Towards a Dual-Tip STM Application in Mesoscopic Electron Transport

A new design for a dual-tip scanning tunneling microscope (STM) is presented. The design is a variation on the mechanically controllable break-junction with two electron beam-induced deposition nano-tips. The new design enables one to scan surfaces simultaneously with two probes having a nano-gap separation. By collecting the lateral current flowing between the tips, the transconductance map can then be compared with the STM images for local characterizations of the electron transport. Since the lateral beam carries the property of the density of states of the surface at momentum space, the dispersion of the electronic structure should give an orientation and position dependence of the local transconductance current. In addition, the reduced terminal separation, on the order of the characteristic mesoscopic length scales, is likely to be sensitive to a variety of typically observed interactions and interference effects.     

A Multicriteria Decision Support Methodology for Annual Rehabilitation Programs of Water Networks

Abstract:   This article provides an overview of a multicriteria decision support methodology for annual rehabilitation programs of water networks. A first set of criteria is formulated for the purpose of comparing and ranking rehabilitation projects. Each proposed criterion is a measure of a particular impact of the condition of a pipe. The ELECTRE TRI method is implemented for defining rehabilitation priorities . Two reference profiles are used to define the limits of three categories associated with three increasing priority levels. With these two reference profiles, applying the ELECTRE TRI method to an asset stock ( a set of pipes that are candidates for rehabilitation ) means assigning each pipe to one of six possible priority groups. A second set of criteria, based on the concept of efficiency, is proposed for comparing alternative rehabilitation programs ( subsets of the asset stock ).     

Multiconfiguration Dirac-Fock wavelengths and transition rates in the X-ray spectra of highly charged Ga-like ions from Yb to U

A multiconfiguration Dirac-Fock (MCDF) technique has been used for computing the wavelengths and transition probabilities for lines in the X-ray spectra of the gallium-like ions from Yb XL to U LXII. Results are presented for the 4s²4p-4s²4d and 4s²4p-4s4p² allowed transitions (E1) as well as for the forbidden transitions (M1 and E2) within the ground configuration 4s²4p. A comparison of the calculated wavelengths with the few experimental results available is also presented.     

Microstructure and mechanical properties of modified and non-modified stir-cast Al-Si hypoeutectic alloys

The microstructure and mechanical properties of modified and non-modified stir-cast commercial aluminium alloys A-S7G03 and A-S4G have been investigated. Stir casting of these alloys resulted in spherical and/or rosette shape primary -phase, and the eutectic silicon was broken into miniature needle morphology. This stir-cast structure slightly improved the mechanical properties in comparison to those of conventionally cast alloys, however the fracture of the stir-cast alloys revealed intergranular brittle fracture. The addition of 0.02% strontium, in the form of Al-5 mass% Sr master alloy, during stir casting modified the eutectic silicon into a very fine spheroidal morphology, while the -phase particle showed the same morphology as the stir-cast alloys. This novel structure resulted in significant improvement of mechanical properties. The elongation of the modified stir-cast alloys was five times greater than that of the non-modified one. A transgranular mode of fracture was observed for the modified stircast alloys, moreover smooth ripple and dimple patterns were observed reflecting the high ductility of the modified stir-cast alloys.     

Development of poly(vinyl chloride)/wood composites. A literature review

Poly(vinyl chloride)/wood fiber (flour) composites are currently experiencing a dramatic increase in use. Most of them are used to produce window/door profiles, decking, railing, and siding by using conical counterrotating intermeshing twin‐screw extruders. Heat stabilizers, processing aids, impact modifiers, lubricants, and pigments are still important for PVC/wood composite formulations. Poly[methylene(polyphenyl isocyanate)] (PMPPIC), γ‐aminopropyltriethoxysilane, maleated polypropylene (MAPP), and copper metallic complex have proved to be effective coupling agents for this composite system. Mechanical properties of PVC/wood composites can be enhanced by combining wood with mica or glass fibers to form hybrid reinforcements. Ultraviolet light resistance and weathering dimensional stabilities of PVC/wood composites are superior to those of natural wood. Density reduction can be achieved through the microcellular foaming technique by using chemical blowing agents, such as azodicarbonamide and sodium bicarbonate, or physical blowing agents, such as carbon dioxide. J. Vinyl Addit. Technol. 10:59–69, 2004. © 2004 Society of Plastics Engineers.     

Scalable,low complexity,and fast greedy scheduling heuristics for highly heterogeneous distributed computing systems

For heterogeneous distributed computing systems, important design issues are scalability and system optimization. Given such systems, it is crucial to develop low computational complexity algorithms to schedule tasks in a manner that exploits the heterogeneity of the resources and applications. In this paper, we report and evaluate three scalable, and fast scheduling heuristics for highly heterogeneous distributed computing systems. We conduct a comprehensive performance evaluation study using simulation. The benchmarking outlines the performance of the schedulers, representing scalability, makespan, flowtime, computational complexity, and memory utilization. The set of experimental results shows that our heuristics perform as good as the traditional approaches, for makespan and flowtime, while featuring lower complexity, lower running time, and lower used memory. The experimental results also detail the various scenarios under which certain algorithms excel and fail.     

Alkaline fuel cells: contemporary advancement and limitations

ZeTek Power recently introduced mass manufacturable and cost effective alkaline fuel cells on the market. Today's research is focused on further improvement both in terms of performance increase and cost reduction. This research is classically performed using small (4 cm²) experimental electrodes in the half-cell configuration. This allows the primary electrochemical losses in an anode or cathode to be determined independently. Additional performance losses occur when one integrates large electrodes into a module of 24 cells and in a stack comprised of many modules. By comparing the performance of half-cell experiments to that of modules, these losses can be distinguished and addressed. The information thus obtained, both for the small electrodes and in up-scaling is vital if one is to identify the key areas in which improvement is possible and where to focus future research. Furthermore, the identification of the losses in a module and system allows us to predict the final performance from half-cell measurements of a new laboratory scale experimental electrode.     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.     

Optimizing BRDF orientations for the manipulation of anisotropic highlights

This paper introduces a system for the direct editing of highlights produced by anisotropic BRDFs, which we call anisotropic highlights. We first provide a comprehensive analysis of the link between the direction of anisotropy and the shape of highlight curves for arbitrary object surfaces. The gained insights provide the required ingredients to infer BRDF orientations from a prescribed highlight tangent field. This amounts to a non‐linear optimization problem, which is solved at interactive framerates during manipulation. Taking inspiration from sculpting software, we provide tools that give the impression of manipulating highlight curves while actually modifying their tangents. Our solver produces desired highlight shapes for a host of lighting environments and anisotropic BRDFs.