Tensile and Fracture Properties of Aluminium Alloy AA2219-T87 Friction Stir Weld Joints for Aerospace Applications

Metallurgical and Materials Transactions A - The purpose of the present work is to study the mechanical behaviour of AA2219-T87 friction stir weld (FSW) joints at different temperatures (Room...     

Water Content Determinations for Peat and Other Organic Soils Using the Oven-Drying Method

There has been much debate in the literature over the past 60 years regarding an appropriate oven-drying temperature for water content determinations in peat and other organic soils. For inorganic soils, the water content is usually based on the equilibrium dry mass corresponding to drying temperatures in the range 100–110°C. However, for peat and other organic soils, several researchers have recommended lower drying temperatures in the range 60–90°C in an attempt to prevent possible charring, oxidation, and/or vaporization of substances other than pore water. However, all of the relevant water is not fully evaporated at too low a temperature, and because specimen dry mass is a function of drying temperature, the resulting water content values are lower than those determined for the temperature range 100–110°C. Experimental data reported in this article show that oven drying of peat and other organic soils at 100–110°C using either gravity–convection or forced-draft ovens is acceptable for routine water content determinations. Because a standardized oven temperature is desirable when correlating water content with other material properties, it is recommended that oven drying of peat and other organic soils be performed over temperature ranges of either 105–110°C or 105 ± 5°C, in line with standardized ranges for inorganic soils.     

Yield and Quality Characteristics of Rendered Chicken Oil for Biodiesel Production

Whole dead poultry birds obtained from commercial layer farms were assessed for fat in the whole carcass and then dry rendered in three different rendering regimens T₁, T₂ and T₃ (temperature = 120, 130 and 140 °C and shell pressure = 1, 2 and 3 kg/cm² respectively) and the effect on the yield and quality of the rendered chicken oil were studied. The overall fat percentage of the whole dead poultry carcass was 14.55 ± 0.17 % and the fat content of ‘greaves’ was 14.49 ± 0.38 %. In the dry batch rendering trials, the mean overall fat recovery was 24.46 ± 1.19, 26.78 ± 3.14 and 22.42 ± 2.32 % and the overall fat yield was 3.52 ± 1.72, 3.84 ± 0.44 and 3.22 ± 0.33 % of the carcass weight in T₁, T₂ and T₃ respectively. Solvent extraction of fat could recover 96.10 ± 0.14 % of fat from ‘greaves’ which was significantly higher than the mechanical centrifugation method. Among the quality characteristics of the rendered chicken oil (RCO), moisture content ranged from 0.61 % (T₂) to 1.09 % (T₁) and the mean specific gravity was 0.91 at 30 °C. The FFA values of RCO obtained from the T₃ rendering regimen were significantly (p < 0.05) higher than the FFA values of T₂ and T₁. The mean acid value, iodine number, peroxide value, saponification value and unsaponifiable matter present in RCO showed no significant difference. The fatty acid profile and calorific values were studied. The RCO was converted to biodiesel by transesterification and the physico-chemical properties of the biodiesel were studied and compared with the Indian biodiesel specification.     

Effects of axial circulation and dispersion geometry on the scale‐up of ultrasonic extraction of polysaccharides

The ultrasonic‐assisted extraction of polysaccharides (PS) from Ganoderma lucidum, was subjected to a scale‐up study. 0.25 L extractor was used to optimize the extraction conditions toward maximum yield of PS. The extracted PS was observed to be reduced by increasing the scale from 1 to 6 L. To intensify the extraction, axial circulation at different stirring rates was induced and optimized in a 3 L U‐tube extractor. Although circulation at 300 rpm improved the yield of PS for 3 L, introducing dispersion geometry (conical funnel) and adjusting the radiation distance in a 6 L U‐tube extractor further intensified the extraction efficiency. A radiation distance of 4 cm and circulation induced using 600 rpm enhanced the PS as compared to the conventional 6 L extractor. Overall, the scale‐up from 0.25 to 6 L was successful and introducing circulation and dispersion geometry intensified the extraction efficiency under similar dissipation of ultrasonic power. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1483–1491, 2015     

Information-Lossless Space&#8211;Time Block Codes From Crossed-Product Algebras

It is known that the Alamouti code is the only complex orthogonal design (COD) which achieves capacity and that too for the case of two transmit and one receive antenna only. Damen proposed a design for two transmit antennas, which achieves capacity for any number of receive antennas, calling the resulting space-time block code (STBC) when used with a signal set an information-lossless STBC. In this paper, using crossed-product central simple algebras, we construct STBCs for arbitrary number of transmit antennas over an a priori specified signal set. Alamouti code and quasi-orthogonal designs are the simplest special cases of our constructions. We obtain a condition under which these STBCs from crossed-product algebras are information-lossless. We give some classes of crossed-product algebras, from which the STBCs obtained are information-lossless and also of full rank. We present some simulation results for two, three, and four transmit antennas to show that our STBCs perform better than some of the best known STBCs and also that these STBCs are approximately 1 dB away from the capacity of the channel with quadrature amplitude modulation (QAM) symbols as input     

Enhanced Mechanical Properties and Corrosion Behavior of Biodegradable Mg-Zn/HA Composite

Metallurgical and Materials Transactions A - Magnesium (Mg) and its alloys have shown potential for use in the biomedical industry due to their excellent biological performance and biodegradability...     

Application-Aware Acceleration for Wireless Data Networks: Design Elements and Prototype Implementation

A tremendous amount of research has been done toward improving transport-layer performance over wireless data networks. The improved transport layer protocols are typically application-unaware. In this paper, we argue that the behavior of applications can and does dominate the actual performance experienced. More importantly, we show that for practical applications, application behavior all but completely negates any improvement achievable through better transport layer protocols. In this context, we motivate an application-aware, but application transparent, solution suite called A³ (application-aware acceleration) that uses a set of design principles realized in an application-specific fashion to overcome the typical behavioral problems of applications. We demonstrate the performance of A³ through both emulations using realistic application traffic traces and implementations using the NetFilter utility.     

Impact of Inspected Buffers on Production Parameters of Construction Processes

This paper examines the production implications of quality control inspections conducted on the buffer between processes in a construction project by modeling the linkage between these processes. Inspection of partially completed work at the end of one activity but before the beginning of work by the next activity is fairly common. Work that is deemed to be of sufficient quality is then made available for the next activity. Work that is deemed insufficient requires rework, typically by the trade appropriate to the activity that fed into the buffer, to bring the work into compliance. This has implications for workload management for that trade, of course, as well as for the reliability of work flow to the successor or downstream processes. While such situations are common in all construction sectors, an example from the residential construction sector was examined via a simulation model augmented by field data collected from residential construction projects. The impacts of the work flow into the predecessor process, the inspection pass rate, and resource availability were examined. The inspection pass rate was found to dramatically affect the reliability of work flow, unless resources are unlimited. Furthermore, the inspection pass rate was found to be functionally related to the production parameters of the process.     

Scheduled WiFi using distributed contention in WLANs: algorithms,experiments, and case-studies

The ubiquitous adoption of WiFi introduces large diversity in types of application requirements and topological characteristics. Consequently, considerable attention is being devoted to making WiFi networks controllable without compromising their scalability. However, the main MAC protocol of WiFi, distributed coordination function (DCF), is a contention-based protocol using random backoff. Thus, operating under DCF, the access of channel is hard to control and nonpredictable. In order to provide controllability of channel access in WiFi, we propose Rhythm, a MAC protocol that achieves scheduled WiFi efficiently using distributed contention. By achieving scheduled WiFi, channel access can be controlled by manipulating the schedule decision. We evaluate the performance of Rhythm through analysis, experiments, and case-studies.     

A web-based remote interactive laboratory for Internetworking education

A Web-based remote interactive laboratory (RIL) developed to deliver Internetworking laboratory experience to geographically remote graduate students is presented in this paper. The onsite Internetworking program employs hands-on laboratories in a group setting that correlates with the constructivist and collaborative pedagogical approach. This paper discusses the pedagogical and technical considerations that influence the design and implementation of the remote laboratory environment given the constraints of the special hardware and learning outcomes of the program. For wide-ranging usability, the remote Internetworking (INWK) laboratory uses de facto networking standards and commercial and broad-band Internet connectivity to ensure real-time secure interaction with equipment. A four-tier role architecture consisting of faculty, local facilitators, remote facilitators, and students has been determined appropriate to maintain academic integrity and ensure good quality of interaction with the remote laboratory. A survey employing a five-point scale has been devised to measure the usability of the remote access INWK laboratory.