Physical and mechanical characterization of phyllites and metagreywackes in central Portugal

This work defines the physical and mechanical characteristics of phyllites and metagreywackes belonging to a schist–greywacke complex in central Portugal. The index properties, point load strength, uniaxial compressive strength, slake durability and Schmidt rebound hardness were determined. In general, the metagreywackes gave a higher strength than phyllites with the same weathering degree. Possible correlations and estimation models were established and compared with the equations obtained by different researchers.     

Emission operational strategy for combined cooling,heating, and power systems

Integrated Energy Systems (IES), as technology that use thermal activated components to recover waste heat, are energy systems that offer key solution to global warming and energy security through high overall energy efficiency and better fuel use. Combined Cooling, Heating, and Power (CCHP) Systems are IES that use recovered thermal energy from the prime mover to produce heating and cooling for the building. The CCHP operational strategy is critical and it has to be considered in a well designed system since it defines the ultimate goal for the benefits expected from the system. One of the most common operational strategies is the cost-oriented strategy, which allows the system to operate at the lowest cost. A primary energy strategy (PES) optimizes energy consumption instead of cost. However, as a result of the worldwide concern about global warming, projects that target reduction of greenhouse gas (GHG) emissions have gained a lot of interest. Therefore, for a CCHP system, an emission strategy (ES) would be an operational strategy oriented to minimize emission of pollutants. In this study, the use of an ES is proposed for CCHP systems targeted to reduce emission of pollutants. The primary energy consumption (PEC) reduction and carbon dioxide (CO₂) emission reduction obtained using the proposed ES are compared with results obtained from the use of a PES. Results show that lower emission of CO₂ is achieved with the ES when compared with the PES, which prove the advantage of the ES for the design of CCHP systems targeted to emissions reduction.     

Structured literature image finder: Parsing text and figures in biomedical literature

The SLIF project combines text-mining and image processing to extract structured information from biomedical literature.SLIF extracts images and their captions from published papers. The captions are automatically parsed for relevant biological entities (protein and cell type names), while the images are classified according to their type (e.g., micrograph or gel). Fluorescence microscopy images are further processed and classified according to the depicted subcellular localization.The results of this process can be queried online using either a user-friendly web-interface or an XML-based web-service. As an alternative to the targeted query paradigm, SLIF also supports browsing the collection based on latent topic models which are derived from both the annotated text and the image data.The SLIF web application, as well as labeled datasets used for training system components, is publicly available at http://slif.cbi.cmu.edu.     

Time-varying discrete-time linear systems with bounded rates of variation: Stability analysis and control design

This paper investigates the problems of robust stability analysis and state feedback control design for discrete-time linear systems with time-varying parameters. It is assumed that the time-varying parameters lie inside a polytopic domain and have known bounds on their rate of variation. A convex model is proposed to represent the parameters and their variations as a polytope and linear matrix inequality relaxations that take into account the bounds on the rates of parameter variations are proposed. A feasible solution provides a parameter-dependent Lyapunov function with polynomial dependence on the parameters assuring the robust stability of this class of systems. Extensions to deal with robust control design as well as gain-scheduling by state feedback are also provided in terms of linear matrix inequalities. Numerical examples illustrate the results.     

Performance Evaluation of a Zero-Fouling Reciprocating Scraped-Surface Heat Exchanger

An innovative self-cleaning shell-and-tube heat exchanger is presented. Inside each interior tube (through which the product flows) a scraping rod is fitted. This rod moves in reciprocal manner and the scraping elements mounted on the rod fully clean the tube wall surface. Additionally, the macroscopic displacements of the flow, induced by the insert device motion, promote high flow mixing. Consequently, tube-side heat transfer coefficients are enhanced. Thermal-hydraulic and scraping power measurements are performed in laminar regime for motionless and dynamic conditions. An extended performance evaluation criterion is proposed, in order to balance the augmentation of heat transfer and the increased power consumption (pumping and scraping power) of the device. This study allows stating guidelines for the operation of the device, concluding that the performance of the heat exchanger is irrespective of the velocity ratio. The scraper can be used intermittently, or at the minimum scraping frequency that ensures fouling mitigation.     

Iron determination by FAAS in fish feed and feces after ultrasound-assisted extraction

This paper proposes a method to determine iron in samples of fish feed and feces using ultrasound in the extraction of the analyte and in subsequent quantification by flame atomic absorption spectrometry. Using HCl 0.10 mol L⁻¹ as the extraction solution, the optimal conditions of extraction were found to be: granulometry of the sample <60 μm; a sonication time of five cycles of 10 s and sonication power of 136 W. The method was applied in studies of the availability of iron in four food sources used in the diet of Nile Tilapia. The results obtained with the proposed extraction method allowed us to calculate the coefficients of apparent digestibility of iron in the food sources, which was not possible when using results obtained from samples mineralized by acid digestion.     

Raman analysis of surimi gelation by addition of wheat dietary fibre

Raman analysis has been carried out to study the effects of Vitacel^® wheat dietary fibre (WDF) during gelation of surimi. The main results reveal the following: (a) Vitacel^® comprises natural cellulose I as major component; (b) hydration of WDF leads to νCH frequency upshifting and decreasing intensity. On the basis of these spectral features it is suggested that water transfer from protein to WDF can occur in surimi gels. WDF hydration can be interpreted in the sense that this fibre either takes water that is delivered from the gel protein upon heat-mediated formation of β-sheets and hydrophobic contacts and/or or acts as an active dehydrating agent. An increase of solvent-exposed hydrophobic side chains is observed in the sol phase, upon the addition of WDF, which may cause breaking of intermolecular protein hydrophobic contacts; a subsequent change upon WDF-containing gel formation is the reduction in the νCH intensity, which may be indicative of increasing hydrophobic WDF-protein contacts. Interestingly, these results constitute molecular data, to be considered when designing restructured fish products with these fibre ingredients.     

ISO 9001 certification in the American Continent: a statistical analysis and modelling

The ISO 9001 standard is considered as an effective tool to support a quality management system (QMS). A steady growth in the number of ISO 9001 issued certificates is observed worldwide, confirming the interest of companies in this approach. However, information regarding this behaviour over time in the American Continent is scarce. This paper presents a set of qualitative and quantitative analyses related to the ISO 9001 certification (globally and at the country level of the Americas), the use of this standard in countries that were part of the ISO Survey 2011 and modelling the ISO 9001 certification for American countries, in order to characterise through mathematical models, the evolution of the certification process and to identify factors that influence the ISO 9001 issued certificates in the various countries analysed. Based on the work developed, a positive relationship was found between the number of issued certificates in each country per 1000 inhabitants and the indicators of economic development (Gross National Income Per Capita). It is determined that the total reserves of a country is an economic variable that directly affects the number of issued certificates, a finding not observed in other forecasting models.     

Generation of classification trees from variable weighted features

Trees are a useful framework for classifying entities whose attributes are, at least partially, related through a common ancestry, such as species of organisms, family members or languages. In some common applications, such as phylogenetic trees based on DNA sequences, relatedness can be inferred from the statistical analysis of unweighted attributes. The vast majority of mutations that survive across generations are evolutionarily neutral, which means that most genetic differences between species will have accumulated independently and randomly. In these cases, it is possible to calculate the tree from a precomputed matrix of distances. In other cases, such as with anatomical traits or languages, the assumption of random and independent differences does not hold, making it necessary to consider some traits to be more relevant than others for determining how related two entities are. In this paper, we present a constraint programming approach that can enforce consistency between bounds on the relative weight of each trait and tree topologies, so that the user can best determine which sets of traits to use and how the entities are likely to be related.