On the use of personality measures in personnel selection.

Discusses the use of personality as a predictor in personnel selection. Recent data has suggested that personality measures (PRMs) are related to performance criteria that are unrelated to cognitive ability when the traits measured are conceptually related to these criteria. It seems that PRMs may predict job performance dimensions that cannot be predicted by cognitive ability measures. The use of PRMs in personnel selection may be warranted when a careful job analysis is undertaken to determine which performance dimensions may be related to personality traits. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Polymerase chain reaction versus culture for detection of Ureaplasma urealyticum and Mycoplasma hominis in the urogenital tract of adults and the respiratory tract of newborns

The efficiency of the polymerase chain reaction (PCR) was compared with that of culture for detection of Ureaplasma urealyticum and Mycoplasma hominis in 726 clinical specimens comprising 189 gynecological samples, 362 urological samples, and 175 samples from newborn infants. The sensitivity of PCR versus culture was 95% for both organisms, while the sensitivity of culture versus PCR was 91% for Ureaplasma urealyticum and 84% for Mycoplasma hominis. Furthermore, PCR tests were faster than culture tests, allowing the time to diagnosis to be reduced from two to five days to 24 h.     

Simulation of leachate migration in leaky aquifers

A two-dimensional cross-section finite difference model is presented to simulate density dependent leachate migration in leaky aquifers. Unlike existing models, a new approach is adopted to couple the groundwater-flow equation and the hydrodynamic dispersion equation with the elimination of the intermediate step of calculating velocities. The concept of the reference density is employed, permitting increased accuracy (over pressure-based models) in the representation of the transport process. The model is then used to study the effect of several hydraulic and transport parameters on the flow pattern and plume migration which are found to be very sensitive to most of these parameters. Equiconcentration and equipotential lines are overlapped to provide a better understanding of the coupling effect.     

Effect of titanium substitution on the structure and properties of Fe3Al-based intermetallic alloys

Substitutions (0–16 at%) of titanium for iron in Fe₃Al-based alloys rapidly solidified by chill-block melt-spinning stabilize the D0₃ and B2 ordered structures. Rapid solidification results in total suppression of D0₃ order in binary alloys, whereas alloys containing titanium have D0₃ structure. D0₃ and B2 antiphase domain size, lattice parameter and hardness increase with increasing titanium content of the alloy. The deformation mode changes from single (unit) bcc dislocation in binary alloys to two-fold superdislocation configuration in D0₃Fe₃Al-Ti alloys. Mechanical antiphase boundaries are generated by the movement of these imperfect configurations. All the alloys exhibited cleavage tensile failure. The mechanical properties are correlated with the observed structural changes.     

Growth structure investigation of MgF2 and NdF3 films grown by molecular beam deposition on CaF2(111) substrates

The growth structure of MgF₂ and NdF₃ films grown on polished CaF₂(111) substrates deposited by molecular beam deposition has been investigated using transmission electron microscopy (TEM) of microfractographical and surface replications as well as cross-sectional TEM, atomic force microscopy, packing density, and absorption measurements. It has been shown that by taking advantage of ultrahigh vacuum environments and a special stratification property of MgF₂ and NdF₃ films, the preparation of nanocrystalline films of high packing density and low optical absorption is possible at a substrate temperature of 425 K.     

Silicon carbide-toughened zirconia ceramics

Tetragonal zirconia polycrystalline (TZP) ceramics containing SiC reinforcement in the form of fine particles (nano-scale), particles (micro-scale), whiskers and platelets were synthesized by hot-pressing. The effects of morphology and grain size of SiC reinforcement on the strength and fracture toughness at room temperature were investigated. The addition of SiC (in whatever form) caused decreases in strength and toughness at room temperature with the exception of whisker-reinforced materials. Toughness fell off with increasing temperature, but nevertheless retained about one-half of the room-temperature value for that particular SiC reinforcement. However, the whisker- and particle-reinforced materials had higher K _lc values at high temperature than fine particle- or platelet-reinforced materials, with values in excess of 7 MPa m^1/2 at 1000 °C. The microstructure was examined for SiC whisker-reinforced/TZP materials by TEM and HREM, to examine the nature of the whisker/zirconia interface.     

Measurement of the tunnel rate in SIS' tunnel junctions as function of bias voltage

Cryogenic detectors with superconducting tunnel junctions can provide an energy resolution improved by at least one order of magnitude compared with standard semiconductor detectors. While the detection principle was already demonstrated many years ago, the past years were dedicated to the transition from the laboratory sample to practical detectors. Our most favored detector design gives rise to tunnel junctions with electrodes of unequal energy gaps. In such hetero tunnel junctions bias conditions can be established which cause a negative signal current. We report the experimental verification of this effect, and we discuss the yield of charge signal of cryogenic detectors based upon superconducting tunnel junctions.     

Performance evaluation of the Golay code pulse compression technique

The Center for NDE, Iowa State University, has developed a laboratory prototype Golay code pulse compression system and tested it on a variety of materials. The performance of the system was evaluated in terms of signal-to-noise ratio enhancement (SNRE), resolution, and computation speed. The system's error sources also were discussed. The Golay code pulse compression was simulated on a computer and demonstrated the effective noise suppression. In addition, an equivalent pulse of the Golay code (delta-like pulse) was derived theoretically using a simple ultrasonic inspection model, which demonstrated its equivalence on the output correlated signal. Overall, the pulse compression technique extended the detection range for a given peak power and considerably reduced the system'swhite noise, hence providing enhanced signal-to-noise ratios (SNRs). An average of 30 dB improvement in SNR was obtained from highly energy-absorbent materials such as rubber, plastics, corks (insulation materials), and thick composites using the Golay codes of up to 512 bits. However, the technique did not effectively reduce coherent scattering noises from the coarse grain boundaries in cast stainless steels, Inconel weld metal, and material lay-ups in thin composites. Furthermore, it was found that, depending upon the system's hardware capabilities, the overall performance could be degraded considerably.