A study on dynamic friction of different spun yarns

This article presents the results from a study of yarn-to-yarn (YY) and yarn-to-metal (YM) frictions conducted on ring, rotor, air-jet, and open-end friction (OE friction) spun yarns at different relative speeds and input tensions. The results indicate that the behavior of frictions for YY is different than that of YM. In case of YY friction, OE friction yarn shows maximum friction followed by rotor, air-jet, and ring spun yarns; however, a reverse order is noticed for YM friction. The relative speed and input tension have significant influence on the frictional behavior of spun yarns. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Topographic variation in biglycan and decorin synthesis by articular cartilage in the early stages of osteoarthritis: an experimental study in sheep

From October 1988 to January 1992, nine isolates of Pseudomonas aeruginosa carrying transferable plasmids encoding imipenem-hydrolyzing beta-lactamase (pI = c. 9.5) were recovered from nine different patients in a neurosurgical ward of a hospital in Japan. The beta-lactamase activities of the sonicated extracts from the transconjugants were inhibited by EDTA and this was partially reversible by the addition of zinc cation. The substrate specificity and pI of the beta-lactamase were similar to those of the metallo beta-lactamases from P. aeruginosa and Serratia marcescens TN9106. All strains were resistant to imipenem, carbenicillin and antipseudomonal cephems including ceftazidime, cefsulodin, cefpirome, while four and five strains were susceptible to piperacillin and aztreonam, respectively. Both low level imipenem resistance and high level cephem resistance were co-transferred with the production of metallo beta-lactamase, while resistance to piperacillin, aztreonam, and high level imipenem-resistance were not selected. Production of chromosomal cephalosporinase in piperacillin resistant strains was derepressed, and production of outer membrane protein of D2 was diminished in highly imipenem resistant strains. Six strains were isolated in 1991, and the amounts of antipseudomonal agents, especially imipenem, used in the neurosurgical ward increased markedly in this year. Only three of the nine isolates had the same serotype, pyocin type and phage type. Our results suggest that the repeated isolation of imipenem and cephem-resistant P. aeruginosa producing metallo beta-lactamase was related to the high usage of antipseudomonal beta-lactam antibiotics such as imipenem, and was exacerbated by the dissemination of a plasmid.     

Enumeration of minimal cutsets from matrix representation of directed/undirected networks

This paper describes an algorithm for finding the minimal cutsets between a specified source and terminal nodes of directed/undirected networks. Adjacent nodes of a source node/merged node are determined by the collection of node numbers of columns corresponding to non-zero elements of the first row of the adjacency matrix to form the reduced adjacency matrix (RAM) corresponding to merged nodes. Connectivity of RAM has been checked to obtain the minimal cutsets.     

Premature separation of centromere and aneuploidy: an indicator of high risk in unaffected individuals from familial breast cancer families?

OBJECTIVES: Injury is the leading cause of death in the male working population of Brazil. An important fraction of these deaths are work related. Very few cohort studies of steel workers, and none from developing countries, have reported on mortality from injuries. This paper analyses mortality from work and non-work related injuries among Brazilian steel workers. METHODS: Deaths during employment from 1 January 1977 to 30 November 1992 were analysed in a cohort of 21,816 male steel workers. Mortality rates specific for age and calendar year among the workers were compared with those of the male population of the state where the plant is located. Work related injuries were analysed by comparing the mortality rates for different subgroups of the cohort. RESULTS: The number of deaths (391) was less than half that expected based on death rates of the general population. Over 60% (242) of deaths were due to injuries. Mortality from most causes was substantially below that in the general population, but that from unintentional injury, was 50% above that of the general population. Standardised mortality ratios (SMRs) were highest for the youngest and the oldest employees and for labourers and clerical workers. Mortality from motor vehicle injury was twice that expected from population rates (SMR = 209, 95% confidence interval (95% CI) 176-244). There was a 67% fall in the age adjusted mortality from occupational injuries in the study period. CONCLUSION: The healthy worker effect in this cohort was greater than that commonly found in studies of occupational groups in developed countries, probably because of a greater socioeconomic gap between employed and unemployed populations in Brazil, and unequal distribution of health care resources. Mortality was especially high for motor vehicle injuries. The fall in mortality from occupational injuries during the study period was probably due to improvement in safety standards, increased automation, and better medical care. There is a need to investigate risk factors for unintentional injuries among steel workers, especially those due to motor vehicle injuries. Prevention of occupational and nonoccupational injuries should be a main priority in Brazil.     

Evaluation of the anisotropic Green's function in three dimensional elasticity

A perturbation expansion technique for approximating the three dimensional anisotropic elastic Green's function is presented. The method employs the usual series for the matrix (I–A)^-1 to obtain an expansion in which the zeroth order term is an isotropic fundamental solution. The higher order contributions are expressed as contour integrals of matrix products, and can be directly evaluated with a symbolic manipulation program. A convergence condition is established for cubic crystals, and it is shown that convergence is enhanced by employing Voigt averaged isotropic constants to define the expansion point. Example calculations demonstrate that, for moderately anisotropic materials, employing the first few terms in the series provides an accurate solution and a fast computational algorithm. However, for strongly anisotropic solids, this approach will most likely not be competitive with the Wilson-Cruse interpolation algorithm.This research was sponsored by the Exploratory Studies Program of Oak Ridge National Laboratory and the Division of Materials Science, U. S. Department of Energy, under contract DE-AC05-84OR21400 with Lockheed Martin Energy Systems, Inc.     

HotSpot: a compact thermal modeling methodology for early-stage VLSI design

This paper presents HotSpot-a modeling methodology for developing compact thermal models based on the popular stacked-layer packaging scheme in modern very large-scale integration systems. In addition to modeling silicon and packaging layers, HotSpot includes a high-level on-chip interconnect self-heating power and thermal model such that the thermal impacts on interconnects can also be considered during early design stages. The HotSpot compact thermal modeling approach is especially well suited for preregister transfer level (RTL) and presynthesis thermal analysis and is able to provide detailed static and transient temperature information across the die and the package, as it is also computationally efficient.     

A brief review of the ionic conductivity enhancement for selected oxide electrolytes

The advantages of lowering the operation temperature of SOFCs have attracted great interest worldwide. One of the major barriers to decreasing the operation temperature is the ohmic loss of the electrolyte. Maximizing the electrolyte ionic conductivity is of significant importance, especially in the absence of new electrolyte materials. The ionic conductivity of electrolytes can be influenced by many parameters. There has been an enormous effort in the literature for the improvement of the electrolyte ionic conductivity. From a practical point of view, this paper reviews various approaches to enhancing the ionic conductivity of polycrystalline zirconia- and ceria-based oxide electrolytes in the light of composition, microstructure, and processing. Suggestions are given for future work.     

Silicon oxide thin films prepared by a photo-chemical vapour deposition technique

Wide band gap a-SiO_x:H films have been prepared by the photochemical decomposition of a SiH₄, CO₂ and H₂ gas mixture. Deposition parameters namely the CO₂ to SiH₄ gas flow ratio, H₂ dilution and chamber pressure were optimized in order to achieve highly photoconducting (1 × 10^-6 S cm^-1) films with an optical gap of 1.99 eV. The optical gap was found to increase with an increase in the CO₂ to SiH₄ flow ratio. A decrease in the photoconductivity, refractive index, spin g-value and a simultaneous increase in the spin density are attributed to an incorporation of oxygen into the films. Upon hydrogen dilution the photoconductivity of a-SiO_x:H films was observed to improve along with an increase of the optical gap. The spin density of a-SiO_x:H films was of the order of 10¹⁷ cm^-9. The optoelectronic properties of the films have been correlated with the bonding configurations in the film, deposition parameters and the growth kinetics. This revised version was published online in November 2006 with corrections to the Cover Date.