FRP confinement of masonry: analytical modeling

International and National Building Codes provide requirements for design and construction of new masonry structures, but design provisions for the repair, retrofitting, and rehabilitation of masonry structures are not always available and included in the same documents. Due to the extremely large variability in masonry performances, equations of general validity cannot often be provided, namely relationships suitable for every masonry type. Despite the great research effort in the experimental field, considerable theoretical work is still needed to fully outline a definitive analytical model to predict the behavior of FRP confined masonry. Most of the available models, empirical in nature, have been calibrated against their own sets of experimental data, or they are simply derived from concrete. Even if large amount of results obtained for concrete led to consolidated design guidelines, they cannot be simply extended to masonry. In this study, a mechanically based confinement model is proposed based on mechanical parameters able to differentiate similar masonry types and to highlight that they present different confinement performance. Crucial aspects of masonry confinement will be also discussed, namely: lateral dilation; confinement effectiveness; lateral pressure also in non-circular shapes; effective strain of FRP.     

Novel quasi-autothermal hydrogen production process in a fixed-bed using a chemical looping approach: A numerical study

This paper presents a novel quasi-autothermal hydrogen production process. The proposed layout couples a Chemical Looping Combustion (CLC) section and a Steam Methane Reforming (SMR) one. In CLC section, four packed-beds are operated using Ni as oxygen carrier and CH₄ as fuel to continuously produce a hot gaseous mixture of H₂O and CO₂. In SMR section, two fixed-beds filled with Ni-based catalyst convert CH₄ and H₂O into a H₂-rich syngas. Four heat exchangers were employed to recover residual heat content of all the exhaust gas currents. By means of a previously developed 1D numerical model, a dynamic simulation study was carried out to evaluate feasibility of the proposed system in terms of methane conversion (100% circa), hydrogen yield (about 0.65 mol_H2/mol_CH4) and selectivity (about 70%), and syngas ratio (about 2.3 mol_H2/mol_CO). Energetic and environmental analyses of the system performed with respect to conventional steam methane reforming, highlights an energy saving of about 98% and avoided CO₂ emission of about 99%.     

High glass transition temperature polyester coatings for the protection of stones

Copolymers of lactic acid with mandelic or salicylic acid were synthetized through ring‐opening polymerization (ROP) and tested as protective coatings for stones. Most notably, glass transition temperature (T_g), hydrophobicity, and UV barrier properties were increased, making these materials more suitable as protective coating for outdoor stones than poly(lactic acid). A T_g of 76°C was obtained for the alternating copolymer lactic acid/mandelic acid and it was considerably higher than the one of poly(lactic acid) with similar molecular weight (50–55°C). Furthermore, the introduction of a perfluorinated moiety as chain‐end group, using a perfluoro alcohol as initiator of the ROP process, allowed to increase the hydrophobicity and stability of the new coatings. These polymers showed a good protective efficiency when applied on marble stones and preliminary stability tests under solar light showed low degradation, good stability to photo‐oxidative conditions, and negligible color changes after an aging time of 1000 h. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42323.     

Aromatic triblock polymers from natural sources as protective coatings for stone surfaces

Aromatic triblock polymers were synthesized, characterized, and tested as protective coatings for stone surfaces. Syntheses were carried out by a ring opening polymerization process from specifically synthesized monomers ((3S)‐6‐methyl‐3‐phenyl‐1,4‐dioxan‐2,5‐dione or 1,4‐benzodioxepin‐3‐methyl‐2,5‐dione) and a perfluoropolyether diol (Fluorolink D10‐H), as chain initiator. Polymers were characterized through spectroscopic and analytical techniques while their stability under photo‐oxidative conditions was tested using a Solar Box. An excellent stability to environmental conditions was noticed with very low degradation during accelerated aging tests up to 1000 h, as detected by FTIR, molecular weight, DSC and weight loss. Furthermore, these polymers formed an excellent protective coating on the stone surface as shown by capillary water absorption test. Finally, as expected, very stable coatings were obtained as shown by aging tests. The stone surface showed negligible changes of color and a good hydrorepellency confirming a good durability of treatments. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43377.     

Prodynorphin and Proenkephalin in Cerebrospinal Fluid of Sporadic Creutzfeldt–Jakob Disease

Proenkephalin (PENK) and prodynorphin (PDYN) are endogenous opioid peptides mainly produced in the striatum and, to a lesser extent, in the cerebral cortex. Dysregulated metabolism and altered cerebrospinal fluid (CSF) levels of PENK and PDYN have been described in several neurodegenerative diseases. However, no study to date investigated these peptides in the CSF of sporadic Creutzfeldt–Jakob disease (sCJD). Using liquid chromatography-multiple reaction monitoring mass spectrometry, we evaluated the CSF PDYN- and PENK-derived peptide levels in 25 controls and 63 patients with sCJD belonging to the most prevalent molecular subtypes (MM(V)1, VV2 and MV2K). One of the PENK-derived peptides was significantly decreased in each sCJD subtype compared to the controls without a difference among subtypes. Conversely, PDYN-derived peptides were selectively decreased in the CSF of sCJD MV2K, a subtype with a more widespread overall pathology compared to the sCJD MM(V)1 and the VV2 subtypes, which we confirmed by semiquantitative analysis of cortical and striatal neuronal loss and astrocytosis. In sCJD CSF PENK and PDYN were associated with CSF biomarkers of neurodegeneration but not with clinical variables and showed a poor diagnostic performance. CSF PDYN and PENK-derived peptides had no significant diagnostic and prognostic values in sCJD; however, the distinct marker levels between molecular subtypes might help to better understand the basis of phenotypic heterogeneity determined by divergent neuronal targeting.     

Where Are We with RPE Replacement Therapy? A Translational Review from the Ophthalmologist Perspective

The retinal pigmented epithelium (RPE) plays a pivotal role in retinal homeostasis. It is therefore an interesting target to fill the unmet medical need of different retinal diseases, including age-related macular degeneration and Stargardt disease. RPE replacement therapy may use different cellular sources: induced pluripotent stem cells or embryonic stem cells. Cells can be transferred as suspension on a patch with different surgical approaches. Results are promising although based on very limited samples. In this review, we summarize the current progress of RPE replacement and provide a comparative assessment of different published approaches which may become standard of care in the future.     

Gut Microbiota and Short Chain Fatty Acids: Implications in Glucose Homeostasis

Gut microbiota encompasses a wide variety of commensal microorganisms consisting of trillions of bacteria, fungi, and viruses. This microbial population coexists in symbiosis with the host, and related metabolites have profound effects on human health. In this respect, gut microbiota plays a pivotal role in the regulation of metabolic, endocrine, and immune functions. Bacterial metabolites include the short chain fatty acids (SCFAs) acetate (C2), propionate (C3), and butyrate (C4), which are the most abundant SCFAs in the human body and the most abundant anions in the colon. SCFAs are made from fermentation of dietary fiber and resistant starch in the gut. They modulate several metabolic pathways and are involved in obesity, insulin resistance, and type 2 diabetes. Thus, diet might influence gut microbiota composition and activity, SCFAs production, and metabolic effects. In this narrative review, we discuss the relevant research focusing on the relationship between gut microbiota, SCFAs, and glucose metabolism.     

Biosurfactants from Urban Wastes for Detergent Formulation: Surface Activity and Washing Performance

To promote biobased products for industry, six biosurfactants (BS) isolated from green and food urban residues aged under aerobic digestion for 0–60 days were investigated for their chemical composition, surface activity properties and detergent performance in fabric washing in comparison with commercial anionic and nonionic surfactants (CS). The BS exhibited a range of chemical composition and surface activity properties presumably related to their different biomass sources. Surface tension data for these substances correlated meaningfully with performance data in fabric washing. It was found that BS have similar performances as CS when used neat, but the 1:1 w/w BS–CS mixes are characterized by significant synergy. High sensitivity to water hardness and fabric yellowing were found to be the main deficiencies for the BS. However, both effects are minimized or are not critically evident when the BS are used together with CS and/or in common detergents formulations. The results indicate that when used above critical micellar concentration, no significant or critical performance differences are evident within the whole group of BS or between BS and CS. These facts encourage expectations for industrial production and real commercialization of BS as components of detergents formulations.     

Removal of bisphenol A by a nanofiltration membrane in view of drinking water production

The efficiency with which a nanofiltration membrane (Desal 5 DK) removes bisphenol A (BPA) was investigated, together with the mechanisms involved. Whereas high retention (>90%) was obtained at the beginning of the filtration, the observed retention coefficient (R_obs) decreased to around 50% when the membrane became saturated, due to adsorption of BPA onto the membrane structure. The presence of ions (Na⁺, Cl⁻) affects the R_obs, this effect being attributed to a change in BPA hydrodynamic radius. Moreover, in our operating conditions, the presence of natural organic matter (1 mg/L) in the feed solution does not lead to variation in BPA retention at steady state.     

A fuzzy decision tree method for fault classification in the steam generator of a pressurized water reactor

This paper extends a method previously introduced by the authors for building a transparent fault classification algorithm by combining the fuzzy clustering, fuzzy logic and decision trees techniques. The baseline method transforms an opaque, fuzzy clustering-based classification model into a fuzzy logic inference model based on linguistic rules which can be represented by a decision tree formalism. The classification model thereby obtained is transparent in that it allows direct interpretation and inspection of the model. An extension in the procedure for the development of the fuzzy logic inference model is introduced to allow the treatment of more complicated cases, e.g. splitted and overlapping clusters. The corresponding computational tool developed relies on a number of parameters which can be tuned by the user to optimally compromise the level of transparency of the classification process and its efficiency. A numerical application is presented with regards to the fault classification in the Steam Generator of a Pressurized Water Reactor.