Poly(3,4-ethylenedioxythiophene)-ionic liquid functionalized graphene/reduced graphene oxide nanostructures: improved conduction and electrochromism

Nanocomposite assemblies of poly(3,4-ethylenedioxythiophene) (PEDOT), embedded with (a) fluoro alkyl phosphate based ionic liquid functionalized graphene (ILFG) and (b) reduced graphene oxide (RGO) prepared from a modified Hummers' method, have been synthesized. Defect free graphene nanosheets within the size of a few nanometers were achieved in the PEDOT-ILFG nanocomposite. In contrast, structures comprising graphene oxide wrinkles interspersed with the amorphous polymer were obtained in the PEDOT-RGO nanocomposite. X-ray photoelectron spectroscopy showed that neat ILFG was considerably less oxidized as compared to the neat RGO, which ratified the superiority of the ionic liquid functionalization strategy over the conventional chemical approach, for exfoliating graphite. Substantially higher electrochemical activity, improved ionic/electronic conductivity, much faster switching rates, and an almost ballistic enhancement in the electrochromic coloration efficiency attained for the PEDOT-ILFG nanocomposite in comparison to PEDOT-RGO film were irrefutable proofs that demonstrated the ability of the ionic liquid to not only fortify the structure of graphene but also facilitate charge transport through the bulk of the film, by providing less impeded pathways. Since PEDOT-ILFG/-RGO nanocomposites of good uniformity have been achieved, this, to some extent, addresses the challenge associated with the processing of graphene based high performance materials for practical applications.     

Failure analysis of threaded connections in large-scale steel tie rods

Steel tie rods are very important load-carrying components in applications where high levels of pre-stresses are required. The bearing capacity of a steel tie rod is determined not only by the strength of the rod body, but also by the strength of the threaded connection that resists force. Analysis of the strength of the threaded connection and determining the optimal number of turns of thread engagement is critical to ensure structural safety. This paper reports the results of full-scale tensile rupture experiments on two categories of large-scale steel tie rods provided by China JULI Corporation: (i) LG75-00 steel tie rods with triangle threaded connection, and (ii) LG100-00 steel tie rods with trapezoidal threaded connection. The full-scale tensile rupture experiments were carried out to test the maximum allowable axial working load under different numbers of turns of engaged threads. The results of these experiments suggest strong guidelines on the minimum number of turns of thread engagement for preventing the failure of thread teeth of steel tie rods in practical shear and bending applications.     

Emulsion polymerization of linseed and safflower acrylates and methacrylates

Acrylic and methacrylic esters of mixed fatty alcohols derived from linseed and safflower oils were homopolymerized, by emulsion polymerization technique, yielding polymers that gave hard, gloosy films with excellent flexibility and good water and chemical resistance.     

Effect of Additives on the Electromechanical Properties of Pb(Zr,Ti)O3–Pb(Y2/3W1/3)O3 Ceramics

Dielectric and piezoelectric properties of 0.02Pb(Y_2/3W_1/3)O₃ 0.98Pb(Zr0.52Ti0.48)O3 ceramics doped with additives (Nb₂O₅, La₂O₃, MnO₂, and Fe₂O₃) were investigated. The grain sizes of these ceramics decreased with increasing amounts of additives. For additions of MnO₂ and Fe₂O₃, dielectric losses decreased, while for Nb₂O₅ and La₂O₃, these values increased. The maximum values of the mechanical quality factor Q_m were found to be 956 and 975 for additions of 0.9 wt% Fe₂O₃ and 0.7 wt% MnO₂, respectively, but donor dopants (Nb₂O₅ and La₂O₃) did not change the values of Q_m . On the other hand, the piezoelectric constant d₃₃ and the electromechanical coupling factor k_p decreased with additions of MnO₂ and Fe₂O₃, but improved with additions of Nb₂O₅ and La₂O₃.     

Solid acid (superacid) catalyzed regioselective adamantylation of substituted benzenes

Adamantylation of substituted benzenes with 1-bromo-adamantane was catalyzed by solid acids including acidic ion exchange and ionomer resins, HY zeolite, sulfated zirconia and supported superacids on HY zeolite and SiO₂. Adamantylation generally takes place in excellent yield giving predominantly para products without formation of byproducts. The reactions did not require the usual workup of Friedel-Crafts reactions as catalysts were simply filtered of. Cross-linked polystyrene resin sulfonic acid (Amberlyst) was found particularly suitable as besides its high catalytic activity, high regioselectivity was observed with almost exclusive formation ofp-adamantylated benzenes. AMI, PM3 and MNDO semiempirical calculations of heats of formation showed that of all regioisomers, the para isomer is the most stable. The temperature dependence of adamantylation was also investigated allowing the optimization ofp-substituted product in high yield and excellent selectivity. Lack of isomerization of 1-p-tolyla-damantane using solid (Amberlyst, Nafion-H) and liquid acids (neat and modified trifluoromethanesulfonic acid) indicates absence of product isomerization, while the intramolecular rearrangement of the intermediate arenium complex is still possible.Catalysis by solid superacids, Part 30. For part 29, see ref.[1A].