Changes in Fatty Acid, Tocopherol and Xanthophyll Contents During the Development of Tunisian-Grown Pecan Nuts

Among oil compounds, fatty acids, tocopherols and xanthophylls (lutein and zeaxanthin) are of special interest due to their nutritional properties. The identification and quantification of these compounds in pecan nuts (Carya illinoinensis) could therefore be very useful to produce functional foods rich in compounds of this type. This paper reports studies on their accumulation and the effect of ripening on the content of these high value-added compounds. The total lipid content increased during the ripening. Saturated and polyunsaturated fatty acids decreased significantly, whereas, monounsaturated fatty acids increased during the ripening of pecan nut fruit. Maximum levels of total tocopherol (279.53 mg/kg oil) and xanthophyll (6.18 mg/kg oil) were detected at 20th weeks after the flowering date. These amounts decreased gradually as ripening advances. The early stages of pecan ripening seem to have nutritional and pharmaceutical interests. These results may be useful for evaluating the pecan nut quality and determining the optimal period when the pecans accumulated the maximum of these nutritional and healthy compounds.     

High‐Temperature Creep Behavior of Dense SiOC‐Based Ceramic Nanocomposites: Microstructural and Phase Composition Effects

In this work, dense monolithic polymer‐derived ceramic nanocomposites (SiOC, SiZrOC, and SiHfOC) were synthesized via hot‐pressing techniques and were evaluated with respect to their compression creep behavior at temperatures beyond 1000°C. The creep rates, stress exponents as well as activation energies were determined. The high‐temperature creep in all materials has been shown to rely on viscous flow. In the quaternary materials (i.e., SiZrOC and SiHfOC), higher creep rates and activation energies were determined as compared to those of monolithic SiOC. The increase in the creep rates upon modification of SiOC with Zr/Hf relies on the significant decrease in the volume fraction of segregated carbon; whereas the increase of the activation energies corresponds to an increase of the size of the silica nanodomains upon Zr/Hf modification. Within this context, a model is proposed, which correlates the phase composition as well as network architecture of the investigated samples with their creep behavior and agrees well with the experimentally determined data.     

New potential for preparation of performing h-BN coatings via polymer pyrolysis in RTA furnace

An innovative IR irradiation annealing process is used to increase the crystallization ratio of hexagonal boron nitride (h-BN) coatings on pure titanium pellets. Since the polymer pyrolysis route requires heating the green polymer at high temperature to convert it into a ceramic, the use of IR radiation furnace (compared to a resistive furnace) allows achievement of better crystallized h-BN while the substrate remains at relatively low temperature (<1000 °C). Annealing treatments have been performed under argon or nitrogen using either a halogen lamp or a Rapid Thermal Annealing (RTA) furnace. Advanced structural and chemical characterizations have shown a good chemical stability of the coatings. In addition, it has been revealed that samples annealed under Ar present a micro-composite structure at the interphase composed of a μ-layer of TiB₂/TiB/Ti(N)_x between the coating and the substrate, whereas samples annealed under nitrogen display a simpler structure at the interphase, with only TiN.     

EIS evaluation of the filiform corrosion of aluminium coated by a cataphoretic paint

Filiform corrosion is mainly considered as a cosmetic attack and is undesirable in most applications. The initiation and propagation of the filaments are related to different parameters such as the presence of defects, the permeability of the coating to water and oxygen, the adherence of the paint system and the presence of salts.

The aim of this work is to study the behaviour of painted aluminium samples towards filiform corrosion or delamination. The 6082 Aluminium alloy was selected and the samples were covered with a cataphoretic epoxy primer without lead (PPG Industries France). Prior to the application of the electrocoat, the samples were pre-treated by a commercial Zr/Ti or chromate conversion treatment or simply etched with a commercial acid etching product.

Filiform corrosion was studied by the normalized test (ISO/DIS 4623): painted and scratched samples were inoculated in HCl and exposed in a constant humidity chamber at 40 °C and 82% RH for 3 weeks. After exposure the samples were subjected to a visual and optical microscopic examination.

Electrochemical impedance spectroscopy was used to study the sensitivity to filiform corrosion. The operating mode of this test is similar to the normalized one. The samples were scratched before inoculation for 1 h in HCl and then exposed to the humidity chamber for a maximum of 4 days. The samples were tested by EIS in an acidified 0.1 M Na₂SO₄ electrolyte solution. The resulting impedance spectra were analyzed with an appropriate equivalent electrical circuit which allows the evaluation of the exposed metallic surface area, directly related to the extent of filiform corrosion or delamination. Different parameters were varied: the exposure time in the humidity chamber; the immersion time in the electrolyte sulphate solution as well as its pH and the coating thickness.     

Measurement of enzymatic activity and specificity of human and avian influenza neuraminidases from whole virus by glycoarray and MALDI-TOF mass spectrometry

Influenza neuraminidases hydrolyze the ketosidic linkage between N-acetylneuraminic acid and its adjacent galactose residue in sialosides. This enzyme is a tetrameric protein that plays a critical role in the release of progeny virions. Several methods have been described for the determination of neuraminidase activity, usually based on colorimetric, fluorescent, or chemiluminescent detection. However, only a few of these tests allow discrimination of the sialyl-linkage specificity (i.e., α2-3- versus α2-6-linked sialyllactosides) of the neuraminidase. Herein we report a glycoarray-based assay and a MALDI-TOF study for assessing the activity and specificity of two influenza neuraminidases on whole viruses. The human A(H3N2) and avian A(H5N2) neuraminidase activities were investigated. The results from both approaches demonstrated that α2-3 sialyllactoside was a better substrate than α2-6 sialyllactoside for both viruses and that H5N2 virus had a lower hydrolytic activity than H3N2.     

Correlation between mechanical properties and orientation of the crystalline and mesomorphic phases in isotactic polypropylene fibers

The microstructure and mechanical properties of melt-spun isotactic polypropylene (iPP) fibers were studied for different take-up velocities and throughputs with a combination of small- and wide-angle X-ray scattering, calorimetry and tensile tests. With the increase of take-up velocity the mesomorphic fraction of the fibers steadily decreases while the crystalline fraction increases. The addition of an alpha-nucleating agent led to an increase of crystallinity and a slight decrease of the orientation factor. By contrast, a beta-nucleator resulted in a complete suppression of the fiber crystallinity. The orientation factor of the mesophase and/or crystalline phase is found to have a one-to-one correlation with the fiber tenacity and deformation at break. At the same time, the absolute values of crystallinity and/or mesomorphicity are fully uncorrelated with these mechanical characteristics. The observed correlations can be used for example to design and control the fiber mechanical properties by tuning the processing conditions such as take-up velocity, throughput and addition of nucleating agents.     

Electromagnetic modeling of waveguide amplifier based on Nd<Superscript>3+</Superscript> Si-rich SiO<Subscript>2</Subscript> layers by means of the ADE-FDTD method

By means of ADE-FDTD method, this paper investigates the electromagnetic modelling of a rib-loaded waveguide composed of a Nd³⁺ doped Silicon Rich Silicon Oxide active layer sandwiched between a SiO₂ bottom cladding and a SiO₂ rib. The Auxilliary Differential Equations are the rate equations which govern the levels populations. The Finite Difference Time Domain (FDTD) scheme is used to solve the space and time dependent Maxwell equations which describe the electromagnetic field in a copropagating scheme of both pumping (λ _pump = 488 nm) and signal (λ _signal = 1064 nm) waves. Such systems are characterized by extremely different specific times such as the period of electromagnetic field ~ 10^-15 s and the lifetimes of the electronic levels between ~ 10^-10s and ~ 10^-4 s. The time scaling method is used in addition to specific initial conditions in order to decrease the computational time. We show maps of the Poynting vector along the propagation direction as a function of the silicon nanograin (Si-ng) concentrations. A threshold value of 10²⁴ Si-ng m^-3 is extracted below which the pump wave can propagate so that a signal amplication is possible.     

Experimental and modelling of supercritical oil extraction from rapeseeds and sunflower seeds

The supercritical oil extraction from oleaginous seeds (sunflower and rapeseeds) is presented here through experimental and modelling results. The experimental setup allows an accurate following of the mass of the oil extracted and to derive the experimental influences of pressure, temperature and supercritical CO₂ flowrate on the extraction curves. These parameters are very sensitive and highlight the necessity of precise optimisation of experimental conditions. In order to complete the behaviour of supercritical fluids extraction, an improved modelling is proposed. The modelling basic equations are based on others modelling published previously. In this work, the determination of several parameters comes from correlations and the other constants are fitted with all the experimental results. Thus the modelling is more representative and predictive as other ones. The modelling results present a good agreement with the experimental results, and hence it can be used for the dimensioning of some extraction autoclaves.