Stochastic communication for application-specific Networks-on-Chip

In this paper, we have developed analytical stochastic communication technique for inter and intra-Networks-on-Chip (NoC) communication. It not only separates the computation and communication in Networks-in-Package (NiP) but also predicts the communication performance. Moreover, it will help in tracking of the lost data packets and their exact location during the communication. Further, the proposed technique helps in building the Closed Donor Controlled Based Compartmental Model, which helps in building Stochastic Model of NoC and NiP. This model helps in computing the transition probabilities, latency, and data flow from one IP to other IP in a NoC and among NoCs in NiP. From the simulation results, it is observed that the transient and steady state response of transition probabilities give state of data flow latencies among the different IPs in NoC and among the compartments of NoCs in NiP. Furthermore, the proposed technique produces low latency as compared to the latencies being produced by the existing topologies.     

A framework for joint community detection across multiple related networks

Community detection in networks is an active area of research with many practical applications. However, most of the early work in this area has focused on partitioning a single network or a bipartite graph into clusters/communities. With the rapid proliferation of online social media, it has become increasingly common for web users to have noticeable presence across multiple web sites. This raises the question whether it is possible to combine information from several networks to improve community detection. In this paper, we present a framework that identifies communities simultaneously across different networks and learns the correspondences between them. The framework is applicable to networks generated from multiple web sites as well as to those derived from heterogeneous nodes of the same web site. It also allows the incorporation of prior information about the potential relationships between the communities in different networks. Extensive experiments have been performed on both synthetic and real-life data sets to evaluate the effectiveness of our framework. Our results show superior performance of simultaneous community detection over three alternative methods, including normalized cut and matrix factorization on a single network or a bipartite graph.     

Evaluation of hot corrosion resistance of HVOF coatings on a Ni-based superalloy in molten salt environment

High-velocity oxy-fuel (HVOF) has the advantage of being a continuous and most convenient process for applying coatings to industrial installations at site. In this study, Cr₃C₂–NiCr, NiCrBSi, Stellite-6 and Ni–20Cr coatings were deposited on a Ni-based superalloy (19.5Cr–3Fe–0.3Ti–0.1C–balance Ni) using an HVOF process. Hot corrosion studies were performed on bare as well as coated superalloy specimens after exposure to a molten salt environment at 900 °C under cyclic conditions. The thermogravimetric technique was used to establish the kinetics of corrosion. XRD, SEM/EDAX and EPMA techniques were used to analyse the corrosion products. The hot corrosion resistance of all the coatings were superior to bare superalloy. Among the coatings studied, the Ni–20Cr coated superalloy imparted maximum hot corrosion resistance, whereas the Stellite-6 coated indicated minimum resistance. The hot corrosion resistance of all coatings may be attributed to the formation of oxides and spinels of nickel, chromium or cobalt.     

New method for threshold voltage extraction of high-voltage MOSFETs based on gate-to-drain capacitance measurement

This letter reports on the extraction of the threshold voltage of laterally diffused MOS transistors. A clear analysis of the device physics is performed, highlighting the correlation between the change of the electron charge distribution along the channel and the device capacitance variations when the gate voltage is swept. Using numerical simulations, it is shown that the peak of the gate-to-drain capacitance is related to the transition of the surface from weak to moderate inversion in the intrinsic MOS transistor at the location of the maximum doping concentration, which corresponds to the threshold voltage of the device according to the MOS theory. Comparison between conventional I/sub D///spl radic/g/sub m/ extraction and the new proposed capacitance peak method is performed on both technology computer-aided design simulations and measurements in order to confirm the new experimental technique and related theory.     

Influence of Liquid Phase Additives on Structural and Sintering Behaviour of Samarium Modified Lead Titanate Ceramics

The combination of metal oxides Bi₂O₃:Li₂O in a ratio 89:11 gives a eutectic with a melting point of ～680°C. Such a low melting point oxide combination creates a working liquid phase at a highly favorable temperature for use as a densification aid. A liquid—phase sintering aid incorporating Bi₂O₃ and Li₂O is presented which demonstrates not only a reduction in the required sintering temperature but also shows relatively higher ‘c/a’ ratio (tetragonality) of PbTiO₃ ceramics with no fragility of the samples. Detailed dilatometric investigations have been performed in order to study the dominant shrinkage mechanism in the present system. Besides acting as a liquid phase fluxing agent, Bi₂O₃/Li₂O also behave as Curie shifter, which decreases Curie temperature in lead titanate system. The Curie temperature has also been verified from the thermal expansion behavior of sintered specimens. The value of dielectric constant increases after poling which may be due to the dominance of 180° domain wall over 90°.     

Designing communication strategies for heterogeneous parallel systems

This paper explores the suitability of the emerging passive star-coupled optical interconnection using wavelength division multiplexing as the system interconnect to provide high bandwidth (Gbits/sec) communication demanded by heterogeneous systems. Several different communication strategies (combinations of communication topologies and protocols) are investigated under a representative master-slave computational model. The interplay between system speed, network speed, task granularity, and degree of parallelism is studied using both analytical modeling and simulations. It is shown that a hierarchical ALOHA-based communication strategy between the master and the slaves, implemented on top of the passive star-coupled network, leads to a considerable reduction in channel contention and provides 50–80% reduction in task completion time for applications with medium to high degrees of coarse grain parallelism. Comparable reduction in channel contention is also shown to be achieved by using tunable acoustooptic filters at master nodes.     

Effect of solid polymer electrolyte on the sensitization of photocurrents in solid-state electrochemical cells using conducting polypyrrole

The effect of small concentration of methylene blue dye on photocurrents was studied in the solid-state photoelectrochemical cells fabricated using conducting polypyrrole-coated electrodes sandwiched with solid-polymer electrolyte, namely, polyvinylpyrrolidone with phosphoric acid. A maximum photosensitivity factor (S=I _l/I _d, where I _l is the photocurrent and I _d is the dark current) of the order of 5 is observed. The current–voltage (I–V) characteristics in such cells reveal that charge transport is mainly governed by the space charge effect. Comparison of the results presented in this paper with the ones we reported earlier [23] indicates that the matrix in which dye has been incorporated plays an important role in such sensitization processes. A matrix that can efficiently transport the photogenerated charge carriers is observed to be more suitable for such dye-sensitized devices.     

Abrasive wear behaviour of hardened high strength boron steel

Abstract

Abrasive wear in industrial applications such as mining, materials handling and agricultural machinery constitutes a large part of the total wear. Hardened high strength boron steels are known for their good wear resistance and mechanical properties, but available results in the open literature are scarce. This work aims at investigating how different quenching techniques affect the two-body abrasive wear resistance of hardened high strength boron steels. Furthermore, the wear as a function of depth in thicker hardened high strength boron steel plates has also been studied. The material characterisation has been carried out using microhardness, SEM/energy dispersive spectroscopy and three-dimensional optical surface profilometry. The results have shown that water quenched and tool quenched high strength boron steel had similar wear resistance. The main wear mechanisms appear to be microcutting combined with microfatigue. Workhardening during the abrasion process has been found to affect the abrasive wear.     

Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station

Failure investigation was carried out on boiler water wall tubes of a thermal power plant through visual inspection, chemical analysis, and metallurgical analysis. Failure was in the form of thin/micro cracks along the length of the tubes which were located at the girth welding joint of tubes. Experimental results revealed that the cracking was from inward to outward of the tube thickness. Discontinuities/cavities were observed in the welded region which might have occurred due to lack of fusion of base metal and the weld metal. Cracks were initiated from the sharp corner/crack tip of the cavities/discontinuities present at the welded region under the action of hoop/thermal stress existed during the operation. Nature of the crack propagation indicates the case of typical hydrogen-induced cracking. Moreover, the presence of the cavities/discontinuities reduced the cross-sectional area of tubes resulting increased stress intensity. Increased stress beyond the flow stress of the material assisted by hydrogen-induced effect resulted the cracking of the tubes. In order to mitigate the problem, proper welding of tubes joints should be carried out followed by proper inspection after weld. Secondly, hydrogen dissolution during welding should be prevented and treatment for its removal after welding should be carried out.