A comparative study of rate monotonic schedulability tests

With the increased penetration of real-time systems into our surroundings, the selection of an efficient schedulability test under fixed priority system from a plethora of existing results, has become a matter of primary interest to real-time system designers. The need for a faster schedulability tests becomes more prominent when it applies to online systems, where processor time is a sacred resource and it is of central importance to assign processor to execute tasks instead of determining system schedulability. Under fixed priority nonpreemptive real-time systems, current schedulability tests (in exact form) can be divided into: response time based tests, and scheduling points tests. To the best of our knowledge, no comparative study of these test to date has ever been presented. The aim of this work is to assist the system designers in the process of selecting a suitable technique from the existing literature after knowing the pros and cons associated with these tests. We highlight the mechanism behind the feasibility tests, theoretically and experimentally. Our experimental results show that response time based tests are faster than scheduling points tests, which make the response time based tests an excellent choice for online systems.     

Real-time infinite horizon tracking with data fusion for augmented reality in a maritime operations context

In this paper, we propose a method for real-time horizon tracking (i.e., separation line between the sky and the sea) in a maritime operations context. We present the fusion of an image processing algorithm with the data obtained from the inertial measurement unit (IMU). The initial aim is to filter out environmental conditions using inertial information in order to combine a video stream with onboard electronic charts. This is achieved by the detection of the horizon with an image processing algorithm in an area defined by the IMU. We then present an evaluation of the algorithm with regard to the rate of detection of the horizon and the impact of the image resolution on the computational time. The purpose of developing this method is to create an augmented reality maritime operations application. We combine the video stream with electronic charts in a single display. We use the position of the horizon in the image to split the display into different areas. Then, we use transparency to display the video, the electronic charts or both.     

XRD Analysis of the Role of Cesium in Sodium‐Based Geopolymer

The purpose of this work was to study the role of cesium in sodium‐based geopolymer and its thermal stability for nuclear waste management. A series of mixed sodium and cesium geopolymer samples (Na_1?x Cs _x )₂O·Al₂O₃·SiO₂·12H₂O (referred to as (Na_{1? x} Cs _x )‐GP, where x = 0, 0.08, 0.15, 0.42, 1) have been prepared. All geopolymer samples were heated at 1100°C for 24 h. Pollucite (CsAlSi₂O₆) and feldspathoid (CsAlSiO₄) were crystallized from Cs‐GP. Nepheline (NaAlSiO₄) and a small amount of crystallized silica were obtained from Na‐GP. The other geopolymers (Na_{1? x} Cs _x )‐GP (x = 0.08, 0.15, 0.42) led to pollucite and nepheline main phases. Amorphous silica phase was observed in all the geopolymer samples with various amounts. Phase quantification and scanning electron microscope revealed that higher Cs concentrations in Na‐GP tend to decrease the amorphous phase while improving pollucite and nepheline phase quantification. The amorphous geopolymers have also been studied by pair distribution function analysis. Tetrahedral chains formed by T–O bonding (with T = Si, Al) were shown to be more tighten around Cs⁺ than around Na⁺. It led to shorter Cs–T bond than Na–T bond matching the higher solvation property of Na⁺. Furthermore, thermal study analysis pointed out the fact that geopolymer samples (Na_{1? x} Cs _x )‐GP, can be considered as solid solutions.     

Influence of Ammonium Pentaborate (APB) on the Performance of Urea Formaldehyde (UF) Adhesives for Plywood

Ammonium pentaborate (APB) was used to modify urea formaldehyde (UF) resins, in which the formaldehyde to urea molar ratio was set at 1.80, 1.50, 1.25, and 1.05. Some specific properties, including gel time, free formaldehyde content in UF, bond strength, and formaldehyde emission levels from plywood were evaluated. The result showed that APB increased the gel time length, but also decreased free formaldehyde content and emission levels, which was reduced mostly by 79.0% and 81.4%, respectively. The result of bond strength indicated that APB was proper to modify high F/U molar ratio of UF resin regardless of the loading level, but a recommended loading level should be considered to relevantly lower the F/U molar ratio of UF. The suggested loading level of APB to UF is 8.0% to 6.0%, 6.0%, and 4.0% to UF resin with F/U molar ratio of 1.8, 1.5, and 1.25 separately.     

On‐Demand Wrinkling Patterns in Thin Metal Films Generated from Self‐Assembling Liquid Crystals

In this work, a new, universal method is described that uses the photopatterning of liquid crystals, which is accurately translated into a controlled, intricately wrinkled metal surface. Remarkably, the patterns have an oscillation in amplitude of the wrinkles. This rapid method allows generation of intricate multidomain patterns and continuous circular structures, including azimuthal, radial, and even higher complexity arrangements as examples. These wrinkled gold surfaces are also strikingly visual, which is interesting for applications ranging from diffractive elements to fine jewelry.     

BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

An economic and environment friendly process was adapted to synthesize new dielectric composite materials. Using ethylene vinyl acetate (EVA)/vinyl ester of versatic acid (VeoVa) terpolymer as an aqueous emulsion provides a homogenous dispersion of BaTiO₃ (BT) particles, due to the high viscosity and polarity of the vinyl resin (VR). Composites films were obtained from these dispersions by water evaporation. The evolution of the dielectric properties as a function of the BaTiO₃ content, was correctly fitted by a Maxwell‐Garnett model. This fitting of the experimental curve shows a good dispersion of filler in the vinyl resin and the particles separation by a layer of resin as expected for the preparation method used in this study. The VR/BT composites show good synergy between the dielectric properties of the different phases of the composites due to the formation of macrodipoles and to the strong interactions between polar EVA/VeoVa groups and the BaTiO₃ particles surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44333.     

Influence of Microstructure and Surface Activation of Dual‐Phase Membrane Ce0.8Gd0.2O2−δ–FeCo2O4 on Oxygen Permeation

Dual‐phase oxygen transport membranes are fast‐growing research interest for application in oxyfuel combustion process. One such potential candidate is CGO‐FCO (60 wt% Ce_0.8Gd_0.2O_2?δ–40 wt% FeCo₂O₄) identified to provide good oxygen permeation flux with substantial stability in harsh atmosphere. Dense CGO‐FCO membranes of 1 mm thickness were fabricated by sintering dry pellets pressed from powders synthesized by one‐pot method (modified Pechini process) at 1200°C for 10 h. Microstructure analysis indicates presence of a third orthorhombic perovskite phase in the sintered composite. It was also identified that the spinel phase tends to form an oxygen deficient phase at the grain boundary of spinel and CGO phases. Surface exchange limitation of the membranes was overcome by La_0.6Sr_0.4Co_0.2Fe_0.8O_3?δ (LSCF) porous layer coating over the composite. The oxygen permeation flux of the CGO‐FCO screen printed with a porous layer of 10 μm thick LSCF is 0.11 mL/cm² per minute at 850°C with argon as sweep and air as feed gas at the rates of 50 and 250 mL/min.     

Poly(butylene succinate‐co‐butylene adipate)/polyethylene oxide blends for controlled release materials: A morphological study

Varying the formulation and processing conditions of polymer blends allows the design of materials with a large range of morphologies. Active materials embedding active compounds in a devoted phase are promising applications of such blends, offering possible various transport properties. In this study, 13 poly(butylene succinate‐co‐butylene adipate) (PBSA)/polyethylene oxide (PEO) blends were extruded in a slit die. Their morphologies were characterized by water extraction (selective PEO dissolution), FTIR spectroscopy, and differential scanning calorimetry. Transport properties were assessed by water vapor permeation and fluorescein release as model migrant. Indeed, the desorption in water of fluorescein (previously entrapped in PEO) was monitored to preliminary investigate the release properties of these materials: two morphologies were obtained (i) pseudo multilayer films made of PEO‐rich layer/PBSA‐rich layer/PEO‐rich layer and (ii) PEO nodules dispersed in the PBSA‐rich matrix for the highest PBSA contents. The first systems were erodible ones with an uncontrolled fast delivery by PEO dissolution whereas the second ones showed a controlled release by permeation through the PBSA matrix from PEO nodules. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42874.     

Enhancing laccase stability and activity for dyes decolorization using ZIF-8@MWCNT nanocomposite

The continuous use of chemical dyes in various industries, and their discharge into industrial effluents, results in severe problems to human life and water pollution. Laccases have the ability to decolorize dyes and toxic chemicals in industrial effluents as green biocatalysts. Their possible industrial applications have been limited by poor reusability, low stability, and loss of free laccase action. In this research, laccase was immobilized on zeolitic imidazolate framework coated multi-walled carbon nanotubes (Laccase@ZIF-8@MWCNTs) via metal affinity adsorption to develop an easy separable and stable enzyme. The optimum reaction conditions for immobilized laccase are at a pH of 3.0 and a temperature of 60?℃. The immobilized laccase was enhanced in storage and thermal stability. The results indicated that Laccase@ZIF-8@MWCNTs still maintained 68% of its original activity after 10 times of repeated use. Most importantly, the biocatalytic system was applied for decolorization of different dyes (20?mg·L^?1) without a mediator, and up to 97.4% for Eriochrome black T and 95.6% Acid red 88 was achieved in 25 min. Biocatalysts with these properties may be used in a variety of environmental and industrial applications.