Development of color in fats stabilized with amino-hexose-reductones

Summary Amino reductones derived from hexoses were evaluated for color development in heated, oxidizing fat systems. Browning was observed to some extent with all the amino-hexose-reductones. The brown color frequently faded upon long heating of the oils. The density of color increased with reductone concentration and varied markedly among the different amino reductones. Morpholino-hexose-reductone could be used in lard and vegetable oils at concentrations up to 0.01% without introducing visually detectable amounts of color. Heating soybean oil solutions of the amino reductones at 100°C. under vacuum slowly destroyed the reductone but did not cause development of color. Air or oxygen was required for color production. Addition of citric acid along with the reductone reduced the amount of color developed. Reductones in fat systems show similarities in browning to reductones in aqueous systems. New considerations for the mechanism of antioxidation by polyphenols and reductones in oils are presented. Presented at the spring meeting, American Oil Chemists’ Society. New Orleans, La., April 28-May 1, 1957.     

Elastic Properties and Microcracking Behavior of Particulate Titanium Diboride–Silicon Carbide Composites

The spontaneous microcracking of particulate TiB₂–SiC composites is studied as a function of TiB₂ volume fraction. The degree of microcracking was examined by measuring elastic properties from room temperature to 1300°C. The results showed that only one composition contains microcracks. All other compositions did not microcrack regardless of TiB₂ volume fraction. This was attributed to the difference in the sintering aids. In particular, the Al₂O₃ sintering aid needed in these compositions had reacted with SiO₂ to form an amorphous grain boundary phase that allowed residual stresses to relax by viscous flow at moderate to high temperatures. The existence of this amorphous grain boundary phase was directly observed by transmission electron microscopy.     

Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds

The surface alkaline hydrolysis of fibers made from poly(trimethylene terephthalate) (PTT) was studied after extruding the polymer at high spinning speeds from 2000 to 6000 m/min and heat setting in the range of temperatures from 100 to 180°C. Fiber weight loss increased with an increasing heat‐setting temperature but it was also dependent on the spinning speed. Some of the partially hydrolyzed fibers had a well‐developed, hydrophilic surface, and pore size in the range of 0.69 to 1.20 μm. The optimum reaction and morphological conditions for increasing porosity in PTT fibers depends on spinning speed and heat‐setting temperature. A temperature of 180°C is the upper limit for heat‐setting PTT filaments but seems to be the most effective for making porous fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1724–1730, 2004     

Parallelizing Complex Streaming Applications on Distributed Scratchpad Memory Multicore Architecture

Multicore processors can provide sufficient computing power and flexibility for complex streaming applications, such as high-definition video processing. For less hardware complexity and power consumption, the distributed scratchpad memory architecture is considered, instead of the cache memory architecture. However, the distributed design poses new challenges to programming. It is difficult to exploit all available capabilities and achieve maximal throughput, due to the combined complexity of inter-processor communication, synchronization, and workload balancing. In this study, we developed an efficient design flow for parallelizing multimedia applications on a distributed scratchpad memory multicore architecture. An application is first partitioned into streaming components and then mapped onto multicore processors. Various hardware-dependent factors and application-specific characteristics are involved in generating efficient task partitions and allocating resources appropriately. To test and verify the proposed design flow, three popular multimedia applications were implemented: a full-HD motion JPEG decoder, an object detector, and a full-HD H.264/AVC decoder. For demonstration purposes, SONY PlayStation \(^{\circledR }\) 3 was selected as the target platform. Simulation results show that, on PS3, the full-HD motion JPEG decoder with the proposed design flow can decode about 108.9 frames per second (fps) in the 1080p format. The object detection application can perform real-time object detection at 2.84 fps at \(1280 \times 960\) resolution, 11.75 fps at \(640 \times 480\) resolution, and 62.52 fps at \(320 \times 240\) resolution. The full-HD H.264/AVC decoder applications can achieve nearly 50 fps.     

FAIRIO: A Throughput-oriented Algorithm for Differentiated I/O Performance

Providing differentiated service in a consolidated storage environment is a challenging task. To address this problem, we introduce FAIRIO, a cycle-based I/O scheduling algorithm that provides differentiated service to workloads concurrently accessing a consolidated RAID storage system. FAIRIO enforces proportional sharing of I/O service through fair scheduling of disk time. During each cycle of the algorithm, I/O requests are scheduled according to workload weights and disk-time utilization history. Experiments, which were driven by the I/O request streams of real and synthetic I/O benchmarks and run on a modified version of DiskSim, provide evidence of FAIRIO’s effectiveness and demonstrate that fair scheduling of disk time is key to achieving differentiated service in a RAID storage system. In particular, the experimental results show that, for a broad range of workload request types, sizes, and access characteristics, the algorithm provides differentiated storage throughput that is within 10% of being perfectly proportional to workload weights; and, it achieves this with little or no degradation of aggregate throughput. The core design concepts of FAIRIO, including service-time allocation and history-driven compensation, potentially can be used to design I/O scheduling algorithms that provide workloads with differentiated service in storage systems comprised of RAIDs, multiple RAIDs, SANs, and hypervisors for Clouds.     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

A group decision classifier with particle swarm optimization and decision tree for analyzing achievements in mathematics and science

Group decision making is a multi-criteria decision-making method applied in many fields. However, the use of group decision-making techniques in multi-class classification problems and rule generation is not explored widely. This investigation developed a group decision classifier with particle swarm optimization (PSO) and decision tree (GDCPSODT) for analyzing students’ mathematic and scientific achievements, which is a multi-class classification problem involving rule generation. The PSO technique is employed to determine weights of condition attributes; the decision tree is used to generate rules. To demonstrate the performance of the developed GDCPSODT model, other classifiers such as the Bayesian classifier, the k-nearest neighbor (KNN) classifier, the back propagation neural networks classifier with particle swarm optimization (BPNNPSO) and the radial basis function neural networks classifier with PSO (RBFNNPSO) are used to cope with the same data. Experimental results indicated the testing accuracy of GDCPSODT is higher than the other four classifiers. Furthermore, rules and some improvement directions of academic achievements are provided by the GDCPSODT model. Therefore, the GDCPSODT model is a feasible and promising alternative for analyzing student-related mathematic and scientific achievement data.     

Solar Photocatalytic Degradation of Textile Dyes in TiO2 Suspended Solutions

The degradation and decolourization of direct dye (Everdirect supra turguoise blue, FBL), acidic dye (Isolan orange S-RL) and vat dye (Indanthren red FBB) have been investigated by solar/TiO2 process. The effects of solution pH, dye concentration, dosage of TiO2 and nano-size of TiO2 have been studied. The increase in initial pH (3, 5 and 11) and dye concentration decrease the removal rate. The treatment for FBB and FBL dye solutions is more efficient than that of S-RL.Under optimum conditions, the color removal is found to be almost complete for FBB and FBL while that of S-RL also reaches 95%. Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model (L-H model) have been fitted to the experimental data and found to correlate the adsorption patterns as well as the kinetics of the dyes studied.     

ADHESION OF ELASTOMERS: DWELL TIME EFFECTS

The strength of adhesion of elastomers to rigid substrates generally increases with time of contact. This effect has been studied for samples of butyl and chlorobutyl rubber adhering to some rigid substrates. The peel strength increased continuously over long periods of contact until in some cases failure became cohesive within the elastomer layer. At higher temperatures the strength increased more rapidly, consistent with the WLF relation governing molecular motions. It is postulated that slow molecular rearrangements occur at the interface and increase the bond strength. A criterion for the observed transition from interfacial to cohesive failure is suggested.