Oxidation resistant ceramic foam from a silicone preceramic polymer/polyurethane blend

Silicon oxycarbide (SiOC) ceramic foams, produced by the pyrolysis of a foamed blend of a methylsilicone preceramic polymer and polyurethane (PU) in a 1/1 wt.% ratio, exhibit excellent physical and mechanical properties. The proposed process allows to easily modify the density and morphology of the foams, making them suitable for several engineering applications. However, it has been shown that, due to residual carbon present in the oxycarbide phase after pyrolysis, the foams are subjected to an oxidation process that reduces their strength after high temperature exposure to air (12 h 1200°C). A modified process, employing the same silicone resin preceramic polymer but a much lower PU content (silicone resin/PU=5.25/1 wt.% ratio), has been developed and is reported in this paper. Microstructural investigations showed that carbon rich regions deriving from the decomposition of the polyurethane template are still present in the SiOC foam, but have a much smaller dimension than those found in foams with a higher PU content. Thermal gravimetric studies performed in air or oxygen showed that the low-PU containing ceramic foams display an excellent oxidation resistance, because the carbon-rich areas are embedded inside the struts or cell walls and are thus protected by the dense silicon oxycarbide matrix surrounding them. SiOC foams obtained with the novel process are capable to maintain their mechanical strength after oxidation treatments at 800 and 1200°C (12 h), while SiOC foams obtained with a higher amount of PU show about a 30% strength decrease after oxidation at 1200°C (12 h).     

Synthesis, fabrication and characterization of poly[3-3′(vinylcarbazole)] (PVK) Langmuir-Schaefer films

Poly[3-3′(vinylcarbazole)] (PVK) was synthetized with N-vinylcarbazole as monomer by oxidative polymerization with ferric chloride. The resulting polymer was then deposited on various solid supports by using Langmuir-Schaefer (LS) method. The pressure-area isotherm of PVK revealed the possibility of compact monolayer formation at air-water interface. Different layers of PVK were doped with iodine vapours. Both scanning probe microscopy and optical microscopy images indicated a good uniformity of the films. The morphology and the thickness of PVK films were investigated using atomic force microscopy. The voltammetric investigation of I₂ doped PVK showed a distinctive electrochemical behaviour. The photoinduced charge transfer across a donor/acceptor (D/A) hybrid interface provided an effective method to study the photoelectrochemical properties of the composite LS films.     

<Superscript>1</Superscript>H NMR characterization of milk lipids: A comparison between cow and buffalo milk

Characterization of the lipid fraction of raw cow and buffalo milk samples, collected in different breeding areas in Apulia, a region of southern Italy, were performed by means of ¹H NMR. The aim of this work was to establish whether FA composition data obtained by ¹H NMR can be used in the differentiation of buffalo and cow milk samples according to species. A complete assignment of the signals present in the spectrum was attempted by COSY, heteronuclear coherence spectra. Quantification of FA was carried out by inserting the integrals of particular peaks in suitable calculations. Multivariate statistical analysis, conducted on the results of the quantification, permitted buffalo and cow milks to be distinguished.     

2-Phenyloxazole-4-carboxamide as a Scaffold for Selective Inhibition of Human Monoamine Oxidase B

A series of 2-phenyloxazoles bearing an amide group at position 4 were designed and synthesized for evaluation as potential inhibitors of human recombinant monoamine oxidases (hrMAOs). Results of kinetics experiments demonstrated that all compounds behave as competitive MAO inhibitors, with good selectivity toward the MAO-B isoform. The most potent and selective derivatives are characterized by inhibition constant (K_i) values in the sub-micromolar range and a good selectivity index (K_{i MAO-A}/K_{i MAO-B}>50). Some derivatives were also found to be able to inhibit MAO activity in nerve growth factor (NGF)-differentiated PC12 cells, taken as a model of neuronal cells. In particular, 2-(2-hydroxyphenyl)-N-phenyloxazole-4-carboxamide (compound 4 a ) may be a promising new scaffold, exerting the highest selectivity and inhibitory effect toward MAOs in NGF-differentiated PC12 cell lysates, without compromising cell viability. Molecular docking analysis allowed a rationalization of the experimentally observed binding affinity and selectivity.     

Characterization of a deswapped triple mutant bovine odorant binding protein

The stability and functionality of GCC-bOBP, a monomeric triple mutant of bovine odorant binding protein, was investigated, in the presence of denaturant and in acidic pH conditions, by both protein and 1-aminoanthracene ligand fluorescence measurements, and compared to that of both bovine and porcine wild type homologues. Complete reversibility of unfolding was observed, though refolding was characterized by hysteresis. Molecular dynamics simulations, performed to detect possible structural changes of the monomeric scaffold related to the presence of the ligand, pointed out the stability of the β-barrel lipocalin scaffold.     

Urolithin as a converging scaffold linking ellagic acid and coumarin analogues: design of potent protein kinase CK2 inhibitors

Casein kinase 2 (CK2) is a ubiquitous, essential, and highly pleiotropic protein kinase; its abnormally high constitutive activity is suspected to underlie its pathogenic potential in neoplasia and other relevant diseases. Previously, using different in silico screening approaches, two potent and selective CK2 inhibitors were identified by our group: ellagic acid, a naturally occurring tannic acid derivative (K(i)=20 nM) and 3,8-dibromo-7-hydroxy-4-methylchromen-2-one (DBC, K(i)=60 nM). Comparing the crystallographic binding modes of both ellagic acid and DBC, an X-ray structure-driven merging approach was taken to design novel CK2 inhibitors with improved target affinity. A urolithin moiety is proposed as a possible bridging scaffold between the two known CK2 inhibitors, ellagic acid and DBC. Optimization of urolithin A as the bridging moiety led to the identification of 4-bromo-3,8-dihydroxy-benzo[c]chromen-6-one as a novel, potent and selective CK2 inhibitor, which shows a K(i) value of 7 nM against the protein kinase, representing a significant improvement in affinity for the target compared with the two parent fragments.     

Electrodeposition of porous Co layers and their conversion to electrocatalysts for methanol oxidation by spontaneous deposition of Pd

Electrocatalysts for methanol oxidation were prepared through a two stage deposition process: porous cobalt layers were deposited, by cathodic reduction of Co²⁺ ions, and then modified by spontaneous deposition of Pd. A basic sulphate solution and a mildly acid chloride solution were compared as media for the electrodeposition of Co. Deposits with the highest surface roughness were obtained in the chloride solution, at large current densities. Pd was deposited onto the Co porous layers by immersing them in acid deaerated PdCl₂ solutions, at open circuit. The Pd loading and the Pd surface area were estimated by UV–visible spectroscopy and by cyclic voltammetry, respectively. The Pd-modified Co electrodes were tested as anodes for methanol oxidation and compared to the similarly prepared Pd-modified Ni electrodes. The former exhibited better stability of performance and higher methanol oxidation peak currents per unit Pd mass, ca. 200 A g⁻¹.     

Thermo-physical properties of as deposited and aged thermal barrier coatings (TBC) for gas turbines: State-of-the art and advanced TBCs

In the perspective of fuelling the future generations of gas turbines by hydrogen rich syngas, the evaluation of the effect of a higher water vapour content into the flue gases on the TBC used, or potentially usable, is a need. For this purpose YPSZ APS TBC with two different microstructures have been exposed for 500?h at different temperatures in the range 1000?°C–1250?°C either in air and air +20% vol. H₂O. The comparison between the different testing conditions has been performed in terms of sintering kinetics and phase stability, as evaluated by thermal diffusivity measurements and Synchrotron X-Rays diffraction, respectively. Furthermore the characterisation of thermal properties of two innovative TBCs (GZO-YPSZ and YAG) potentially able to withstand the CMAS attack and erosive environments, respectively, has been carried out.No clear evidence of a different behaviour of TBC has been observed, at least in the considered aging time and temperature range.