Synthesis and Evaluation of Water‐Soluble Prodrugs of Ursodeoxycholic Acid (UDCA), an Anti‐apoptotic Bile Acid

Ursodeoxycholic acid (UDCA) is a bile acid with demonstrated anti‐apoptotic activity in both in vitro and in vivo models. However, its utility is hampered by limited aqueous solubility. As such, water‐soluble prodrugs of UDCA could have an advantage over the parent bile acid in indications where intravenous administration might be preferable, such as decreasing damage from stroke or acute kidney injury. Five phosphate prodrugs were synthesized, including one incorporating a novel phosphoryloxymethyl carboxylate (POMC) moiety. These prodrugs were highly water‐soluble, but showed significant differences in chemical stability, with oxymethylphosphate prodrugs being the most unstable. In a series of NMR experiments, the POMC prodrug was bioactivated to UDCA by alkaline phosphatase (AP) faster than a prodrug containing a phosphate directly attached to the alcohol at the 3‐position of UDCA. Both of these prodrugs showed significant anti‐apoptotic activity in a series of in vitro assays, although the POMC prodrug required the addition of AP for activity, while the other compound was active without exogenous AP.     

Adamantyl Arotinoids That Inhibit IκB Kinase α and IκB Kinase β

A series of analogues of the adamantyl arotinoid (AdAr) chalcone MX781 with halogenated benzyloxy substituents at C2′ and heterocyclic derivatives replacing the chalcone group were found to inhibit IκBα kinase α (IKKα) and IκBα kinase β (IKKβ) activities. The growth inhibitory capacity of some analogues against Jurkat T cells as well as prostate carcinoma (PC‐3) and chronic myelogenous leukemia (K562) cells, which contain elevated basal IKK activity, correlates with the induction of apoptosis and increased inhibition of recombinant IKKα and IKKβ in vitro, pointing toward inhibition of IKK/NFκB signaling as the most likely target of the anticancer activities of these AdArs. While the chalcone functional group present in many dietary compounds has been shown to mediate interactions with IKKβ via Michael addition with cysteine residues, AdArs containing a five‐membered heterocyclic ring (isoxazoles and pyrazoles) in place of the chalcone of the parent system are potent inhibitors of IKKs as well, which suggests that other mechanisms for inhibition exist that do not depend on the presence of a reactive α,β‐unsaturated ketone.     

Near‐infrared spectroscopy for analysis of oil content and fatty acid profile in almond flour

Almond kernels show large variability for oil content and fatty acid profile. The objective of this research was to evaluate the potential of near infrared (NIR) reflectance spectroscopy (NIRS) for the analysis of these traits in almond flour. Ground kernels of 181 accessions collected in 2009 were used for developing calibration equations for oil content and concentrations of individual fatty acids. Calibration equations were developed using second derivative transformation and modified partial least squares regression. They were validated with samples from 179 accessions collected in 2010. The accuracy of calibration equations was measured through the coefficient of determination (r²) in external validation and the ratio of the SD in the validation set to the standard error of prediction (RPD). Both r² and RPD were high for oil content (r² = 0.99; RPD = 9.24) and concentrations of oleic (r² = 0.97; RPD = 5.37) and linoleic acids (r² = 0.98; RPD = 7.35), revealing that calibration equations for these traits are highly accurate. Conversely, the accuracy of the calibration equations for palmitic (r² = 0.54; RPD = 1.41) and stearic acids (r² = 0.52; RPD = 1.44) was too low for allowing their application in practice. NIRS discrimination of oil content and concentrations of oleic and linoleic acids was mainly based on the spectral region from 2240 to 2380 nm. Practical applications : NIRS is a high‐throughput analytical technique that allows fast measurement of several traits in a single analysis without using chemical reagents. We evaluated the feasibility of analyzing oil content and concentrations of palmitic, stearic, oleic, and linoleic acids in almond flour using fruits collected during 2 years from a world germplasm collection. The fruits collected in 2009 were used for NIRS calibration, whereas the fruits collected in 2010 were used for validation. NIRS equations were highly accurate for measuring oil content and concentrations of oleic and linoleic acids, which are important traits defining the quality of almond flour for specific uses in the food industry. These results have applications both in the research laboratory and the food industry, where NIRS is becoming a widely used technique for quality control.     

Phase‐dependent binary interaction parameters in industrial low‐density polyethylene separators

In the production process of low‐density polyethylene (LDPE), an important step is the flash separation of monomers and other small molecules from the polymer produced. The process is carried out adiabatically in two stages. To improve the performance of thermodynamic models, it is very important to analyze the use of model binary interaction parameters (BIP) dependent on the phase characteristics for each phase (phase‐dependent BIP). In this work the PC‐SAFT (perturbed‐chain statistical associating fluid theory) equation of state (EOS) is applied to the flash simulation of LDPE industrial separators using eight different resins. The main numerical aspects are examined with emphasis on the optimization strategy for the EOS BIP that explicitly characterizes each phase involved separately. The results demonstrate good predictive behavior. As a result of improved and more consistent modeling, a new strategy for optimized operation can be envisaged for the sequence of separators. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2106–2117, 2013     

Preparation,characterization, and release properties of hydrogels based on hyaluronan for pharmaceutical and biomedical use

Hyaluronic acid (HA) is a natural polysaccharide that is widely distributed in the human body. Its physicochemical properties and high biocompatibility make it a good candidate for biomedical and pharmaceutical uses. In the present work, we report HA‐based hydrogels that could be applied as drug delivery systems or as implants for the treatment of joint diseases. We use butanediol diglycidyl ether as a chemical crosslinker to obtain HA hydrogels. Using a new dissolution tester and ketoprofen (KP) as a model drug, we study the release properties of the hydrogels. We obtain homogeneous and transparent hydrogels with high strength and elasticity. The swelling ratio (SR) depends on the crosslinker concentration and pH of the medium. We also reveal differences between the release profile of KP from swollen and unswollen hydrogels. The characteristics and differences in KP release profiles depending on the SR suggest the possibility of obtaining controlled release from HA‐based hydrogels. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1377‐1382, 2013     

Preparation and characterization of acrylic acid/itaconic acid hydrogel coatings containing silver nanoparticles

Hydrogel silver nanocomposites have been used in applications with excellent antibacterial performance. Acrylic acid (AA)/itaconic acid (IA) hydrogels silver nanocomposites were prepared and applied as a coating on a textile substrate. Hydrogel matrices were synthesized first by the polymerization of an AA/IA aqueous (80/20 v/v) solution and mixed with 2‐2‐azobis(2‐methylpropionamide) diclorohydrate and N,N′‐methylene bisacrylamide until the hydrogel was formed. Silver nanoparticles were generated throughout the hydrogel networks with an in situ method via the incorporation of the silver ions and subsequent reduction with sodium borohydride. Cotton (C) and cotton/polyester (CP) textile fibers were then coated with these hydrogel silver nanocomposites. The influence of these nanocomposite hydrogels on the properties of the textile fiber were investigated by infrared spectroscopy (attenuated total reflectance), scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and antibacterial tests against Pseudomona aeruginosa and Staphylococcus aureus. The better conditions, in which no serious aggregation of the silver nanoparticles occurred, were determined. It was proven that the textiles coated with hydrogels containing nanosilver had an excellent antibacterial abilities. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2713–2721, 2013     

Epoxy/poly(ɛ‐caprolactone) nanocomposites: Effect of transformations of structure on crystallization

The influence of morphology of the epoxy/poly(?‐caprolactone) (PCL) system and corresponding nanocomposites with organophilized layered silicate on PCL crystallization was studied by differential scanning calorimetry, scanning, and transmission electron microscopy. The results obtained indicate a significant affecting of nonisothermal PCL crystallization by phase morphology brought about by the reaction‐induced phase separation (RIPS) influenced either by various nanoclay contents or the epoxy/PCL ratio. Dispersed morphology of PCL matrix with epoxy globules induces crystallization at higher temperatures. The inverse dispersed morphology of epoxy matrix with PCL inclusions causes crystallization at lower temperature. The co‐continuous morphology induces crystallization in both steps. Rate of the second crystallization step is substantially higher than that in the first step. No nucleation effect has been found in the nanocomposites with the added nanofiller. Multicomponent samples show retarded crystallization, i.e., lower crystallinities and lower overall crystallization rate compared with neat PCL. The results obtained suggest that it is primarily morphological/interfacial effects that play a decisive role in the crystallization behavior of PCL in the epoxy/PCL/clay system. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3197–3204, 2013     

Structural Study of the Partially Disordered Full‐Length δ Subunit of RNA Polymerase from Bacillus subtilis

The partially disordered δ subunit of RNA polymerase was studied by various NMR techniques. The structure of the well‐folded N‐terminal domain was determined based on inter‐proton distances in NOESY spectra. The obtained structural model was compared to the previously determined structure of a truncated construct (lacking the C‐terminal domain). Only marginal differences were identified, thus indicating that the first structural model was not significantly compromised by the absence of the C‐terminal domain. Various ¹⁵N relaxation experiments were employed to describe the flexibility of both domains. The relaxation data revealed that the C‐terminal domain is more flexible, but its flexibility is not uniform. By using paramagnetic labels, transient contacts of the C‐terminal tail with the N‐terminal domain and with itself were identified. A propensity of the C‐terminal domain to form β‐type structures was obtained by chemical shift analysis. Comparison with the paramagnetic relaxation enhancement indicated a well‐balanced interplay of repulsive and attractive electrostatic interactions governing the conformational behavior of the C‐terminal domain. The results showed that the δ subunit consists of a well‐ordered N‐terminal domain and a flexible C‐terminal domain that exhibits a complex hierarchy of partial ordering.