UTRA/FDD RF Transceiver Requirements

Unified RF requirements are derived for an UMTS Terrestrial RadioAccess/Frequency Division Duplex (UTRA/FDD) compliant mobile transceiver. Aset of transceiver requirements are proposed with consideration to systemissues including duplex aspects. From these design-compatible requirements areproposed for each functional block in the transceiver.     

Two Classes of Cosine-Modulated IIR/IIR and IIR/FIR NPR Filter Banks

This paper introduces two classes of cosine-modulated causal and stable filter banks (FBs) with near perfect reconstruction (NPR) and low implementation complexity. Both classes have the same infinite-length impulse response (IIR) analysis FB but different synthesis FBs utilizing IIR and finite-length impulse response (FIR) filters, respectively. The two classes are preferable for different types of specifications. The IIR/FIR FBs are preferred if small phase errors relative to the magnitude error are desired, and vice versa. The paper provides systematic design procedures so that PR can be approximated as closely as desired. It is demonstrated through several examples that the proposed FB classes, depending on the specification, can have a lower implementation complexity compared to existing FIR and IIR cosine-modulated FBs (CMFBs). The price to pay for the reduced complexity is generally an increased delay. Furthermore, two additional attractive features of the proposed FBs are that they are asymmetric in the sense that one of the analysis and synthesis banks has a lower computational complexity compared to the other, which can be beneficial in some applications, and that the number of distinct coefficients is small, which facilitates the design of FBs with large numbers of channels.     

Distributed dynamic load balancing with applications in radio access networks

Managing and balancing load in distributed systems remains a challenging problem in resource management, especially in networked systems where scalability concerns favour distributed and dynamic approaches. Distributed methods can also integrate well with centralised control paradigms if they provide high‐level usage statistics and control interfaces for supporting and deploying centralised policy decisions. We present a general method to compute target values for an arbitrary metric on the local system state and show that autonomous rebalancing actions based on the target values can be used to reliably and robustly improve the balance for metrics based on probabilistic risk estimates. To balance the trade‐off between balancing efficiency and cost, we introduce 2 methods of deriving rebalancing actuations from the computed targets that depend on parameters that directly affects the trade‐off. This enables policy level control of the distributed mechanism based on collected metric statistics from network elements. Evaluation results based on cellular radio access network simulations indicate that load balancing based on probabilistic overload risk metrics provides more robust balancing solutions with fewer handovers compared to a baseline setting based on average load.     

A Large 16*16 IF Analog Switch Matrix for Personal Communications Satellites

A 16 input and 16 output channels single chip intermediate frequency range (160 MHz) analog switch matrix for personal communication satellites has been designed and processed by using a commercial 1.2 µm BiCMOS technology. The circuit has low power consumption (,2W) and low insertion loss with maximum output power of 0 dBm.     

On the formation of porosity and microchannels in growing scales

It is well known that oxide scales develop porosity and microchannels that permit inward transport of molecular species from the ambient gas even under conditions when there is no evidence of cracking of the scales. It is proposed that such porosity and microchannels develop as a result of grain growth and of plastic deformation (grain-boundary sliding, diffusion creep, etc.) under compressive stresses in the scales. The presence of small amounts of impurities enriched at grain boundaries in the scales may greatly affect deformation and mechanical and transport properties in scales.     

The Region 1 & 3 Broadcasting‐Satellite Service Plan after WRC‐03

The 1977 Broadcasting‐Satellite Service (BSS) Plan for Region 1 & 3 had been widely acknowledged to be out‐of‐date by the late 1980s. Development of digital modulation in the early 1990s provided an opportunity to update the technical provisions of the Plan to make it more economically viable. After a decade of work and three World Radiocommunication Conferences (WRCs), the revision of Region 1 & 3 BSS Plan was finally completed in 2003. The new Plan increased channel assignments from 5 to 10 analog‐equivalent channels for each country in Region 1, and from 4 to 12 channels for each country in Region 3. Yet, despite the increase in capacity, the new Plan is surprisingly similar to the original one in terms of the technical parameters. It is still based on national coverage, and the channel plan, orbital location, orbital spacing, and polarization are also the same. As a result, the new Plan is no more economically viable to implement than the old. To create economically viable BSS systems would most likely require modifications to the assignment in the Plan. Yet, modification procedures were made more difficult to apply after replanning. Less future implementation of BSS networks than would otherwise have occurred can be expected, and an inefficient usage of these frequency bands will likely result. On the other hand, less implemented systems will mean more capacity set aside for future use. This is important for countries that currently do not have satellite operations. In the end, BSS replanning reflects the eternal conflict between efficient usage and guaranteed future access. Copyright © 2005 John Wiley & Sons, Ltd.     

Low Power High-Speed Neuron MOS Digital-to-Analog Converters with Minimal Silicon Area

Digital-to-analog converts utilizing neuron MOS-transistors were designed. Different DACs were implemented and characterized in order to compare various topologies. Criteria to select structures were low power, fast performance and minimal silicon area. A basic 8-bit version is implemented with only one neuron MOS-transistor and eight capacitors. The silicon area of this D/A converter is only 0.04 mm² and the power consumption is 8.4 mW with conversion speed of 200 MS/s. An enhanced 8 and 10 bit versions utilizing neuron PMOS transistor and some extra circuitry are also proposed and tested. The silicon area of the enhanced 10 bit circuit is only 0.03mm² while the performance is as good as in the case of the basic version. The measured differential nonlinearity is 0.38 LSB and integral nonlinearity is 0.55 LSB for the enhanced 10 bit structure.     

A study of geohydrological and rock engineering environment at Lappvattnet experimental mine

The paper describes a hydrogeological and geotechnical study of rock mass at an experimental nickel mine at Lappvattnet, Sweden. The mine is situated 30 km south-west of the twonship of Skelleftea and was mainly developed for the exploration purposes. The mine consists of 1000 m of underground roadways from where a number of diamond cored boreholes were drilled for geotechnical studies and mine valuation. The main problem encountered during the development stage of the mine was very high quantities of ground water inflows at relatively high hydraulic pressures. The geological and hydrogeological conditions along the length of the drifts are described together with the methods used for ground-water inflow control. The study shows that there is a strong need for modifying the grouting methods to suit the rock conditions in order to control the ground-water inflows. A discussion regarding the need for a detailed geotechnical investigation prior to the planning and design stage of the project is also included.     

V5.x协议测试系统

首先概述了 V5 .x接口的功能及 V5 .x协议的结构 ,在此基础上 ,详细阐述了在 PC机上实现 V5 TS (V5 .x协议测试系统 )的测试原理及方法。最后 ,通过一个测试举例 ,描述协议消息的传输过程。     

CVD-based tungsten carbide schottky contacts to 6H-SiC for very high-temperature operation

In this study, tungsten carbide, with its hardness, chemical inertness, thermal stability and low resistivity (25 μΩ cm)¹ is shown as a reliable contact material to n- and p-type 6H-SiC for very high temperature applications. WC films with thicknesses of 100–150 nm were deposited by chemical vapor deposition (CVD) from a WF₆/C₃H₈/H₂ mixture at 1173 K. A method to pattern CVD-tungsten carbide is suggested. TEM analysis of as deposited samples displayed a clear and unreacted interface. The electrical investigations of the p-type 6H-SiC Schottky contacts revealed a high rectification ratio and a low reverse current density (6.1 × 10⁻⁵ A cm⁻², −10 V) up to 773 K. On n-type, a low barrier (Φ_Bn=0.79 eV) at room temperature was observed. The low Φ_Bn value suggests WC to be promising as an ohmic contact material on highly doped n-type epi-layers. We will show a temperature dependence for the barrier height of tungsten carbide contacts that can be related to the simultaneous change in the energy bandgap, which should be considered when designing SiC devices intended for high temperature operation.