Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

Processing lithium-ion battery (LIB) electrode dispersions with water as the solvent during primary drying offers many advantages over N-methylpyrrolidone (NMP). An in-depth analysis of the comparative drying costs of LIB electrodes is discussed for both NMP- and water-based dispersion processing in terms of battery pack $/kWh. Electrode coating manufacturing and capital equipment cost savings are compared for water vs. conventional NMP organic solvent processing. A major finding of this work is that the total electrode manufacturing costs, whether water- or NMP-based, contribute about 8–9% of the total pack cost. However, it was found that up to a 2?×?reduction in electrode processing (drying and solvent recovery) cost can be expected along with a $3–6?M savings in associated plant capital equipment (for a plant producing 100,000 10-kWh Plug-in Hybrid Electric Vehicle (PHEV) batteries) using water as the electrode solvent. This paper shows a different perspective in that the most important benefits of aqueous electrode processing actually revolve around capital equipment savings and environmental stewardship and not processing cost savings.     

Effect of ZnO layer thickness upon optoelectrical properties of NiO/ ZnO heterojunction prepared at room temperature

In this work, p-NiO/n-ZnO heterostructures were successfully prepared at room temperature using RF sputtering technique. The influence of ZnO layer thickness on the performance of the heterojunction was investigated. The deposited ZnO layers have a hexagonal Wurtzite structure with preferable growth orientations along (002) and (103) for thinner films. Increasing the thickness results in more crystallographic orientation randomness. The current–voltage measurements of the realized heterojunctions showed a clear rectifying behavior. The measured ideality factor varies from 2.5 to 1.6 according to the thickness of ZnO layer. The series resistance of the device is enlarged with increasing ZnO thickness. The deduced parameters from the I–V characteristics suggest that 200 nm is the optimal thickness of the ZnO layer according to our experimental conditions. We attribute the relatively better performance of this thickness to achieving reasonable compensation between serial resistance and ideality factor. The best heterojunction was tested and successfully used as a UV detector.     

Understanding the differences between how novice and experienced designers approach design tasks

Research was undertaken to understand how to provide the most appropriate support for novice designers in engineering design. However, how designers apply their experience and knowledge is not understood and further research in this area is required. This paper describes an observational study to understand how novice and experienced designers approach design tasks. Electronic Publication     

Effect of postoperative mydriatics on the iris

PURPOSE: To assess the role postoperative mydriatics play after extracapsular cataract extraction (ECCE) and posterior chamber intraocular lens (IOL) implantation in causing iris modifications and in controlling inflammation. SETTING: Outpatients Department, Ninewells Hospital, Dundee, Scotland. METHODS: The prospective study comprised 136 patients who had standardized ECCE. Half the patients used a mydriatic for 2 weeks postoperatively. Anterior chamber activity, pain, and eye redness were evaluated at 2 weeks postoperatively; pupil shape, peripheral anterior synechias, IOL position, and iris adhesions, at 6 weeks. RESULTS: Iris-lens adhesions were significantly more common in the group using a mydriatic. There was no difference between the two groups in postoperative inflammation. CONCLUSION: Mydriatics should not be used routinely after ECCE with posterior chamber IOL implantation.     

Stereoselectivity in cutaneous hydrolysis and transdermal transport of propranolol prodrug

This review is written to evaluate the stereoselectivity in cutaneous hydrolysis and transdermal transport of propranolol prodrug. This discussion will be useful in the development of knowledge about stereoselective cutaneous hydrolysis and its influence on stereoselective transdermal transport of many other chiral prodrugs and drugs. Propranolol prodrugs undergo stereoselective hydrolysis in hairless mouse skin homogenate and in excised skin samples during permeation; the stereoselectivity is markedly biased towards hydrolysis of the (R) isomer. Unlike the liver, the esterase activity of the skin is high in its cytosolic fraction. Most of the lipophilic propranolol prodrugs cause stereoselective permeation across hairless mouse skin. A mechanism of stereoselective permeation of propranolol prodrug across the skin has been proposed, which indicates that the stereoselectivity in permeation is resulted from the stereoselective hydrolysis of lipophilic prodrug during permeation.     

Biodegradation of chlorpyrifos by either single or combined cultures of some soilborne plant pathogenic fungi

Biodegradation of chlorpyrifos was studied in liquid culture media amended with either single or combined eight different plant pathogenic fungi isolated from the continuous cropping wheat fields. The average recovery of chlorpyrifos from the liquid media was found to be 86.1%. The detection limit of chlorpyrifos by the analytical method used was 19 ppb. Data showed that the growth of mixed fungi at concentrations up to 200 ppm of chlorpyrifos was higher than in the control treatment. Chlorpyrifos concentrations declined in the medium of combined fungi more than it did in the medium of any single fungus with increase in the incubation period. The amount of chlorpyrifos recovered was 79.8 ppm (39.9%) in the combined fungal cultures after 21 days. However, those recovered from the media of Fusarium graminearum, F. oxysporum, Rhizoctonia solani, Cladosporium cladosporiodes, Cephalosporium sp., Trichoderma viridi, Alternaria alternata, and Cladorrhinum brunnescens, ranged from 48.0 to 74.8%. The half-life value (T1/2) for chlorpyrifos was 15.8 day in the medium amended with mixed fungi. However, for the single cultures it ranged from 19.3 to 33.0 day.     

Reliability and scale effect in toughness of concrete structures

In the present work, the distribution of the random toughness characteristics (i.e. critical energy release rate, G_1c) has been evaluated on the basis of experimental observations. Fracture test results from three groups of geometrically similar concrete specimens of size (width×total depth×thickness), 420×420×50–1680×1680×200 mm³, made with different maximum aggregate size of 9.5, 19, 38, and 76 mm were analyzed using a recently proposed distribution of extremes. In applications of probability, it is important to use an appropriate distribution type and adequate techniques for estimating the parameters of distribution. In this study, a new type distribution of minima is employed for probability computations. It was noticed that the entropy of distribution increases with the crack length, i.e. the uncertainty of toughness, G_1c, value increases with crack length. A non-linear reduction of the maximum allowable splitting force with the defect size, a, was noticed. For large specimens, the maximum allowable splitting load is more sensitive to the required reliability level than that for small specimens. Reliability increases with aggregate size when all other conditions were constant.     

A new boundary finite element method for fluid–structure interaction problems

In order to study problems on fluid–structure interaction, we have used a mixed formulation which couples the classical functional of the structure with a new variational formulation by integral equations for the fluid. This formulation has the advantage over the finite element methods of avoiding the discretization of the fluid domain. Furthermore, unlike collocation methods, the explicit calculation of the Hadamard finite part of the singular integrals is avoided. This leads after discretization by boundary finite elements to a small and symmetrical algebraic system. Typical examples are presented that demonstrate the efficiency of this variational formulation by studying the sound transmission through a baffled plane structure and through a flexible panel backed by a rigid cavity. These include the calculation of the transmission loss factor and the determination of which modes dominate the noise transmission. Good agreement is obtained between numerical results and analytical results found in the literature.     

Low-loss three-phase frequency conversion using a TDM-PWM technique

A strategy for the realisation of a product-modulation frequency conversion technique is presented. For maximum efficiency and spectral purity, a pulse-width modulation (PWM) circuit is used. The addition of pulse-width-modulated signals from the three input phases to each of the three output phases is accomplished by time-division multiplexing (TDM). The need for the product modulator to accommodate multiplication by negative numbers is eliminated by a modification to the basic equations.