Investigations of delamination criticality and the transferability of growth criteria

This article describes a study of delamination growth along 0 °/0 °, 0 °/ 5 °, ± 5 °, and 0 °/90 ° interfaces sandwiched between unidirectional carbon fibre/epoxy composite material. Relationships between damage criticality, growth rate and acoustic emission activity for delamination growth have been studied and the transferability of results from laboratory coupons to composite structural elements has been examined. Two types of coupon tests, conventional delamination beams and rigidly loaded single edge notched strips, have been compared for different mode ratios. Comparative tests have been made on buckling-induced delamination in plates. A graphite crack gauge has been used to measure delamination length and growth rate, ranging from 0.05–2000 m/s. Damage growth was also followed using visual, ultrasonic C-scan, X-ray radiography, macro-video and acoustic emission measurements. Empirical evaluations of interlaminar toughness for delamination beams are made using the Irwin-Kies relation. Unstable growth is analysed using elasto-dynamic moving finite elements. Bucklinginduced delamination is analysed using plate/shell FE methods with growth/remeshing algorithms.     

A behavioral approach to linear exact modeling

The behavioral approach to system theory provides a parameter-free framework for the study of the general problem of linear exact modeling and recursive modeling. The authors present the solution of the (continuous-time) polynomial-exponential time series modeling problem. Both recursive and nonrecursive solutions are provided and classified according to properties like complexity and controllability. It is shown, in particular, that recursive modeling corresponds to updating by means of a cascade inter-connection of systems. As a special case, the solution of several other problems, such as rational interpolation, realization, and modeling of arbitrary discrete-time time series, is obtained     

Nitric oxide reduction and carbon monoxide oxidation over carbon-supported copper-chromium catalysts

Carbon supported copper-chromium catalysts are shown to be very active for both the reduction of nitric oxide with carbon monoxide and the oxidation of carbon monoxide with oxygen. Mixed copper-chromium oxide active phases have good activity in the simultaneous removal of nitric oxide and carbon monoxide from exhaust gases. The influence of several catalyst variables has been investigated. The activity per volume of catalyst increases with increasing loading, while the intrinsic activity shows a maximum around C/M=100−50. An optimum catalyst for nitric oxide reduction and carbon monoxide oxidation has a copper/chromium ratio of 2/1. The apparent activation energy for the carbon monoxide oxidation over carbon supported copper-chromium catalysts is 77 kJ/mol, suggesting that the Cu---O bond rupture is the rate-limiting process. The reduction of nitric oxide takes place at higher temperatures. Since all catalysts have a low selectivity for molecular nitrogen formation at lower temperatures, the dissociation of nitric oxide is probably rate determining, resulting in a slightly reduced catalyst system. In an excess of carbon monoxide the reaction is first-order in nitric oxide and zero-order in carbon monoxide. Moisture inhibits the reaction by reversible competitive adsorption, whereas carbon dioxide does not. Oxygen completely inhibits the reduction of nitric oxide due to the more rapid reoxidation of the catalytic sites compared to nitric oxide. Therefore, the reduction of nitric oxide takes place only when all oxygen has been converted and, hence, is shifted to higher temperatures. As a possible consequence, the production of nitrous oxide is reduced. Nitric oxide and molecular oxygen react preferentially with carbon monoxide, so, in an excess of oxidizing component, gasification of the carbon support occurs at higher temperatures after carbon monoxide has been completely consumed.     

Afterburner [network-independent card for protocols]

Many current implementations of protocols such as the Transmission Control Protocol/Internet Protocol (TCP/IP) are inefficient because data are often accessed more frequently than necessary. Three techniques that reduce the need for memory bandwidth are proposed. The techniques are copy-on-write, page remapping, and single-copy. Afterburner, a network-independent card that provides the services that are necessary for a single-copy protocol stack, is described. The card has 1 MByte of local buffers and provides a simple interface to a variety of network link adapters, including HIPPI and asynchronous transfer mode (ATM). Afterburner can support transfers to and from the link adapter card at rates up to 1 Gbit/s. An implementation of TCP/IP that uses the features provided by Afterburner to reduce the movement of data to a single copy is discussed. Measurements of the end-to-end performance of Afterburner and the single-copy implementation of TCP/IP are presented     

Cervical lymph nodes metastases from a pituitary carcinoma

Ipratropium bromide is a synthetic derivative of atropine with little absorption when used in inhalation, and therefore little secondary effects. The authors review its pharmacological properties and therapeutic efficacy in the treatment of asthma in children. Combined nebulized inhalation of ipratropium bromide and beta 2 sympathomimetic results in a more efficient and more sustained bronchodilatation than beta 2 sympathicomimetic alone in the treatment of acute asthma in children. Ipratropium bromide should be usefully introduced in the therapeutic scheme of acute asthma in children. Further studies will be necessary in order to determine its efficacy and tolerance in infants.     

Technology combats disabilities

The author focusses on advances in equipment that offset physically functional limitations. He discusses how disabled and elderly people are using aids that enhance mobility (walking a certain distance, lifting a weight, or climbing stairs) as well as sensory faculties (seeing print, hearing conversation, and speaking intelligibly)     

Fractal error for detecting man-made features in aerial images

A technique is proposed for aiding photointerpreters in detecting man-made features in aerial reconnaissance images. The technique, which uses a metric called fractal error, is based on the observed propensity of natural image features to fit a fractional Brownian motion model. Man-made features usually do not fit this model well, and consequently the fractal error metric may be used as a discriminant function for detecting man-made scene features