crystallization of the hexahydrate), as well as of a chemical nature (solvation of the ions in solution). Crystallization of the hexahydrate may be the controlling stage in the process.     

Functional properties of a protein product from Caryodendron orinocense (Barinas nut)

The functional properties of Caryodendron orinocense protein product were investigated and compared with those of soybean (Glycina maxima). The product protein content was 24.47 g/100 g (Nx6.25). Solubility increased at both sides of the isoelectric point (pH 4.0) and with increased NaCl concentration up to 0.5M. Compared with soybean flour (50% protein), the protein product exhibited higher water and oil absorption, but lower emulsifying activity, emulsion stability, foaming capacity, and foam stability, the last one increase at higher pH. Emulsifying activity, foaming capacity, and foam stability were ionic strength dependent. C. orinocense protein product increased its emulsifying activity steadily from 0.05M to 0.75M NaCl, while it remained almost constant for soybean flour. Foaming capacity increased drastically at pH 10. The minimum time and concentration to form a gel was 20% in 4 min and 10% in 8 min for the Caryodendron protein product and soybean flour, respectively. The bulk density was 0.5056+/-0.0041 g/mL.     

Impregnation of X Zeolite with Alkaline Hydroxide During the Synthesis

Enhancement of the basic properties of the X zeolite with FAU framework has been carried out during synthesis, without further treatment such as ion-exchange or impregnation. Control of the washing stage enables retention of the optimum amount of alkaline hydroxides, which increases the basic catalytic activity of X zeolite in the alkylation of toluene. This alkaline hydroxides neither affect the FAU framework nor the silicon/aluminium molar ratio of the X zeolite. The optimum (Na + K)/Al molar ratio of the improved catalyst was 1.06 corresponding to a washing volume of 200 mL. This X zeolite presented better catalytic activity than a cesium-zeolite prepared by ion-exchange. The presence of hydroxysodalite impurity in the X zeolite increased the amount of impregnated alkaline hydroxides but not the catalytic activity. The present study shows that it is possible to increase the basic properties of the X zeolite directly in the synthesis process.     

Relation between erythrocyte free protoporphyrins and usual iron intake in a group of University of Buenos Aires students

In order to analyze the interrelationships between free erythrocyte protoporphyrins and the usual iron intake in adult students, biochemical, and hematological values, and dietary daily intake, obtained using the recall method during seven days, were studied. Hematocrit (Hto.), hemoglobin (Hb) and free erythrocyte protoporphyrins (FEP) were determined in a group of 145 female university students, healthy according to the standard parameters of the Buenos Aires University Health Department. Mean iron intake was 23.0 +/- 1.5 mg per day, about 44% being provided by animal sources; 74.5% of the population was within the recommended daily intake according to FAO/WHO; only 0.7% of the population did not cover protein requirements while 35% did not cover energy needs. Hto. and Hb were below normal levels in 7.8% of the population when compared with standards according to ICNND. To obtain information about normal values to FEP, expressed as microgram/100 ml red cells (FEP% r.c.) and FEP/Hb ratio, the group of students with adequate intake of energy and proteins who had normal values for Hb and Hto. was selected. This group, including 94 women, had a mean FEP% r.c. of 15.71 +/- 7.26 and a mean FEP/Hb ratio of 0.44 +/- 0.21. There was observed an inverse correlation between FEP% r.c. and FEP/Hb with total iron intake (r = 0.80 and r = 0.78, respectively) and between FEP% r.c. and Hb concentration (r = 0.81). These results confirm the usefulness of the free erythrocyte protoporphyrins determination as a good index of iron stores and usual intake of this population.     

Effect of temperature on the separation of some Δ9-cis-trans isomers of methyl esters of fatty acids by open tubular gas chromatography

The influence of temperature on the gas chromatographic separation ofcis-trans isomers of the methyl esters of some monounsaturated fatty acids was studied on capillary columns coated with Apiezon L, BDS and DEGS. As far as methyl oleate and methyl elaidate are concerned, the separation is better at lower temperatures on Apiezon L (180–210 C) and at higher temperatures on polyester phases (BDS, DEGS; 150–180 C). The influence of temperature on the separation ofcis-trans isomers on the three stationary phases under study is explained by the higher values of δECL/δt forcis isomers. The variation of the equivalent carbon chain length with temperature can be used for the identification ofcis-trans isomers in natural mixtures.     

The potentiometric behaviour of copolymers of methacrylic acid in water-ethanol solutions

Summary The synthesis is reported of copolymers of styrene with methacrylic acid and of methyl methacrylate with methacrylic acid by radical copolymerization, of copolymers of methyl methacrylate with methacrylic acid by partial alkaline hydrolysis of poly(methyl methacrylate), and of block copolymers of styrene with methacrylic acid. Modified titration curves of all these copolymers were recorded in water and water-ethanol solutions. In a solution containing 50 mass.% ethanol, only small differences could be observed between the potentiometric behaviour of the individual copolymers and polymethacrylic acid. Also, there were no essential differences in any of the solvents used between the potentiometric behaviour of block copolymers of styrene with methacrylic acid, on the one hand, and polymethacrylic acid, on the other. On the contrary, maxima and minima were always observed on the modified titration curves of statistical copolymers with a higher content of the hydrophobic comonomer in solutions with a high water content. Thus, using the modified titration curves, it is possible to decide whether a given copolymer is of the block or statistical type.     

Universal variable length coding for an integrated approach to image coding

We propose a new entropy coding scheme, denoted in this paper as the UVLC (universal variable length coding). It is universal in the sense that its efficiency is close to one for a large class of images. The UVLC, when it is applied to block orthogonal transforms, processes groups of blocks at the bit level, using universal codes designed for binary memoryless sources. It can be used for every video coding application, from high definition TV (HDTV) to high quality videotelephony (above 2 Mbit/s) for transform or subband coding. Last but not least, its implementation is very regular and can be realized in a single chip for the encoding oftv at theccir 601 format.     

Photoacoustic technique for simultaneous measurements of thermal effusivity and absorptivity of pigments in liquid solution

A photoacoustic (PA) methodology, in the transmission configuration, for simultaneous measurements of thermal effusivity and molar absorption coefficient (absorptivity) for pigments in liquid solution is introduced. The analytical treatment involves a self-normalization procedure for the PA signal, as a function of the modulation frequency, for a strong absorbing material in the thermally thin regime, when the light travels across the sample under study. Two fitted parameters are obtained from the analysis of the self-normalized PA amplitude and phase, one of them proportional to the sample's optical absorption coefficient and from which, taking it for a series of samples at different concentrations, the pigment's absorptivity in liquid solution can be measured, the other one yields the sample's thermal effusivity. Methylene blue's absorptivity in distilled water was measured with this methodology at 658 nm, finding good agreement with the corresponding one reported in the literature.