Probabilistic Wind Farms Generation Model for Reliability Studies Applied to Brazilian Sites

This paper presents a computer model for the probabilistic representation of wind farms generation for reliability studies, which can provide an annual estimation of energy production and calculate several performance indexes. The model combines the stochastic characteristics of wind speed with the operational information of the turbines, such as the failure and repair rates, representing the wind farm by a Markov process. The simulations are made with real time series of wind speed of several Brazilian regions and actual turbine models. The influence of some wind farm and installation site characteristics on the results are evaluated, such as the wind speed statistical clustering technique, the number and type of the turbines, and the failure and repair rates. The results obtained reproduce successfully the behavior of the components considered in the model     

Allocation of fixed costs in distribution networks with distributed generation

In this paper, we propose a method for the allocation of fixed (capital and nonvariable operation and maintenance) costs at the medium voltage (MV) distribution level. The method is derived from the philosophy behind the widely used MW-mile methodology for transmission networks that bases fixed cost allocations on the "extent of use" that is derived from load flows. We calculate the "extent of use" by multiplying the total consumption or generation at a busbar by the marginal current variations, or power to current distribution factors (PIDFs) that an increment of active and reactive power consumed, or generated in the case of distributed generation, at each busbar, produces in each circuit. These PIDFs are analogous to power transfer distribution factors (PTDFs). Unlike traditional tariff designs that average fixed costs on a per kWh basis across all customers, the proposed method provides more cost-reflective price signals and helps eliminate possible cross-subsidies that deter profitable (in the case of competition) or cost-effective (in the case of a fully regulated industry) deployment of DG by directly accounting for use and location in the allocation of fixed costs. An application of this method for a rural radial distribution network is presented.     

Software architecture-centric methods and agile development

The agile software development paradigm and plan-driven approaches each have their strengths and shortcomings. The former emphasizes rapid, flexible development, while the latter emphasizes project and process infrastructure. Many practitioners, particularly of agile methods, tend-to view software architecture in light of the plan-driven side of the spectrum. They think that architecture-centric methods are too much work, equating them with high-ceremony processes emphasizing document production. But many elements make up a successful development approach, including process, product, technology, people, and tools. Software architecture is part of product quality and isn't tied to a particular process, technology, culture, or tool. This article explores the relationship and synergies between architecture-centric design and analysis methods and the extreme programming framework. We chose to focus on XP because it's one of the most mature and best-known agile practices.     

Long-term testing and applications of high-stress MV EPR cables

High-stress design 35-kV ethylene propylene rubber (EPR)-insulated cables with 1.14-mm (45-mil) wall reduction have been in service for more than ten years. In the mid 1990s, an extensive cable testing program was initiated to demonstrate that high-stress designs up to 4 kV/mm (101.6 V/mil) exhibit a significant electrical and mechanical safety margin to operate on typical utility network systems. Investigations were also undertaken to demonstrate the suitability of accessories for high-stress designs. This paper will present the results of six-year, long-term wet electrical testing conducted to demonstrate that with proper design, the aging performance of standard wall and high-stress design cables provide satisfactory results and suitable performance for the intended application. Additionally, utility field experience is presented on 35- and 15-kV cables operating at high stress. The experience for these 15-kV medium-voltage EPR cable designs employ the highest recommended stress for cables of this class, as well as taking into account the complete system performance.     

The beneficial effects of storage on the quality of wastewater for irrigation: a case study in Sicily.

Although the main function of reservoirs in agriculture is to allow the storage and temporal shifting of large volumes of waters, further benefits emerge from their application in wastewater reuse systems. In fact, as observed in several other studies carried out on such complex natural systems, the storage period, under proper conditions, can lead to a significant improvement of the water quality for irrigation thanks to concurrent physical, chemical and biological processes. In order to investigate the reservoir dynamics, an experimental research was carried out in a farm reservoir (volume of 11,000 m3, maximum depth of 6.3 m and mean depth of about 5 m), receiving treated wastewater and subject to scheduled highly variable input to volume ratios, in order to observe the broadest range of behaviour responses. Specifically, over a monitoring period lasted 4 months, the reservoir was operated as a standard batch reactor in the first and third phases and as a continuous flow reactor in the second one. Based on correlation analysis between the chemical, physical and biological water parameters and operational ones, a new operative index is proposed which integrates the morphological characteristics of the tank and the management ones, and shows a significant correlation with the qualitative characteristics of the stored water.     

Stoichiometric dye-binding procedure for the determination of the reactive lysine content of soya bean protein

A new analytical method has been developed for the determination of the reactive lysine content of soya bean protein. The method is based on the reaction of the free basic groups of the protein with 1-phenylazo-2 naphthol-6,8 disulphonic acid. With regard to the stoichiometry of the procedure, it has been proved, contrary to earlier reports, that the basic amino acids, histidine, arginine and lysine, each combine with one mole of the dye. After acylation with propionic anhydride lysine alone loses its dye reactivity. The usefulness of the proposed method has been demonstrated by the determination of the reactive lysine content of several untreated, heat-treated and acid-treated soya bean samples. The results show that heat damage of about 5% in reactive lysine content can be measured in 1·5 h with good reproducibility.