Densification Kinetics of CeO<Subscript>2</Subscript> Reinforced 8 Mol.% Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Stabilized ZrO<Subscript>2</Subscript> Ceramics

The grain growth kinetics of 8YSZ ceramics processed using spark plasma sintering (SPS) has been investigated in the temperature ranging from 1100°C to 1500°C. The activation energy during SPS densification was obtained as 332 kJ/mol with grain boundary diffusion as a dominant mechanism. Further, the effect of CeO₂ on the densification kinetics of 8YSZ ceramic processed via SPS and conventional sintering (CS) has been delineated. The lower grain boundary mobility of CS-processed composites (an order of magnitude lower than SPS) is attributed to the solute drag and lattice distortion mechanism. However, no significant change in the grain boundary mobility was observed with CeO₂ addition (~?14.7–43.9?×?10^?18 m³/N/s for CS and 107.2–116.7?×?10^?18 m³/N/s for SPS) revealing that the defect concentration is nearly constant in 8YSZ. The study highlights the effect of sintering techniques (SPS and CS) and reinforcement (CeO₂) on engineering the desired microstructure of 8YSZ ceramic.     

Reduction of seawater scale forming potential using the fluidized bed crystallization technology

A fluidized bed crystallization technology was found to be a feasible method for the reduction of scaling tendency of seawater. Seeded crystallization experiments in a pilot plant fluidized bed crystallizer were conducted. The obtained results for seawater, with initial salinity of 55.75 g/kg and initial pH of 8.23 at a constant temperature of 50 °C, have proven that the Ryznar Stability Index of seawater has been changed dramatically from its initial value of 4.77 (in the range of high scaling potential) to the value of 5.10 (in the range of middle to small scaling potential) over a time period of 180 min.     

Role of alloyed silicon and some inorganic inhibitors in the inhibition of meta-stable and stable pitting of Al in perchlorate solutions

The study of both meta-stable and stable pitting events on the surface of pure Al and three Al–Si alloys, namely (Al + 6%Si), (Al + 12%Si) and (Al + 18%Si) alloys, was carried out in deaerated neutral NaClO₄ solutions of various concentrations (10⁻⁴–10⁻² M). Measurements were carried out under the effect of various experimental conditions using potentiodynamic anodic polarization and potentiostatic techniques. The results presented below showed that meta-stable pits (appeared as oscillations in current) form at potentials close to the pitting potential (E _pit) and during the induction time for stable pit formation. Various factors affecting the rate of meta-stable and stable pits were studied. The presence of Si as an alloying element in Al reduces the rate of formation of meta-stable pits, corresponding to a reduction in the probability of developing stable pits, and an increase in the pitting potential results. The inhibitive effects of chromate, silicate, molybdate and tungstate on pitting corrosion in Al were also studied. Results obtained showed that these known inhibitors retard both meta-stable and stable pitting events. This makes attainment of stable pit growth more difficult in presence of these inhibitors.

Manifestation of external size reduction effects on the yield point of nanocrystalline rhodium using nanopillars approach

In this study, pure rhodium was fabricated and mechanically investigated at the nanoscale for the first time. The nanopillars approach was employed to study the effects of size on the yield point. Nanopillars with different diameters were fabricated using electroplating followed by uniaxial compression tests. Scanning electron microscopy (SEM) was used as a quality control technique by imaging the pillars before and after compression to ensure the absence of cracks, buckling, barrelling or any other problems. Transmission electron microscopy and SEM were used as microstructural characterization techniques. Due to substrate-induced effects, only the plastic region of the stress–strain curves were investigated, and it was revealed that the yield point increases with size reduction up to certain limit, then decreases with further reduction of the nanopillar size (diameter). The later weakening effect is consistent with the literature, which demonstrates the reversed size effect (the failure of the plasticity theory) in nanocrystalline metals, i.e. smaller is weaker. In this study, however, the effect of size reduction is not only weakening, but is strengthening-then-weakening, which the authors believe is the true behavior of nanocrystalline materials.     

Mechanisms of Nausea and Vomiting: Current Knowledge and Recent Advances in Intracellular Emetic Signaling Systems

Nausea and vomiting are common gastrointestinal complaints that can be triggered by diverse emetic stimuli through central and/or peripheral nervous systems. Both nausea and vomiting are considered as defense mechanisms when threatening toxins/drugs/bacteria/viruses/fungi enter the body either via the enteral (e.g., the gastrointestinal tract) or parenteral routes, including the blood, skin, and respiratory systems. While vomiting is the act of forceful removal of gastrointestinal contents, nausea is believed to be a subjective sensation that is more difficult to study in nonhuman species. In this review, the authors discuss the anatomical structures, neurotransmitters/mediators, and corresponding receptors, as well as intracellular emetic signaling pathways involved in the processes of nausea and vomiting in diverse animal models as well as humans. While blockade of emetic receptors in the prevention of vomiting is fairly well understood, the potential of new classes of antiemetics altering postreceptor signal transduction mechanisms is currently evolving, which is also reviewed. Finally, future directions within the field will be discussed in terms of important questions that remain to be resolved and advances in technology that may help provide potential answers.     

Strain mediated enhancement in magnetoelectric properties of sonochemically synthesized piezoelectric and piezomagnetic composites

Materials with magneto-electric (ME) properties are of great importance because of their demand in electronic industries. Three dimensional nano-particles of the ME-composites having the general formula (1-x)CoCr_0.3Fe_1.7O₄(CCFO)+(x)BaTiO₃(BTO) (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) were obtained by comprising the piezoelectric-BTO and piezomagnetic-CCFO phases. The individual phases of CCFO and BTO were synthesized separately by ultrasonic irradiation assisted sonochemical and sol-gel routs. X-ray diffraction patterns (XRD) confirmed the well-crystalline nature of both the phases. BTO and CCFO phases were under tensile strain as confirmed by the variation in lattice constants with varying proportion of BTO and CCFO. An energy-dispersive X-ray spectroscopy spectrum confirmed the phase purity of the samples and stoichiometric concentration of elements. Magnetic properties were investigated by M ? H loop measurements and dielectric properties by using RF impedance analyzer. Dielectric constant increased with the increasing percentage of BTO. The maximum value of ME coefficient (24.7 mV/cm?Oe) is observed for the 60%CCFO+40%BTO sample. The obtained results were discussed in the light of grain size, strain and the basic properties of the individual phases. The prepared materials can be applicable in electronic devices where high magneto-electric coefficient is desirable.     

Characterization of boride coatings on a ductile cast iron

In this work, the EN-GJS-400-15 cast iron was pack-borided in a powder mixture composed of 5% B₄C, 5% NaBF₄ and 90% SiC at the three temperatures: 900, 950 and 1000°C for 2, 4 and 6 h, respectively. The pack-borided EN-GJS-400-15 cast iron was characterized by the following experimental techniques: optical microscopy, XRD analysis and Microhardness Vickers tester. The growth kinetics of boride layers was also investigated. As a consequence, the boron activation energy was found to be 212.28 kJ mol^–1 for the EN-GJS-400-15 cast iron. Based on a regression model, a useful equation was derived to estimate the boride layer thickness as a function of the boriding parameters (time and temperature). A good agreement was then obtained between the predicted values of boride layers thicknesses and those measured experimentally. In addition, an iso-thickness diagram was proposed to be used as a simple tool to select the boride layers thicknesses according to the potential applications of EN-GJS-400-15 cast iron in industry.     

A novel,efficient procedure for acylation of cellulose under homogeneous solution conditions

Commercially available cellulose (Avicel PH101) was successfully acylated under homogeneous solution conditions by the following novel procedure: 2.0 g of cellulose and 5.0 g of LiCl were introduced into a glass reactor, magnetic stirring was started, the pressure was reduced to 2 mmHg, the temperature was raised to 110°C in 30 min, and the reactor was kept under these conditions for another 30 min. N,N‐Dimethylacetamide, 60 mL, was introduced, atmospheric pressure was restored, and the temperature was raised to 150°C in 30 min. The system was kept under these conditions for 1 h, then the temperature was decreased to 40°C; in 2 h a clear cellulose solution was obtained. Acid anhydride was added, and the solution was stirred at 60°C for additional 18 h. Acetates, propionates, butyrates, and acetate/butyrate mixed ester were prepared with excellent reproducibility of the degree of substitution, from 1 to 3. The degree of polymerization of cellulose is negligibly affected by these reaction conditions. The distribution of the acetyl moiety among the three OH groups of the anhydroglucose unit follows the order C₆ > C₂ > C₃. Features relevant to the industrial application of this novel procedure are discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1355–1360, 1999     

Aluminizing nickel foam by a slurry coating process

A simple, one-step slurry coating technique was used to aluminize open cell nickel metal foam at low temperature and short hold-down time. Three slurries of different composition, heat-treated at 650 °C for 2 h, were used to investigate the possibility of developing an aluminide coating on a commercially produced Ni foam. In all cases a dense, well-adhered to the Ni substrate aluminide coating of several μm thickness was produced. The thickness and aluminide phase and composition (NiAl and/or Ni₃Al) of the coating strongly depend on Al content and the mix of activators in the slurry.