Robot arm reaching through neural inversions and reinforcement learning

We present a neural method that computes the inverse kinematics of any kind of robot manipulators, both redundant and non-redundant. Inverse kinematics solutions are obtained through the inversion of a neural network that has been previously trained to approximate the manipulator forward kinematics. The inversion provides difference vectors in the joint space from difference vectors in the workspace. Our differential inverse kinematics (DIV) approach can be viewed as a neural network implementation of the Jacobian transpose method for arm kinematic control that does not require previous knowledge of the arm forward kinematics. Redundancy can be exploited to obtain a special inverse kinematic solution that meets a particular constraint (e.g. joint limit avoidance) by inverting an additional neural network The usefulness of our DIV approach is further illustrated with sensor-based multilink manipulators that learn collision-free reaching motions in unknown environments. For this task, the neural controller has two modules: a reinforcement-based action generator (AG) and a DIV module that computes goal vectors in the joint space. The actions given by the AG are interpreted with regard to those goal vectors.     

3D posture estimation using geodesic distance maps

This paper presents a novel technique for three-dimensional (3D) human motion capture using a set of two non-calibrated cameras. The user’s five extremities (head, hands and feet) are extracted, labeled and tracked after silhouette segmentation. As they are the minimal number of points that can be used in order to enable whole body gestural interaction, we will henceforth refer to these features as crucial points. Features are subsequently labelled using 3D triangulation and inter-image tracking. The crucial point candidates are defined as the local maxima of the geodesic distance with respect to the center of gravity of the actor region that lie on the silhouette boundary. Due to its low computational complexity, the system can run at real-time paces on standard personal computers, with an average error rate range between 4% and 9% in realistic situations, depending on the context and segmentation quality.

Guidance of a mobile robot using an array of static cameras located in the environment

This paper presents a new proposal for positioning and guiding mobile robots in indoor environments. The proposal is based on the information provided by static cameras located in the movement environment. This proposal falls within the scope of what are known as intelligent environments; in this case, the environment is provided with cameras that, once calibrated, allow the position of the robots to be obtained. Based on this information, control orders for the robots can be generated using a radio frequency link. In order to facilitate identification of the robots, even under extremely adverse ambient lighting conditions, a beacon consisting of four circular elements constructed from infrared diodes is mounted on board the robots. In order to identify the beacon, an edge detection process is carried out. This is followed by a process that, based on the algebraic distance, obtains the estimated ellipses associated with each element of the beacon. Once the beacon has been identified, the coordinates of the centroids for the elements that make up the beacon are obtained on the various image planes. Based on these coordinates, an algorithm is proposed that takes into account the standard deviation of the error produced in the various cameras in ascertaining the coordinates of the beacon’s elements. An odometric system is also used in guidance that, in conjunction with a Kalman Filter, allows the position of the robot to be estimated during the time intervals required to process the visual information provided by the cameras.

Characteristics of WWTP sludge after drying in greenhouse for agricultural purposes

The sludge generated by sewage treatment which meets regulatory standards can be used in agriculture. With this understanding, the focus of this study is the evaluation of the agricultural characteristics and inorganic substances in excess activated sludge, which was subjected to drying in a greenhouse. The variables (factor) evaluated during the drying process were: type of sludge (digested or not digested), addition of lime to the sludge, and the physical layout and rotation of sludge in the greenhouse. The parameters monitored for this assessment were moisture, volatile solids and pH. The greenhouse cover and sides were made of translucent plastic to allow the penetration of solar radiation and prevent water from entering. A impermeable floor was used. The sludge was generated in sewage treatment plants located in the metropolitan region of Grande Vitória, Espírito Santo, Brazil. The solar drying of wastewater sludge in a greenhouse presented satisfactory results.     

An upper bound for the distance between a zero and a critical point of a solution of a second order linear differential equation

This paper presents an upper bound for the distance between a zero and a critical point of a solution of the second order linear differential equation (p(x)y^′)^′+q(x)y(x)=0, with p(x),q(x)>0. It also compares it with previous results.     

Robot task plan representation by Petri nets: modelling, identification, analysis and execution

In this paper we introduce a framework to represent robot task plans based on Petri nets. Our approach enables modelling a robot task, analysing its qualitative and quantitative properties and using the Petri net representation for actual plan execution. The overall model is obtained from the composition of simple models, leading to a modular approach. Analysis is applied to a closed loop between the robot controller and the environment Petri net models. We focus here on the quantitative properties, captured by stochastic Petri net models. Furthermore, we introduce a method to identify the environment and action layer parameters of the stochastic Petri net models from real data, improving the significance of the model. The framework building blocks and a single-robot task model are detailed. Results of a case study with simulated soccer robots show the ability of the framework to provide a systematic modelling tool, and of determining, through well-known analysis methods for stochastic Petri nets, relevant properties of the task plan applied to a particular environment.     

An agent-based genetic algorithm for hybrid flowshops with sequence dependent setup times to minimise makespan

This paper deals with a variant of flowshop scheduling, namely, the hybrid or flexible flowshop with sequence dependent setup times. This type of flowshop is frequently used in the batch production industry and helps reduce the gap between research and operational use. This scheduling problem is NP-hard and solutions for large problems are based on non-exact methods. An improved genetic algorithm (GA) based on software agent design to minimise the makespan is presented. The paper proposes using an inherent characteristic of software agents to create a new perspective in GA design. To verify the developed metaheuristic, computational experiments are conducted on a well-known benchmark problem dataset. The experimental results show that the proposed metaheuristic outperforms some of the well-known methods and the state-of-art algorithms on the same benchmark problem dataset.     

Standardized code quality benchmarking for improving software maintainability

We provide an overview of the approach developed by the Software Improvement Group for code analysis and quality consulting focused on software maintainability. The approach uses a standardized measurement model based on the ISO/IEC 9126 definition of maintainability and source code metrics. Procedural standardization in evaluation projects further enhances the comparability of results. Individual assessments are stored in a repository that allows any system at hand to be compared to the industry-wide state of the art in code quality and maintainability. When a minimum level of software maintainability is reached, the certification body of TüV Informationstechnik GmbH issues a Trusted Product Maintainability certificate for the software product.     

Non‐linear analysis of shells with arbitrary evolving cracks using XFEM

A new formulation and numerical procedures are developed for the analysis of arbitrary crack propagation in shells using the extended finite element method. The method is valid for completely non‐linear problems. Through‐the‐thickness cracks in sandwich shells are considered. An exact shell kinematics is presented, and a new enrichment of the rotation field is proposed which satisfies the director inextensibility condition. To avoid locking, an enhanced strain formulation is proposed for the 4‐node cracked shell element. A finite strain plane stress constitutive model based on the logarithmic corotational rate is employed. A cohesive zone model is introduced which embodies the special characteristics of the shell kinematics. Stress intensity factors are calculated for selected problems and crack propagation problems are solved. Copyright © 2004 John Wiley & Sons, Ltd.