Traffic officers'' attitudes toward blood alcohol law enforcement

Research findings in other countries suggest that drinking driving laws could be much better enforced even without resorting to special patrols or random checks. It has been reported that law enforcement officers apprehend or breath test only a small fraction of the potentially impaired drivers that they normally encounter on patrol. This survey of New Zealand traffic officers was designed to determine the extent to which this was the case here, and what were the major disincentives to breath testing. Traffic officer responses, obtained on an anonymous questionnaire, suggested that there were not so many missed opportunities as had been suggested by others, but that there was a great deal of variability in the number of drinking drivers detected by different officers. This was confirmed by the actual distribution of breath testing activity, which was markedly different in shape (positively skewed) compared to the distribution of traffic enforcement activities in general. Several clues from the disincentives cited on the questionaire suggested that there are major deterrents to a greater degree of alcohol enforcement activity on the part of most officers. These are discussed in terms of potential legislative changes, and in relation to the changes introduced in the 1978 Transport Act Amendment.     

Mechanism of alloying element vaporization during laser welding

Vaporization of alloying elements is a serious problem in the laser welding of many important engineering alloys. Since the available mass transfer correlations are not applicable for credible assessment of the rates of transport of vaporized species in the gas phase, the role of gas phase mass transfer in the overall vaporization of alloying elements was examined by conducting several critical experiments. The rates of transport of alloying elements in the weld pool were determined from numerically computed fluid flow fields. Since the weld pool is surrounded by plasma during laser welding, the role of plasma in the vaporization of alloying elements was physically modeled by allowing molten copper drops to vaporize isothermally both in the presence and absence of plasma. The transport of alloying elements in both liquid and gas phases was found to be rapid and the overall vaporization rates were controlled by the plasma influenced intrinsic vaporization of alloying elements at the weld pool surface. The experimentally obtained rates of vaporization of alloying elements from laser melted stainless steel weld pools were compared with the corresponding theoretically calculated values.     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

Religiosity and emotional disturbance: A test of Ellis's thesis in his own counseling center.

Assessed the validity of A. Ellis's (1971, 1973, 1981) contention that being religious was negatively correlated with mental health. 28 very religious, 34 atheist, and 33 religiously-neutral individuals seeking consultation were compared on the frequency and number of 8 reported problems. Contrary to Ellis's prediction, there were no significant differences among the groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

从供应链角度谈包装市场的发展趋势

在谈到商品包装装潢市场的发展趋势时,有必要先分析一下整个供应链.从根本上讲,推动整个供应链发展的是消费者.CPG(综合性消费品)公司将会影响消费者的选择,而消费者的这些选择对整个供应链会产生很大的波动性影响,使供应链的各个环节都发生动态变化.另外,由于技术、需求、生产力和交货期等因素的影响,也会使整个供应链发生一些折衷性的变化.     

建立基于模型设计文化的最佳策略

本文引入了基于模型设计的概念,突出了其中的一些优点,详细讨论了组织中采用基于模型设计文化的10个最佳策略。这些最佳策略从不同工业领域的公司中收集,包括向基于模型设计的成功或者不成功的过渡。     

Deposition of PtxRu1−x Catalysts for Methanol Oxidation in Micro Direct Methanol Fuel Cells

Platinum-ruthenium electrodes (Pt_xRu_1-x) have been prepared by electrochemical and electroless deposition and investigated as catalysts for the oxidation of methanol in acidic solutions. Pt_xRu_1-x deposits were electrochemically deposited from acidic chloride electrolytes at potentials between −0.46 and 0.34 V (vs. NHE). The composition of the electrodeposit was estimated by energy dispersive X-ray spectroscopy and is a strong function of the electrode potential. An empirical model for the deposition process is presented and kinetic parameters are estimated and discussed. Also, the methanol oxidation activity of the Pt_xRu_1-x catalysts was characterized by cyclic voltammetry in 1.0 M CH₃OH, 1.0 M H₂SO₄ solutions. Electroless Pt_xRu_1-x samples were prepared in a modified Leaman bath with hydrazine dihydrochloride as the reducing agent. The kinetic results for the electrochemical deposition of Pt_xRu_1-x were directly applied and the deposition potential was estimated as approximately 0.40 V.     

Engineering extruded collagen fibers for biomedical applications

Extruded collagen fibers constitute a promising biomimetic scaffold for tissue engineering applications. In this study, we compared the structural, thermal, and mechanical properties of fibers produced from either NaCl or poly(ethylene glycol) with a number-average molecular weight of 8000 (PEG 8K), the only two coagents that have been used in the fabrication process. As novel, we report the fabrication of fibers with properties similar to native or synthetic fibers using other coagents. NaCl derived fibers were characterized by higher thermal stability (p < 0.026), stress (p < 0.001), and modulus (p < 0.0025) values than PEG 8K, whereas the latter yielded more extendable fibers (p < 0.012). Poly(ethylene glycol)s with number-average molecular weights of 200 and 1000 produced fibers with similar mechanical properties (p > 0.05) that were thinner (p < 0.033), stiffer (p < 0.022), and less extendable (p < 0.0002) than those of PEG 8K. Poly(vinyl alcohol) (PVA) with a number-average average molecular weight of 9–10,000 and PEG 8K yielded fibers with similar diameters and stress-at-break values (p > 0.05); however, the poly(ethylene glycol) derived fibers were more extendable (p < 0.0003), whereas the PVA fibers were stiffer (p < 0.029). Gum-arabic- and soluble-starch-derived fibers were of similar tensile strength, extendibility, and stiffness (p > 0.05). In this in vitro study, the thickest (p < 0.011) and the weakest (p < 0.0066) fibers were produced in the presence of sodium sulfate. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

On the effectiveness of early life cycle defect prediction with Bayesian Nets

Standard practice in building models in software engineering normally involves three steps: collecting domain knowledge (previous results, expert knowledge); building a skeleton of the model based on step 1 including as yet unknown parameters; estimating the model parameters using historical data. Our experience shows that it is extremely difficult to obtain reliable data of the required granularity, or of the required volume with which we could later generalize our conclusions. Therefore, in searching for a method for building a model we cannot consider methods requiring large volumes of data. This paper discusses an experiment to develop a causal model (Bayesian net) for predicting the number of residual defects that are likely to be found during independent testing or operational usage. The approach supports (1) and (2), does not require (3), yet still makes accurate defect predictions (an R ² of 0.93 between predicted and actual defects). Since our method does not require detailed domain knowledge it can be applied very early in the process life cycle. The model incorporates a set of quantitative and qualitative factors describing a project and its development process, which are inputs to the model. The model variables, as well as the relationships between them, were identified as part of a major collaborative project. A dataset, elicited from 31 completed software projects in the consumer electronics industry, was gathered using a questionnaire distributed to managers of recent projects. We used this dataset to validate the model by analyzing several popular evaluation measures (R ², measures based on the relative error and Pred). The validation results also confirm the need for using the qualitative factors in the model. The dataset may be of interest to other researchers evaluating models with similar aims. Based on some typical scenarios we demonstrate how the model can be used for better decision support in operational environments. We also performed sensitivity analysis in which we identified the most influential variables on the number of residual defects. This showed that the project size, scale of distributed communication and the project complexity cause the most of variation in number of defects in our model. We make both the dataset and causal model available for research use.