Validation of two tropical marine bivalves as bioindicators of mining contamination in the New Caledonia lagoon: Field transplantation experiments

The bioaccumulation and retention capacities of some key local contaminants of the New Caledonia lagoon (Ag, As, Cd, Co, Cr, Cu, Mn, Ni and Zn) have been determined in the oyster Isognomon isognomon and the edible clam Gafrarium tumidum during transplantation experiments. In a first set of experiments, oysters and clams from a clean site were transplanted into contaminated sites. Uptake kinetics determined in the field indicated that for Cr and Cu in oysters and Co, Ni, and Zn in clams, concentrations in transplanted bivalves reached those of resident organisms after 100d, whereas for the other elements, it would require a longer time for transplanted bivalves to reach the same levels as in the resident populations (e.g., up to 3 years for Cd). However, the slow uptake rate for metals observed in the latter transplantation is rather related to low bioavailability of metals at the contaminated sites than to low bioaccumulation efficiency of the organisms. Indeed, results of a second transplantation experiment into two highly contaminated stations indicated a faster bioaccumulation of metals in both bivalves. Results of both transplantations point out that the clam G. tumidum is a more effective bioindicator of mining contamination than I. isognomon, since it is able to bioaccumulate the contaminants to a greater extent. However the very efficient metal retention capacity noted for most elements indicates that organisms originating from contaminated sites would not be suitable for monitoring areas of lower contamination. Hence, geographical origin of animals to be transplanted in a monitoring perspective should be carefully selected.     

Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on carbon fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. If these nano-engineered FRC (nFRC) are destined to leave laboratories and enter industrial-scale production, a question of adapting the existing composite manufacturing methods will arise. The paper studies compressibility of woven carbon fibre performs (two types of fabrics) with CNT/CNF grown on the fibres using the CVD method. The results include pressure vs thickness and pressure vs fibre volume fraction diagrams for one and four layers of the fabric. Morphology of the nFRC is studied with SEM. It is shown that the pressure needed to achieve the target fibre volume fraction of the preform increases drastically (for example, from 0.05 MPa to more than 0.5 MPa for a fibre volume fraction of 52%) when CNT/CNF are grown on it. No change in nesting of the fabric plies is noticed. The poor compressibility can lower the achievable fibre volume fraction in composite for economical vacuum assisted light-RTM techniques and increase the pressure requirements in autoclave processing.     

Combined microwave and enzymatic treatments for ��-lactoglobulin and bovine whey proteins and their effect on the IgE immunoreactivity

Effect of combined microwave (MW) and enzymatic hydrolysis on the human immunoglobulin E (IgE)-binding properties of ??-lactoglobulin (??-lg) and other whey proteins (WP) was investigated. Separated ??-lg and full whey protein isolate (WPI) were hydrolyzed with trypsin, chymotrypsin, mixture of trypsin/chymotrypsin, and pepsin at three microwave power levels: 50?W during 1 and 5?min, 100 and 200?W during 1 and 3?min. The immunoreactivity of the obtained hydrolysates resulting from combined microwave protease treatment was assessed using sera of young patients allergic to bovine whey proteins. The application of microwave treatment at 200?W enhances the hydrolysis of ??-lg by pepsin in 3?min and decreases significantly its immunoreactivity. The extensive hydrolysis of the microwave-treated ??-lg and WPI with trypsin, chymotrypsin, and the mixture of trypsin with chymotrypsin did not have an impact on the IgE binding of the products obtained in all the studied conditions.     

High energy dry coating mixing: Elements on velocities,temperatures and melting

In dry coating processes no liquid, solvent, binder or water, is required. This makes them advantageous compared to wet coating alternative: being low cost, no drying step required, environmentally friendly (no volatile organic compounds related problems) and simple in operation. But there is still a lack of fundamental knowledge of the implied mechanisms. Often the process itself has been empirically designed and is not always well characterized.In this work, some hydrodynamic elements are developed in a high energy mixer used for dry coating: the specific behavior of the Nara hybridizer NHS-0 is investigated. In the first part, recirculation velocities and temperatures are derived during the process, or when the purge is on. The effects of the pressure purge and of the rotor velocity on the purge and the effect of the rotation on the temperature increase are studied. In the second part, a simple experimental approach is carried out to derive qualitatively the local temperature inside the apparatus with the help of polymers with different melting temperatures. This approach illustrates a first step for dry coating application with waxes.     

Choice of a pertinent color space for color texture characterization using parametric spectral analysis

This article presents a comparison of different color spaces including RGB, IHLS and L?a*b* for color texture characterization. This comparison is based on the fusion of the independent spatial structure and color feature cues. In IHLS and L*a*b*, two channel complex color images are created from the luminance and the chrominance values. For such images, two dimensional complex multichannel linear prediction models are used to perform parametric power spectrum estimation and the structure feature cues are computed from this estimated power spectrum. Quantitative comparison of auto spectra of luminance and combined chrominance channels for different color spaces is done. This comparison is based on the degree of decorrelation between luminance and chrominance information provided by different color space transformations. Three dimensional histograms are used as color feature cues. Then, to classify color textures, Kullback-Leibler divergence based symmetric distance measures are calculated for pure color, luminance structure and chrominance structure feature cues. Individual as well as combined effect of information from all feature cues on classification results is then compared for different color spaces and different color texture data sets. The proposed color texture classification method performs better than the state of the art methods in certain cases. The L*a*b* color space gives us a better characterization of the chrominance spatial structure as well as the overall spatial structure for all of the chosen data sets. Experimental results on pixel classification of color textures are also presented and discussed.     

Thermal Resonance at the Microscale in AC Scanning Thermal Microscopy with a Thermal-Resistive Probe

Investigation of the thermal-resistive probe response in an AC scanning thermal microscope (SThM) as a function of the distance probe–material surface under ambient conditions and the current excitation frequency is presented. The analysis of temperature experimental results points out a phenomenon which can be interpreted as a thermal wave resonance. The modeling of the thermal response with the finite element method considering the surrounding medium as a thermally conducting medium tends to confirm this. This phenomenon is independent of the sample nature and is related to the thermal diffusion length of the air medium between the probe and the sample. An equivalent resonance factor is defined: it shows a linear dependence with the characteristic distance for which the thermal resonance phenomenon is an extremum. The system—probe/sample surface—behaves as a resonant cavity at the microscale. This configuration is not specific to a SThM and can occur within electronic devices.     

The structure solution of the F-type i-ZnMgHf from the X-ray diffraction

ABSTRACT

We report a successful growth of the ZnMgHf F-type icosahedral quasicrystal in the form of faceted single grains. By varying the heat treatment parameters we were able to obtain single crystals with a quality suitable for a single crystal X-ray diffraction which was conducted in a synchrotron facility. Ab initio structure solution by a charge flipping algorithm manifests the existence of two types of Bergman clusters. Clusters are differentiated by the preferential occupation of the high-symmetry positions by hafnium in a rhombic triacontahedron, being the outer shell of the atomic cluster.

This paper is part of a Thematic Issue on The Crystallographic Aspects of Metallic Alloys.     

Using pore space 3D geometrical modelling to simulate biological activity: Impact of soil structure

This study is the follow-up to a previous one devoted to soil pore space modelling. In the previous study, we proposed algorithms to represent soil pore space by means of optimal piecewise approximation using simple 3D geometrical primitives: balls, cylinders, cones, etc. In the present study, we use the ball-based piecewise approximation to simulate biological activity. The basic idea for modelling pore space consists in representing pore space using a minimal set of maximal balls (Delaunay spheres) recovering the shape skeleton. In this representation, each ball is considered as a maximal local cavity corresponding to the “intuitive” notion of a pore as described in the literature. The space segmentation induced by the network of balls (pores) is then used to spatialise biological dynamics. Organic matter and microbial decomposers are distributed within the balls (pores). A valuated graph representing the pore network, organic matter and microorganism distribution is then defined. Microbial soil organic matter decomposition is simulated by updating this valuated graph. The method has been implemented and tested on real data. As far as we know, this approach is the first one to formally link pore space geometry and biological dynamics. The long-term goal is to define geometrical typologies of pore space shape that can be attached to specific biological dynamic properties. This paper is a first attempt to achieve this goal.     

Low speed lifting cable diagnosis using instantaneous angular speed

Journal of Mechanical Science and Technology - This paper describes an experimental study of lifting cable fault diagnostic based on instantaneous angular speed (IAS) technique. During the study...