国内BOPP膜生产现状

介绍了国内BOPP薄膜和专用料的生产情况，并提出了建议。     

Morphology and properties of blends of polypropylene with ethylene-propylene rubber

Great attention has been paid to the toughening of isotactic polypropylene (PP) in recent years in order to make full use of this plastic. This paper presents the results of our study on the compatibility of PP with ethylene-propylene-diene rubber (EPT), polybutadiene rubber (PB) or styrene-butadiene rubber (SBR) through characterization of the blends' morphology, and on. the morphology and properties of binary blends of PP with EPT (EPT/PP) and ternary blends of PP, EPT, and polyethylene (PE) (EPT/PE/PP). Morphological structure of solution blends and the great improvement in low-temperature impact strength and other properties of the mechanical blends have shown the difference among EPT, PB, and SBR in compatibility with PP, the effectiveness of using EPT as PP's toughening agent, and the effect of EPT on EPT/PP blend as both toughening agent and compatibilizer. Addition of EPT to EPT/PP made interesting changes in morphology but no effect on properties was observed.     

C207甲醇合成铜基催化剂本征失活动力学

一、前言工业生产中广泛使用的甲醇合成铜基催化剂具有活性高、选择性好、起始活性温度低等优点。但铜基催化剂抗毒性能差,影响了它的使用寿命。铜基催化剂的主要毒物是原料气中所含的 H_2S。铜基催化剂 H_2S 中毒失活研究,国内未见报道,美国的 Wood 等和 Rdvodic 等作过一些研究。本文通过对国产 C207铜基催化剂硫化氢中毒失活动力学的研究,建立描述活性衰退过程的失活动力学方程,得到活性与硫化     

普钙产品转化率的数值计算方法

对影响普钙产品转化率的各种因素进行了分析,利用MATLAB 软件包得到了转化率的计算公式,提出了确定未分解磷矿的比例和由倍半氧化物引起的有效磷退化幅度的方法,为生产系统的预测和调整提供了一种途径。     

MACROPROCESS OF PARTICLE FORMATION IN SUSPENSION POLYMERIZATION OF STYRENE WITH INORGANIC STABILIZER SYSTEM

The macroprocess of particle formation from suspension droplets of styrene in a pdymerizationsystem was investigated.Inorganic hydroxyapatite or its mixture with polyvinyl alcohol as thepolymerization system was used.Those items such as the effects of the Weight fraction of dispersed-phase,the amount of the inorganic stabilizer and the agitation speed on the breakup and coalescence of thetransient dispersed drops etc.Were examined.Results showd that the dynamic behavior of the transi-ent polymer droplets changed in the presence of the suspension stabilizer during the reaction.     

实时数据仓库中一种改进的数据流更新算法

为实现数据仓库中数据的高效集成,针对数据偏斜分布现象,提出一种改进的数据流更新算法EH-JOIN。该算法对传统散列连接方法进行改进,利用索引将部分频繁使用的主数据存储在内存中,解决了高速数据流下的磁盘频繁访问问题。实验结果表明,与MESHJOIN算法和R-MESHJOIN算法相比,EH-JOIN算法的服务速率在磁盘存储关系集保持适当大小时分别提高了96%和81%,在内存大小不同时提高了57%和48%。     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

基于TCN的地铁列车控制方案的研究

本文针对地铁车厢内控制设备分散的问题,设计了基于TCNRTP的地铁列车控制网络系统。采用NS2网络模拟软件构建的虚拟网络环境,编写消息数据传输层协议,通过测试列控网络的通信效率,得出了影响通信效率的因素;通过配置列控通信设备的基本功能和设定装置运行参数达到配置网络化通信的目的。     

策应鄱阳湖生态经济区建设 推动吉安进位赶超绿色崛起

建设鄱阳湖生态经济区是国家从战略全局和长远发展出发作出的一项重大决策。如何主动策应鄱阳湖生态经济区建设,推动吉安进位赶超、跨越发展,是摆在我们各级政府和科技部门面前一项亟待解决的问题。为此,一是要提高认识,统一思想,切实增强策应规划的使命感和责任感;二是要结合实际,突出重点,全面对接鄱阳湖生态经济区规划;三是要加强领导,落实措施,确保吉安进位赶超、绿色崛起取得明显成效。     

Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material

A new type of high temperature energy storage material was obtained through the melt infiltration method, using compounding SiC ceramic foam as matrix and Na₂SO₄ as phase change material. The resulting composite material was measured by XRD, SEM, TG-DSC methods. The experimental results indicate that the composite is composed of silicon carbide, sodium sulfate and square quartz, and no chemical reactions occurs between Na₂SO₄ and SiC matrix. Na₂SO₄ has a good bonding with the SiC ceramic foam matrix. As the composite material is characterized by high thermal energy storage density and high thermal conductivity, it is suit for energy storage under high temperature. Funded by the “863” Hi-Tech Research and Development Program of China (2008AA05Z418)