Formability of Ultrafine-Grained Interstitial-Free Steels

The stretch formability of ultrafine-grained (UFG) interstitial-free steel (IF-steel) produced by equal-channel angular extrusion/pressing (ECAE/P) via various strain paths was investigated with a miniaturized Erichsen test. A coarse-grained (CG) sample demonstrated high formability with an Erichsen index (EI) of 4.5 mm. Grain refinement by ECAE decreased the formability, but increased the required punch load (F _EI) depending on the applied strain paths. The EI values were 0.35, 2.90, and 3.91 mm for 8A-, 8Bc-, and 8C-processed samples, respectively. Decrease in the biaxial stretch formability was attributed to the limited strain-hardening capacity of the UFG microstructure. Also, the grain morphology of the UFG microstructure was found to be very influential on stretch formability. Heavily elongated grain morphology in the 8A-processed microstructure resulted in the lowest formability due to the increased cracking tendency through elongated grain boundaries. However, the UFG microstructures with equiaxed grains obtained after 8C and 8Bc ECAE resulted in better formability compared to 8A. The UFG microstructure reduced the roughness (orange peel effect) of the free surface of the biaxial stretched samples by decreasing the non-uniform grain flow leading to the so-called orange peel effect. It should be noted that the strength and ductility values gained from uniaxial tensile tests are not comparable directly to the EI and F _EI values determined from the Erichsen tests. Finally, it is important to emphasize that the UFG microstructure produced by a suitable strain path leading to equiaxed grains below 1 μm could be highly deformed even under multiaxial stress conditions.     

Concatenation of space‐time block codes and turbo trellis coded modulation (ST‐TTCM) over Rician fading channels with imperfect phase

In this paper, the performance of space time‐turbo trellis coded modulation (ST‐TTCM) is evaluated over Rician and Rayleigh fading channels with imperfect phase. We modify Baum–Welch (BW) algorithm to estimate the fading and phase jitter parameters for multi‐antenna configurations. Thus, we assume that the channel parameters change slower than carrier frequency. We know that, at high data rate transmissions over wireless fading channels, space–time block codes (STBC) provide the maximal possible diversity advantage. Here, the combined effects of the amplitude and the phase of the received signal are considered, each one modelled by Rician and Tikhonov distributions, respectively. We investigate space time‐turbo trellis coded modulation (ST‐TTCM) for 8‐PSK for several Rician factor K and phase distortion factor η. Thus, our results reflect the degradations both due to the effects of the fading on the amplitude and phase noise of the received signal while the channel parameters are estimated by BW algorithm. Copyright © 2004 John Wiley & Sons, Ltd.     

Out of Context: NMDA Receptor Antagonism in the Avian 'Prefrontal Cortex' Impairs Context Processing in a Conditional Discrimination Task.

Processing of context information is implicated in prefrontal functions as response selection or attention. N-methyl-D-aspartate (NMDA) receptors in the mammalian prefrontal cortex (PFC) and in the nidopallium caudolaterale (NCL) of birds, the avian functional equivalent of the PFC, are involved in learning, which also requires processing of context. The authors investigated the role of NMDA receptors in the pigeon (Columba livia) NCL for context processing and response selection in a simultaneous-matching-to-sample task with 2 trial types, requiring either processing of context information, delivered by a conditional stimulus (context dependent), or only recall of a stimulus-response association (fixed response). The competitive NMDA antagonist DL-2-amino-5-phosphonovaleric acid impaired performance only in context-dependent trials. Therefore, NMDA receptors in the avian PFC participate in response selection requiring context processing rather than in response selection per se. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evaluation of deflection amplification factor in steel moment‐resisting frames

Steel moment‐resisting frames (SMRFs) are the most common type of structural systems used in steel structures. The first step of structural design for SMRFs starts with the selection of the structural sections on the basis of story drift limitation. ASCE 7 (2010) requires that the inelastic story drifts be obtained by multiplying the deflections determined by elastic analysis under design earthquake forces with a deflection amplification factor (C_d). For special moment‐resisting frames, C_d is given as 5.5 in ASCE 7 (2010). Lower C_d values will increase the overall inelastic response of the structure. On the other hand, the inelastic response of the structure is expected to be less severe when designed for higher C_d values. The performance objective is that the structure should sustain the inelastic deformation demand imposed due to design earthquake ground motions. This study aims at investigating the inelastic seismic response that low‐rise, medium‐rise and high‐rise SMRFs can experience under design earthquake ground motions and maximum considered earthquake (MCE) level ground motions and evaluating the deflection amplification factors (C_d) for SMRFs in a rational way. For this purpose, nonlinear dynamic time history and pushover analyses will be carried out on SMRFs with 4, 9 and 20 stories. The results indicate that the current practice for computing the inelastic story drifts for SMRFs is rational and the frames designed complying with the current code requirements can sustain the inelastic deformations imposed during design earthquake ground motions when seismically designed and detailed. Copyright © 2013 John Wiley & Sons, Ltd.     

A review: Fibre metal laminates,background, bonding types and applied test methods

During the past decades, increasing demand in aircraft industry for high-performance, lightweight structures have stimulated a strong trend towards the development of refined models for fibre-metal laminates (FMLs). Fibre metal laminates are hybrid composite materials built up from interlacing layers of thin metals and fibre reinforced adhesives. The most commercially available fibre metal laminates (FMLs) are ARALL (Aramid Reinforced Aluminium Laminate), based on aramid fibres, GLARE (Glass Reinforced Aluminium Laminate), based on high strength glass fibres and CARALL (Carbon Reinforced Aluminium Laminate), based on carbon fibres. Taking advantage of the hybrid nature from their two key constituents: metals (mostly aluminium) and fibre-reinforced laminate, these composites offer several advantages such as better damage tolerance to fatigue crack growth and impact damage especially for aircraft applications. Metallic layers and fibre reinforced laminate can be bonded by classical techniques, i.e. mechanically and adhesively. Adhesively bonded fibre metal laminates have been shown to be far more fatigue resistant than equivalent mechanically bonded structures.     

Shape and size control of InAs/InP (113)B quantum dots by Sb deposition during the capping procedure

The role of Sb atoms present on the growth front during capping of InAs/InP (113)B quantum dots (QDs) is investigated by cross-sectional scanning tunnelling microscopy, atomic force microscopy, and photoluminescence spectroscopy. Direct capping of InAs QDs by InP results in partial disassembly of InAs QDs due to the As/P exchange occurring at the surface. However, when Sb atoms are supplied to the growth surface before InP capping layer overgrowth, the QDs preserve their uncapped shape, indicating that QD decomposition is suppressed. When GaAs(0.51)Sb(0.49) layers are deposited on the QDs, conformal growth is observed, despite the strain inhomogeneity existing at the growth front. This indicates that kinetics rather than the strain plays the major role during QD capping with Sb compounds. Thus Sb opens up a new way to control the shape of InAs QDs.     

Node pacing for small optical RAM-buffered packet-switching networks

One of the difficulties with optical packet switched (OPS) networks is buffering optical packets in the network. The only available solution that can currently be used for buffering in the optical domain is using long fiber lines called fiber delay lines (FDLs), which have severe limitations. Moreover, the research on optical RAM presently being done is not expected to achieve a large capacity soon. However, the burstiness of Internet traffic causes high packet drop rates and low utilization in very small buffered OPS networks. We therefore propose a new node-based pacing algorithm for decreasing burstiness. We show that by applying some simple pacing at the edge or core backbone nodes, the performance of very small optical RAM buffered core OPS networks with variable-length packets can be notably increased.     

Effect of Seeding on Phase Development, Densification Behavior, and Microstmcture Evolution in Mullite Fabricated from Microcomposite Particles

An investigation was carried out concerning the effect of mullite seed particles on phase development, densification behavior, and microstructure evolution in powder compacts prepared with silica/alumina microcomposite particles. The incorporation of ∼2 wt% seed particles in the microcomposite powder compacts had relatively little effect on densification, but resulted in significant decreases in the temperature for mullite formation and the grain sizes in mullitized samples. Samples could be sintered to almost full density and subsequently converted to mullite with average grain sizes ≤0.4 μm at temperatures in the range of 1300°-1400°C. The available evidence indicated that mullite formation occurred primarily by nucleaton and growth in the siliceous matrix phase.     

Determination of ofloxacin in human aqueous humour by high-performance liquid chromatography with fluorescence detection

This unusual pathology has not been described in the medical literature of the last ten years. A 39-year-old patient, affected by unilateral cryptorchidism, on the right side, and congenital inguinal hernia, reached the operating theatre suffering from occlusive intestinal syndrome, due to a clogged hernial sac. This clog was caused by a retracting testicle which in turn stopped the ileal ansa from slipping back in to the peritoneum. Through this case we can underline the excursus of such pathology, which isn't very frequent in the adult but can, nevertheless create a fairly serious pathology, often leading to neoplan.     

Power Doppler findings in nasopharingeal angiofibroma

Three fractions of polysaccharides that have high biological activity were extracted from Chinese bamboo leaves (Indocalamus Tesselatus) with 0.9% sodium chloride, 1% ammonium oxalate and 85% ethanol. Their component sugars were investigated by paper chromatography developed with n-butanol-pyridine-water (6:4:3 by vol), and by gas chromatography with crown ester stationary-phase-fused silica capillary column. Their monosaccharide compositions are different from each other with glucuronic acid, galactose, arabinose, mannose, glucose, and xylose (52, 18, 9, 7 and 6%, respectively) in one fraction, only glucuronic acid in another and glucuronic acid, fucose, arabinose and xylose (36, 31, 24 and 9%, respectively) in the third fraction. The protection effect of two polysaccharides against experimental hepatitis was studied in mice.