High-temperature hydrogen sulfide corrosion on the heat-affected zone of the AISI 444 stainless steel caused by Venezuelan heavy petroleum

The aim of this study was to evaluate the effect of welding on the corrosion resistance of the heat-affected zone (HAZ) of the AISI 444 ferritic stainless steel in medium containing Venezuelan heavy oil. AISI 444 steel plates were welded through the use of three levels of welding heat input (4, 6 and 8 kJ/cm). Samples were extracted from the welded plates and thermally treated in three different temperatures (200, 300 e 400 °C), while immerged in petroleum for a period of 4 h. Optical microscopy (OM), scanning electronic microscopy (SEM) and energy dispersive X-ray analysis (EDX) techniques were used for the analysis of the surface and transversal section of the joint. Electrochemical trials of cyclic potentiokinetic reactivation of double loop (EPR-DL) were also carried out. It has been concluded that the temperature of treatment has direct influence on the level of material corrosion and that the increase in the welding heat input contributes to a higher level of corrosion.     

Dispersion characteristics of asymmetric coupled anisotropic dielectric waveguides using FDFD

The formulation is developed in the frequency domain and the finite difference method is used for the numerical solution of the scalar wave equation, written in terms of the transverse components of the magnetic field. As a result a conventional eigenvalue problem is obtained without the presence of spurious modes due to the implicit inclusion of the divergence of the magnetic field equal to zero. The formulation is developed to include biaxial anisotropic dielectrics with an index profile varying arbitrarily in the cross section of the waveguide under analysis. This formulation is then applied to the analysis of the influence on the dispersion characteristics of the dimensions of asymmetric coupled rectangular uniaxial anisotropic dielectric waveguides. As expected, the reduction of the height or the width of one of the rectangular dielectric waveguides causes the dispersion curves to move towards higher frequencies.     

Primal-dual approximation algorithms for the Prize-Collecting Steiner Tree Problem

The primal-dual scheme has been used to provide approximation algorithms for many problems. Goemans and Williamson gave a (2−1/(n−1))-approximation for the Prize-Collecting Steiner Tree Problem that runs in O(n³logn) time—it applies the primal-dual scheme once for each of the n vertices of the graph. We present a primal-dual algorithm that runs in O(n²logn), as it applies this scheme only once, and achieves the slightly better ratio of (2−2/n). We also show a tight example for the analysis of the algorithm and discuss briefly a couple of other algorithms described in the literature.     

Exhaust emissions and electric energy generation in a stationary engine using blends of diesel and soybean biodiesel

The present work describes an experimental investigation concerning the electric energy generation using blends of diesel and soybean biodiesel. The soybean biodiesel was produced by a transesterification process of the soybean oil using methanol in the presence of a catalyst (KOH). The properties (density, flash point, viscosity, pour point, cetane index, copper strip corrosion, conradson carbon residue and ash content) of the diesel and soybean biodiesel were determined. The exhaust emissions of gases (CO, CO₂,C_xH_y,O₂, NO, NO_x and SO₂) were also measured. The results show that for all the mixtures tested, the electric energy generation was assured without problems. It has also been observed that the emissions of CO, C_xH_y and SO₂ decrease in the case of diesel–soybean biodiesel blends. The temperatures of the exhaust gases and the emissions of NO and NO_x are similar to or less than those of diesel.     

Characterization of the Main Semiconductor Laser Static and Dynamic Working Parameters From CW Optical Spectrum Measurements

We present a complete characterization of the work parameters of several types of semiconductor lasers. Static parameters as: power, linewidth and linewidth enhancement factor and also dynamic parameters such as: relaxation oscillations, relative intensity noise and damping rates are calculated using measurements of the optical spectrum of the lasers operated in continuous-wave mode. Methods for the calculation of these parameters are described and applied to the lasers under test by means of a single general setup and a single set of measurements     

On what we cannot learn from proximity data.

Different issues raised in the commentaries are elaborated in this reply. The focus was on the following five topics: (a) the nature of storage deficits in the patient groups and the different meanings that can be attached to it, (b) the possible explanations for the disordered responses of the patients, (c) suggestions for the use of other techniques to study semantic deficits, (d) the Warrington and Shallice criteria to distinguish between access and storage problems, and (e) some technical (statistical) issues raised in the commentaries. The reply concludes by highlighting the key findings reported in the target article that seem to be accepted by the large majority of the commentators. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Comparison of the effectiveness of four linearizing techniques used in SiGe HBT LNA at 1900 MHz and low-bias voltage

In this article, four linearizing techniques are compared with each other when they are used in a common-emitter SiGe HBT LNA. Finally, when all of them are employed together, improved linearity of the LNA is observed and more than 10 dBm of IIP3 and −5 dBm of 1-dB gain input compression point are realized when the circuit is fed with 2.4 V. © 2004 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14, 144–152, 2004.     

Role of Bioflocculation on Chemical Oxygen Demand Removal in Solids Contact Chamber of Trickling Filter/Solids Contact Process

The trickling filter/solids contact (TF/SC) process was developed in the late 1970s to improve the quality of the final effluent from existing trickling filter plants, to be able to meet stricter Environmental Protection Agency effluent requirements. Although this process has successfully achieved this objective, it is still not completely understood, there is limited information regarding the flocculation phenomena occurring in the solids contact chamber (SCC), and no information could be found on the relationship between flocculation and organic matter removal kinetics. To better understand the kinetics of biological flocculation in a continuous flow SCC, a long-term experimental program was conducted using a TF/SC pilot plant constructed at the Marrero, La., wastewater treatment plant. This program started in January 1998 and has continued through date. The present article will focus on two major areas: (1) the kinetics of bioflocculation in the SCC; and (2) effect of bioflocculation on chemical oxygen demand (COD) removal. Analysis of the wastewater composition revealed that, on the average, only 18.7% of the total COD in the SCC influent is truly dissolved. Therefore, most of the total COD removal observed in the SCC must be due to a physical process, such as flocculation. The experimental data confirmed that flocculation of the particulate COD contained in the trickling filter effluent explains the high total COD removal observed at the SCC. Both total and colloidal COD removals are well explained by the first-order flocculation model.     

The multiscale hermite transform for local orientation analysis.

The efficient representation of local differential structure at various resolutions has been a matter of great interest for adaptive image processing and computer vision tasks. In this paper, we derive a multiscale model to represent natural images based on the scale-space representation: a model that has an inspiration in the human visual system. We first derive the one-dimensional case and then extend the results to two and three dimensions. The operators obtained for analysis and synthesis stages are derivatives of the Gaussian smoothing kernel, so that, for the two-dimensional case, we can represent them either in a rotated coordinate system or in terms of directional derivatives. The method to perform the rotation is efficient because it is implemented by means of the application of the so-called generalized binomial filters. Such a family of discrete sequences fulfills a number of properties that allows estimating the local orientation for several image structures. We also define the discrete counterpart in which the coordinate normalization of the continuous case is approximated as a subsampling of the discrete domain.