Using Transmission Laser Bonding Technique for Line Bonding in Microsystem Packaging

The transmission laser bonding (TLB) technique has been developed for the formation of continuous line bonds for microsystem packaging applications. Line bonds are generated by overlapping single bonding spots, in which the degree of overlapping is achieved by varying the scanning speed of the laser as it irradiates the bonding wafers. An analytical model has been developed to guide the TLB process, attaining a uniform laser intensity that produces uniform bonds, satisfying the bonding requirements. Guided by this model, experiments have been conducted to bond Pyrex glass-to-Si wafers at various bonding conditions. To demonstrate the reliability of the technique and the model developed, the strength of the resulting bonded pairs has been evaluated by a micro tensile tester. At contact pressures higher than 1 MPa, the strength of bonded lines can reach a stable value of 9.2 MPa, which is comparable to those obtained by other major bonding processes. To further understand the associated bonding mechanism, the bonded interface has also been analyzed using auger electron spectroscopy and X-ray photoelectron spectroscopy, quantifying the drifting or diffusion of atoms that occurs between glass and Si wafers during the bonding process     

MLS‐based variable‐node elements compatible with quadratic interpolation. Part I: formulation and application for non‐matching meshes

Two‐dimensional variable‐node elements compatible with quadratic interpolation are developed using the moving least‐square (MLS) approximation. The mapping from the parental domain to the physical element domain is implicitly obtained from MLS approximation, with the shape functions and their derivatives calculated and saved only at the numerical integration points. It is shown that the present MLS‐based variable‐node elements meet the patch test if a sufficiently large number of integration points are employed for numerical integration. The cantilever problem with non‐matching meshes is chosen to check the feasibility of the present MLS‐based variable‐node elements, and the result is compared with that from the lower‐order case compatible with linear interpolation. Copyright © 2005 John Wiley & Sons, Ltd.     

Edge‐adaptive color interpolation for complementary color filter array

Complementary color filter array (CCFA) is widely used in consumer‐level digital video cameras, since it not only has high sensitivity and good signal‐to‐noise ratio in low‐light condition but also is compatible with the interlaced scanning used in broadcast systems. However, the full‐color images obtained from CCFA suffer from the color artifacts such as false color and zipper effects. These artifacts can be removed with edge‐adaptive color interpolation (ECI) approaches which are generally used in primary color filter array (PCFA). Unfortunately, the unique array pattern of CCFA makes it difficult that CCFA adopts ECI approaches. Therefore, to apply ECI approaches suitable for CCFA to color interpolation is one of the major issues to reconstruct the full‐color images. In this paper, we propose a new ECI algorithm for CCFA. To estimate an edge direction precisely and enhance the quality of the reconstructed image, a function of spatial variances is used as a weight, and new color conversion matrices are presented for considering various edge directions. Experimental results indicate that the proposed algorithm outperforms the conventional method with respect to both objective and subjective criteria. © 2006 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 16, 92–102, 2006     

球化处理对氢化脱氢钛粉特性及其注射成形喂料流变性能的影响

氢化脱氢(HDH)钛粉形状不规则、流动性较差,不利于注射成形和提高其制品性能。本文通过PCS系统对HDH钛粉末进行球化处理,考察了球化处理对HDH钛粉特性及其注射成形喂料流变性能的影响。结果表明:球化处理后的HDH钛粉末变为近球形,粉末的流动性显著提高,其注射成形喂料的流变性能得到明显改善;同时,球化处理后钛粉的烧结组织明显细化,致密度大幅度提高。     

Molecular dynamic study for nanopatterning using atomic force microscopy

The atomic force microscopy (AFM)-based nanolithographic technique is currently used to directly machine material surfaces and fabricate nanocomponents for microelectromechanical systems (MEMS) devices. In the current study, three-dimensional molecular dynamic (MD) simulations with potentials based on the Morse function were performed to evaluate the effect of crystallographic factors and process variables on the nanodeformation characteristics of the nanolithography processing of monocrystalline copper. Moreover, the effects of process variables (tool shape, cutting speed, and ploughing depth) on the nanostructural pattern are investigated. The simulation results revealed that the crystal orientation and ploughing direction had a significant influence on varying the forces (cutting force, thrust force, and width-direction force); the nature of the nanodeformation ahead of the tool; and the surface quality of the machined material.     

Emission Control of NO and SO2 for the High-Temperature and Low O2 Concentration Combustion of Coke by Urea and NH4HCO3

Urea and NH4HCO3 were used to control the emission of NO and SO2 from the combustion of coke at high-temperature and low oxygen concentration. Urea and NH4HCO3 could control NO emission only under 1100°C. Their effects disappeared above 1100°C even though the increase of urea and NH4HCO3 content from 10?to?50?wt?%. However, they showed good desulfurization effect on the emission of SO2 at all combustion temperatures and their effects showed remarkable results even at 1500°C. Only 10?wt?% of urea or NH4HCO3 could control the emission of SO2 effectively at 1400 and 1500°C. This effect was caused by ?NH and ?NH2 from the thermal decomposition of reducing agents at high temperature. Low O2 concentration showed little effect on the removal of SO2. Ammonia slip from the thermal decomposition of reducing chemical was not a considerable level.     

Psychophysiological Mediators of Caregiver Stress and Differential Cognitive Decline.

The authors examined relationships between chronic stress and cognitive decline and whether such relationships were mediated by psychophysiological factors. Ninety-six caregivers of spouses with Alzheimer's disease (AD) were compared with 95 similar noncaregiver spouses. All were free of diabetes. Although the groups started similarly, over 2 years caregivers declined by a small but significant amount (1 raw score point and 4 percentile points, each p     

Attention: Reaction Time and Accuracy Reveal Different Mechanisms.

The authors propose that there are 2 different mechanisms whereby spatial cues capture attention. The voluntary mechanism is the strategic allocation of perceptual resources to the location most likely to contain the target. The involuntary mechanism is a reflexive orienting response that occurs even when the spatial cue does not indicate the probable target location. Voluntary attention enhances the perceptual representation of the stimulus in the cued location relative to other locations. Hence, voluntary attention affects performance in experiments designed around both accuracy and reaction time. Involuntary attention affects a decision as to which location should be responded to. Because involuntary attention does not change the perceptual representation, it affects performance in reaction time experiments but not accuracy experiments. The authors obtained this pattern of results in 4 different versions of the spatial cuing paradigm. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Leak behavior of SCC degraded steam generator tubings of nuclear power plant

A forced outage due to a steam generator tube leak in a Korean nuclear power plant has been reported [Kim, J.S., Hwang, S.S., et al., 1999. KAERI Internal Report (Korean). Destructive analysis on pulled tubes from Ulchin unit 1. Korea Atomic Energy Research Institute]. Primary water stress corrosion cracking has occurred in many tubes in the plant, and they were repaired using sleeves or plugs. In order to develop proper repair criteria, it is necessary to understand the leak behavior of the tubes containing stress corrosion cracks. Cracked specimens were prepared using a room temperature cracking technique, and the leak rates and burst pressures of the degraded tubes were determined both at room temperature and at a high temperature. Some tubes with 100% through wall cracks did not show a leakage at 10.8 MPa, which is the typical pressure difference of the pressurized water reactors (PWRs) during a normal operation. In some tests, the leak rates of the tubes increased with time at a constant pressure. In a high temperature pressure test at 282 °C one specimen showed a very small leakage at 18.6 MPa, which stopped after a small increase in the test pressure. Because stress corrosion cracks can develop at relatively low stresses, even 100% through wall cracks can be so tight that they will not leak at a normal operating pressure.     

The method of fundamental solutions for inverse 2D Stokes problems

A numerical scheme based on the method of fundamental solutions is proposed for the solution of two-dimensional boundary inverse Stokes problems, which involve over-specified or under-specified boundary conditions. The coefficients of the fundamental solutions for the inverse problems are determined by properly selecting the number of collocation points using all the known boundary values of the field variables. The boundary points of the inverse problems are collocated using the Stokeslet as the source points. Validation results obtained for two test cases of inverse Stokes flow in a circular cavity, without involving any iterative procedure, indicate the proposed method is able to predict results close to the analytical solutions. The effects of the number and the radius of the source points on the accuracy of numerical predictions have also been investigated. The capability of the method is demonstrated by solving different types of inverse problems obtained by assuming mixed combinations of field variables on varying number of under- and over-specified boundary segments.