Activated carbons as potentially useful non-nutritive additives to prevent the effect of fumonisin B1 on sodium bentonite activity against chronic aflatoxicosis

Aflatoxin B₁ (AFB₁) and fumonisin B₁ (FB₁) are mycotoxins that often co-occur in feedstuffs. The ingestion of AFB₁ causes aflatoxicosis in humans and animals. Sodium bentonite (NaB), a cheap non-nutritive unselective sequestering agent incorporated in animal diets, can effectively prevent aflatoxicosis. Fumonisins are responsible for equine leukoencephalomalacia and porcine pulmonary oedema, and often have subclinical toxic effects in poultries. Fumonisin B₁ and aflatoxin B₁ are both strongly adsorbed in vitro on sodium bentonite. Co-adsorption studies, carried out with a weight ratio of FB₁ to AFB₁ that mimics the natural occurrence (200:1), showed that FB₁ greatly decreases the in vitro ability of NaB to adsorb AFB₁. The ability of two activated carbons to adsorb FB₁ was also investigated. Both carbons showed high affinity for FB₁. A complex behaviour of the FB₁ adsorption isotherms with pH was observed. In vitro results suggest that under natural contamination levels of AFB₁ and FB₁, a mixture of activated carbon and sodium bentonite might be potentially useful for prevention of sub-acute aflatoxicosis.     

Simulation of retronasal aroma of white and red wine in a model mouth system. Investigating the influence of saliva on volatile compound concentrations

The influence of saliva on aroma release from white and red wines was studied in a model mouth system. Aroma compounds were analysed in the dynamic headspace of wines by solid phase micro extraction/gas chromatography with flame ionization detection. Volatile compounds were identified by solid phase micro extraction/gas chromatography-mass spectrometry, resulting in a total of 43 compounds in white wine and 41 in red wine. The results showed a greater influence of saliva on aroma release in white wine than red wine. In white wine treated with human saliva, esters and fusel alcohols, responsible for fruity and fusel oil odours, were reduced of 32–80%; by contrast, the concentration of 2-phenylethanol and furfural, responsible for rose and toasted almond notes, increased by 27% and by 155%, respectively. In red wine, treated with human saliva, only a few esters decrease, with a reduction of 22–51% due to protein-binding ability of polyphenols that are able to inhibit the activity of the saliva. C-13 norisoprenoids, vitispirane (eucalyptol) and TDN (kerosene), decreased both in white and red wine, showing a comparable variation while, for β-damascenone, the variation was insignificant.     

A fan‐equipped reactor for dust explosion tests

A Computational Fluid Dynamics (CFD) model was developed with the aim at simulating the turbulent flow field and associated dust dispersion in an agitated spherical explosion vessel. Simulations were performed in the presence of two counter‐rotating fans and also after having switched‐off the fans. Numerical results have shown that the dust mainly accumulates at the center of the sphere in the space left by the four vortices formed. After the switch‐off of the fans, the dust particles start filling the empty volumes inside the sphere, reaching a quite uniform distribution (with concentration equal to the nominal value) and simultaneously ensuring a controlled value of turbulent kinetic energy. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1572–1580, 2015     

Toward Demystifying the Mohs Hardness Scale

Today, the Mohs scale is used profusely throughout educational systems without any persuasive understanding of the fundamental principles. Why one mineral has a scratch hardness over the next culminating in a scale of 1 (chalk) to 10 (diamond) has no atomistic or structure‐sensitive basis that explains this outcome. With modern computationally based atomistic and multiscale models, there is increasing promise of defining the pressure and rate‐dependent parameters that will allow a fundamental understanding of the Mohs scale. This study principally addresses the combined fracture and plasticity parameters that qualitatively affect fracture at the nanoscale. A physical model wherein the crack tip under a scratch is shielded by dislocations is supported by molecular dynamics (MD) simulations in both ductile aluminum and brittle silicon carbide. Next, this model is applied to nanoindentation data from the literature to produce a ranking of Mohs minerals based on their fundamental properties. As such, what is presented here is a first step to address the flow and fracture parameters ultimately required to provide a figure of merit for scratch hardness and thus the Mohs scale.     

Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB<Subscript>2</Subscript> Composites Produced by Direct Metal Laser Sintering (DMLS)

Direct metal laser sintering (DMLS) is an additive manufacturing technique for the production of parts with complex geometry and it is especially appropriate for structural applications in aircraft and automotive industries. Aluminum-based metal matrix composites (MMCs) are promising materials for these applications because they are lightweight, ductile, and have a good strength-to-weight ratio This paper presents an investigation of microstructure, hardness, and tribological properties of AlSi10Mg alloy and AlSi10Mg alloy/TiB₂ composites prepared by DMLS. MMCs were realized with two different compositions: 10% wt. of microsize TiB₂, 1% wt. of nanosize TiB₂. Wear tests were performed using a pin-on-disk apparatus on the prepared samples. Performances of AlSi10Mg samples manufactured by DMLS were also compared with the results obtained on AlSi10Mg alloy samples made by casting. It was found that the composites displayed a lower coefficient of friction (COF), but in the case of microsize TiB₂ reinforcement the wear rate was higher than with nanosize reinforcements and aluminum alloy without reinforcement. AlSi10Mg obtained by DMLS showed a higher COF than AlSi10Mg obtained by casting, but the wear rate was higher in the latter case.     

Co-Expression and Co-Localization of Cartilage Glycoproteins CHI3L1 and Lubricin in Osteoarthritic Cartilage: Morphological,Immunohistochemical and Gene Expression Profiles

Osteoarthritis is the most common human arthritis characterized by degeneration of articular cartilage. Several studies reported that levels of human cartilage glycoprotein chitinase 3-like-1 (CHI3L1) are known as a potential marker for the activation of chondrocytes and the progression of Osteoarthritis (OA), whereas lubricin appears to be chondroprotective. The aim of this study was to investigate the co-expression and co-localization of CHI3L1 and lubricin in normal and osteoarthritic rat articular cartilage to correlate their modified expression to a specific grade of OA. Samples of normal and osteoarthritic rat articular cartilage were analyzed by the Kellgren–Lawrence OA severity scores, the Kraus’ modified Mankin score and the Histopathology Osteoarthritis Research Society International (OARSI) system for histomorphometric evaluations, and through CHI3L1 and lubricin gene expression, immunohistochemistry and double immuno-staining analysis. The immunoexpression and the mRNA levels of lubricin increased in normal cartilage and decreased in OA cartilage (normal vs. OA, p < 0.01). By contrast, the immunoexpression and the mRNA levels of CHI3L1 increased in OA cartilage and decreased in normal cartilage (normal vs. OA, p < 0.01). Our findings are consistent with reports suggesting that these two glycoproteins are functionally associated with the development of OA and in particular with grade 2/3 of OA, suggesting that in the future they could be helpful to stage the severity and progression of the disease.     

The interpretation of the English landscape garden between 1815 and 1840 through Xavier Kurten’s work in Piedmont (north-west Italy)

Xavier Kurten (?–1840) was a Prussian landscape gardener who worked for the Savoy family in the Piedmont region of Italy in the first half of the nineteenth century. He designed or redesigned all royal parks, creating a specific style based on the English naturalistic garden approach. This research was performed with the aim of investigating the development of the English landscape garden in Italy. Historical documents relating to Kurten’s biography and his work in Piedmont, including plans, were collected and analysed. We analyse and discuss the features that characterised his work: the relationship between the landscape—garden—house, the path system, the use of water, the vegetation, and the garden as a productive landscape. Kurten’s style is compared with the projects of William Kent and Lancelot ‘Capability’ Brown.     

Pectins from Aloe Vera: Extraction and production of gels for regenerative medicine

Extraction, purification, and gel preparation of Aloe Vera pectin and the evaluation of the biocompatibility of the pectin gels were studied, considering as end use as implantable materials for regenerative medicine. A. Vera was chosen as source of pectin, as this pectin was described to possess high molecular weight and a low degree of esterification. As the properties of pectins are strictly dependent upon the extraction methods in combination with the natural source, the extraction method was modified in order to optimize the yield of the final product, its purity, the duration of the process and the selection of non‐toxic chemical reagents. Changing the experimental conditions resulted in four different extraction processes and products with different physical and chemical characteristics. The optimal extraction resulted to be the process: with enzimatic deactivation by microwave and the use of sodium citrate as chelating agent the molecular weight of the pectin extracted was estimated to be 118 kDa and the 2.93% esterification degree. Cytocompatibility of pectin gels, prepared by ionotropic gelation, showing an improved cell adhesion if compared to commercial pectin. The results suggest that the extracted A. Vera pectins possess interesting properties to be exploited for the production of mechanically stable gels by ionotropic gelation and high rhamnose content matrices for application in regenerative medicine. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39760.     

Senescent CD4+CD28− T Lymphocytes as a Potential Driver of Th17/Treg Imbalance and Alveolar Bone Resorption during Periodontitis

Senescent cells express a senescence-associated secretory phenotype (SASP) with a pro-inflammatory bias, which contributes to the chronicity of inflammation. During chronic inflammatory diseases, infiltrating CD4⁺ T lymphocytes can undergo cellular senescence and arrest the surface expression of CD28, have a response biased towards T-helper type-17 (Th17) of immunity, and show a remarkable ability to induce osteoclastogenesis. As a cellular counterpart, T regulatory lymphocytes (Tregs) can also undergo cellular senescence, and CD28⁻ Tregs are able to express an SASP secretome, thus severely altering their immunosuppressive capacities. During periodontitis, the persistent microbial challenge and chronic inflammation favor the induction of cellular senescence. Therefore, senescence of Th17 and Treg lymphocytes could contribute to Th17/Treg imbalance and favor the tooth-supporting alveolar bone loss characteristic of the disease. In the present review, we describe the concept of cellular senescence; particularly, the one produced during chronic inflammation and persistent microbial antigen challenge. In addition, we detail the different markers used to identify senescent cells, proposing those specific to senescent T lymphocytes that can be used for periodontal research purposes. Finally, we discuss the existing literature that allows us to suggest the potential pathogenic role of senescent CD4⁺CD28⁻ T lymphocytes in periodontitis.     

Characterization of polyacrylamides used in enhanced oil recovery

Polyacrylamides can be readily characterized using techniques such as IR spectroscopy, ¹³C-NMR, elementary analysis, TGA, and x-ray diffraction. The first three techniques can also be used quantitatively to measure the degree of hydrolysis of the polymers, without the need to know accurately the weight of the sample. The presence of inorganic salts, such as Na₂SO₄, Na₄(CO₃)SO₄, and Na₂CO₃, is readily detected via IR or wide-angle x-ray diffraction. No evidence of crystallinity is found in the samples studied.