Monolithically Integrated InP 1 $times$ 16 Optical Switch With Wavelength-Insensitive Operation

The static and dynamic characteristics of a monolithically integrated InP 1$,times,$ 16 optical phased-array switch are presented. The device demonstrates static switching with an average extinction ratio of 18.6 dB, on-chip loss below 7 dB, and wavelength dependence of less than 0.8 dB in the entire $C$-band. A 40-Gb/s nonreturn-to-zero signal is transmitted through the switch with a power penalty below 0.4 dB. Using a programmable electronic circuit, dynamic switching to all 16 outputs is achieved with response times less than 11 ns.      

Mechanisms of Sn Hillock Growth in Vacuum by In Situ Nanoindentation in a Scanning Electron Microscope (SEM)

Nanoindentation is an excellent technique to quantitatively probe the Sn film surface and to introduce controlled compressive stresses. In this work, we have conducted a long-term study of whisker growth in Sn films plated on Cu. In situ indentations were conducted in a scanning electron microscope under vacuum, to elucidate the effect of whiskering without significant oxidation. The evolution of whisker growth up to 1500 h was studied. Measurements of whisker height and width were used to determine the relationship between nodule volume and time. Extensive nodule growth was observed at indentations. Competing mass flow between indentations was observed, with some indentations exhibiting extensive growth, while the growth of others arrested within 100 h. It can be postulated that, when stresses are relieved slowly, hillock heights grow nearly linearly over time. When stress is relieved quickly, a sigmoidal-type curve (arresting growth) is predicted.     

Flexible polyimide-based intracortical electrode arrays with bioactive capability

The promise of advanced neuroprosthetic systems to significantly improve the quality of life for a segment of the deaf, blind, or paralyzed population hinges on the development of an efficacious, and safe, multichannel neural interface for the central nervous system. The candidate implantable device that is to provide such an interface must exceed a host of exacting design parameters. We present a thin-film, polyimide-based, multichannel intracortical Bio-MEMS interface manufactured with standard planar photo-lithographic CMOS-compatible techniques on 4-in silicon wafers. The use of polyimide provides a mechanically flexible substrate which can be manipulated into unique three-dimensional designs. Polyimide also provides an ideal surface for the selective attachment of various important bioactive species onto the device in order to encourage favorable long-term reactions at the tissue-electrode interface. Structures have an integrated polyimide cable providing efficient contact points for a high-density connector. This report details in vivo and in vitro device characterization of the biological, electrical and mechanical properties of these arrays. Results suggest that these arrays could be a candidate device for long-term neural implants.     

Evaluation of alternative evolutionary programming techniques for optimization of an automotive alternator

One of the primary design requirements of automotive generation systems is maximizing power density subject to the constraint of minimizing the overall system cost. However, with the progress made in the reduction of automotive drive train noise, the torque ripple of the generator has been found to be a dominant noise source under idle conditions at high electrical loads. Thus, an added design constraint is the minimization of the torque ripple produced by the machine. In order to evaluate alternative machine designs (and select an optimal), numerical tools are typically applied. In this research, a focus is placed on the creation of numerical tools that can be used to effectively search for an optimal design. A primary tool is an evolutionary algorithm (EA) that has been integrated within a customized magnetic equivalent circuit (MEC) model of the machine. The selection of an EA that is most likely to converge to an optimal solution in the least amount of time is described along with its use in selecting an optimal rotor-pole geometry.     

High performance AlyGa1−yAs-GaAs-lrxGa1−xAs quantum well lasers defined by silicon-oxygen impurity-induced layer disordering

In these experiments impurity-induced layer disordering (IILD) utilizing chemical reduction of SiO₂ by Al (from Al_0.8Ga_0.2As) is employed to generate Si and O to effect layer disordering. The SiO₂-Al_0.8Ga_0.2As reaction is studied with respect to annealing ambient. By controlling the extent of disordering via As₄ overpressure, closely spaced (∼1μm) Si-O IILD buried heterostructure lasers can be optically coupled or uncoupled. Direct observation of O incorporation into the buried layers is shown using secondary ion mass spectroscopy (SIMS). The thermal stability of separate-confinement Al_yGa_1−yAs-GaAs-In_xGa_1−xAs quantum well heterostructure (QWH) laser crystals is investigated using SIMS, transmission electron microscopy (TEM), and photoluminescence (PL) measurements. The data show that the thermal stability of a strained-layer In_0.1Ga_0.9As quantum well (QW) is strongly dependent upon: (1) the layer thickness and heterointerfaces of the Al_yGa_1−yAs-GaAs waveguide layers located directly above and below the QW, (2) the type of surface encapsulant employed, and (3) the annealing ambient. Narrow single-stripe (<2μm) lasers fabricated via Si-O diffusion and layer disordering exhibit low threshold currents (I_th ∼ 4 mA) and differential quantum efficiencies,η, of 22% per facet under continuous (cw) room-temperature operation.     

消费电子主导电源管理开发

追求无止境,这不单是现代人对工作的要求,也是摩登时代时尚人士生活的座右铭.消费者的期望就是商家开发新品的风向标,于是融合多种功能的消费类电子产品层出不穷,而纷繁复杂的电源管理犹如一柄达摩克利斯之剑悬挂在设计工程师的头上.AnalogicTech致力于研发电源管理芯片及其解决方案,将在本刊连续发布其专注于电源方面的见解,有望为众多工程师拨开迷雾,把握电源市场的潮流.     

Use of Remotely Sensed Data for Assessing Forest Stand Conditions in the Eastern United States

The results of three interrelated research activities conducted by Goddard scientists in support of the AgRISTARS Renewable Resources Inventory (RRI) project are summarized. The central theme of the research conducted at Goddard was the development of techniques for the detection, classification, and measurement of forest disturbances using digital, remotely sensed data. Three study areas located in Pennsylvania, North Carolina, and Maine were investigated with respect to: a) the delineation and assessment of forest damage associated with two different forest insect defoliators, and b) an assessment of the improved capabilities to be expected from Landsat Thematic Mapper (TM) data relative to Multispectral Scanner (MSS) data for delineating forest stand characteristics. Key results include the development of a statewide MSS digital data base and associated image processing techniques for accurately delineating (approximately 90 precent correct classification accuracy) insect damaged and healthy forest. Comparison of analyses using MSS and TM Simulator (TMS) data indicated that for broad land cover classes which are spectrally homogeneous, the accuracy of the classification results are similar. However, TMS data provided superior results (20 percent overall accuracy increase relative to MSS results) when detailed (Level III) forest classes were mapped. These studies also illustrated the utility of having at least one band in the visible, near infrared, and middle infrared portion of the electromagnetic spectrum for assessing specific (Level III) forest cover types.     

Reflective color display using thermochromic pigments

A reflective thermochromic display fabricated by a very simple method using three kinds of thermochromic pigments is produced and its thermo-optical characteristics are investigated. The display exhibits maximum red, green, and blue reflectances of 38%, 30%, and 35%, respectively. The reflective display cell shows continuous gray color with changing temperature, which is crucial for multicolor displays. It also shows an excellent viewing angle above 80° without any of the additional optical components that are required in liquid crystal displays. We expect that this display technology will be used for outdoor billboard information display applications.     

Methodology to model the energy and greenhouse gas emissions of electronic software distributions

A new electronic software distribution (ESD) life cycle analysis (LCA) methodology and model structure were constructed to calculate energy consumption and greenhouse gas (GHG) emissions. In order to counteract the use of high level, top-down modeling efforts, and to increase result accuracy, a focus upon device details and data routes was taken. In order to compare ESD to a relevant physical distribution alternative, physical model boundaries and variables were described. The methodology was compiled from the analysis and operational data of a major online store which provides ESD and physical distribution options. The ESD method included the calculation of power consumption of data center server and networking devices. An in-depth method to calculate server efficiency and utilization was also included to account for virtualization and server efficiency features. Internet transfer power consumption was analyzed taking into account the number of data hops and networking devices used. The power consumed by online browsing and downloading was also factored into the model. The embedded CO(2)e of server and networking devices was proportioned to each ESD process. Three U.K.-based ESD scenarios were analyzed using the model which revealed potential CO(2)e savings of 83% when ESD was used over physical distribution. Results also highlighted the importance of server efficiency and utilization methods.