Mercury vapor in residential building common areas in communities where mercury is used for cultural purposes versus a reference community

BACKGROUND: Exposure to elemental mercury (Hg0) in residential buildings can occur from accidental spills, broken objects (thermometers, fluorescent fixtures, thermostats), and deliberate introduction, one mode of which involves cultural practices by individuals who believe dispersal of mercury in a residence will bring luck, enhance health or ward off harm. OBJECTIVES: To determine whether mercury vapor levels in common areas of residential buildings is higher in a community where cultural uses are likely (study areas S1, S2) than in a reference community (C1) where cultural use is unlikely, and whether levels can serve as a signal of significant cultural mercury use. METHODS: We monitored Hg0 vapor with a portable spectrophotometer in the three communities. We randomly selected sites in S1 and C1 community, and also include sites in S2 specified by local health officials who suspected cultural mercury use. We evaluated 122 multifamily buildings and 116 outdoor locations. FINDINGS: We found >25 ng/m3 Hg0 in 14% of buildings in study areas compared to only one reference building. In the latter we identified an accidental mercury spill from a bottle that had been brought into the building. Both the mean and maximum indoor mercury vapor levels were greater in the study communities than in the reference community. In all communities, we observed mean indoor Hg0 vapor concentration greater than outdoors, although in two-thirds of buildings, indoor levels did not exceed the area-specific outdoor upper-limit concentration. CONCLUSION: After controlling for factors that might influence Hg0 vapor levels, the most plausible explanation for greater Hg0 levels in the study area is a relationship to cultural use of mercury. None of the measured levels exceeded the ATSDR minimum risk level for residences of 200 ng/m3 Hg0 although levels in living quarters might be greater than those in the common areas.     

Effects of simulated deposition of acid mist and iron ore particulate matter on photosynthesis and the generation of oxidative stress in Schinus terebinthifolius Radii and Sophora tomentosa L

Particulate matter is a natural occurrence in the environment, but some industries, such as the iron ore sector, can raise the total amount of particles in the atmosphere. This industry is primarily a source of iron and sulfur dioxide particulates. The effects of the pollutants from the iron ore industries on representatives of restinga vegetation in a Brazilian coastal ecosystem were investigated using physiological and biochemical measures. Two species, Schinus terebinthifolius and Sophora tomentosa, were exposed to simulated deposition of acid mist and iron ore particulate matter in acrylic chambers in a greenhouse. Parameters such as gas exchange, fluorescence emission, chlorophyll content, total iron content, antioxidant enzyme activity and malondialdehyde content were assessed in order to evaluate the responses of the two species. Neither treatment was capable of inducing oxidative stress in S. terebinthifolius. Nevertheless, the deposition of iron ore particulates on this species increased chlorophyll content, the maximum quantum efficiency of photosystem II and the electron transport rate, while iron content was unaltered. On the other hand, S. tomentosa showed a greater sensitivity to the treatments. Plants of S. tomentosa that were exposed to acid mist had a decrease in photosynthesis, while the deposition of iron particulate matter led to an increase in iron content and membrane permeability of the leaves. The activities of antioxidant enzymes, such as catalases and superoxide dismutase, were enhanced by both treatments. The results suggested that the two restinga species use different strategies to overcome the stressful conditions created by the deposition of particulate matter, either solid or wet. It seems that while S. terebinthifolius avoided stress, S. tomentosa used antioxidant enzyme systems to partially neutralize oxidative stress. The findings also point to the potential use of S. tomentosa as a biomarker species under field conditions.     

Quantification of fecal coliform inputs to aquatic systems through soil leaching

In order to assess the fecal contamination of rivers in the Seine watershed through soil leaching, 78 small streams located in rural areas were sampled upstream from any wastewater outfall. Culturable fecal coliforms (FC) and beta-D-glucuronidase activity (specific of Escherichia coli) were measured in the samples. Data showed a significant correlation between both estimates of fecal contamination. In the two different areas of the Seine river watershed investigated, most of the small streams were significantly contaminated by fecal bacteria. In general, the streams flowing through areas partly or fully covered with pastures were more contaminated than those flowing through forest and cultivated areas. Rainfall increased the suspended solid content of small streams as well as their fecal contamination, as an important fraction of FC was adsorbed on particles. Calculations showed that, at a large watershed scale, the input of FC in rivers through soil leaching was very low when compared to the input through the discharge of treated domestic wastewater but this could not be true at local scale.     

The effects of meteorological factors on atmospheric bioaerosol concentrations--a review

Over land surfaces a quarter of the total airborne particulate may be made up of biological material in the form of pollen, fungal spores, bacteria, viruses, or fragments of plant and animal matter. Meteorological variables affect the initial release of this material and its dispersal once airborne. Temperature and water availability will affect the size of the source and will control the release of some actively released fungal spores. Inertly released material will become airborne when the drying of the surface reduces bonding forces, and when the material is disrupted by sufficiently strong air movement or by mechanical disturbance. The wind speed necessary to disrupt material is noted to be less on a plant surface than on the ground surface. Measurements of the concentrations of airborne material near dominant sources are reviewed for both area sources, and for point sources such as sewage and waste treatment works, agricultural practices, and diseased animals. The concentration of airborne material remote from sources is considered along with the effects of on and off shore winds and some examples of long distance transport of material. The vertical concentration of bacteria is noted to decline less rapidly than that of fungal spores. The short-term variation of pollen, fungal spore, and bacterial concentrations are also considered.     

现实中的梦想 上海

在所有的通商口岸中,上海是独一无二的,在没有任何构筑物和历史的土地上发展成了一座全新的城市。它也因此成为了一个容纳外国人的梦想和欲望的开放之地。虽然这些梦想的初衷早已被遗忘,却还是存留于已经建成的现实之中。这篇文章思考了它们在城市个性成型过程中的作用。     

Study on transient heat transfer through multilayer thermal insulation: Numerical analysis and experimental investigation

This paper reports on a numerical and experimental study of heat transfer phenomena through two different multilayer fibrous insulations for building applications. The investigated samples were composed of different layers of fibrous materials and aluminium foils, placed between one or two air gaps in the vertical dimension. An experimental apparatus (a guarded hot box) has been used to measure heat transfer through the samples, while a finite volume numerical model combined radiation/conduction heat transfer was developed to predict the temperature distribution and heat transfer in such insulation systems comprised of the materials separated by multiple reflective foils. The model takes into account the coupling between the solid conduction of the fibrous system and the gaseous conduction and radiation. The radiation heat transfer through the insulation system has been modelled via the two flux approximation. The numerical results were compared with the experimental data from the guarded hot box for model validation, as well as to assess the effectiveness of the reflective foils in changing the resistance of the insulations. The comparative verification of the model showed that the numerical results were consistent with the experimental data through the environmental conditions under examination.     

Dissolved silver in European estuarine and coastal waters

Silver is one of the most toxic elements for the marine microbial and invertebrate community. However, little is known about the distribution and behaviour of dissolved silver in marine systems. This paper reports data on dissolved and sediment-associated silver in European estuaries and coastal waters which have been impacted to different extents by past and present anthropogenic inputs. This is the first extended dataset for dissolved silver in European marine waters. Lowest dissolved silver concentrations were observed in the Gullmar Fjord, Sweden (8.9 ± 2.9 pM; x ± 1σ), the Tamar Estuary, UK (9.7 ± 6.2 pM), the Fal Estuary, UK (20.6 ± 8.3 pM), and the Adriatic Sea (21.2 ± 6.8 pM). Enhanced silver concentrations were observed in Atlantic coastal waters receiving untreated sewage effluent from the city of A Cor?na, Spain (243 ± 195 pM), and in the mine-impacted Restronguet Creek, UK (91 ± 71 pM). Anthropogenic wastewater inputs were a source of dissolved silver in the regions studied, with the exception of the Gullmar Fjord. Remobilisation of dissolved silver from historically contaminated sediments, resulting from acid mine drainage or sewage inputs, provided an additional source of dissolved silver to the estuaries. The ranges in the log particle-water partition coefficient (K_d) values of 5-6 were similar for the Tamar and Mero estuaries and agreed with reported values for other estuaries. These high K_d values indicate the particle reactive nature of silver with oxic sediments. In contrast, low K_d values (1.4-2.7) were observed in the Fal system, which may have been due to enhanced benthic inputs of dissolved silver coupled to limited scavenging of silver on to sediments rich in Fe oxide.     

Application of a counter-current gaseous diffusion model to the oxidation of hafnium carbide at 1200 to 1530°C

A counter-current gaseous diffusion model is presented to describe the oxidation of hafnium carbide between 1200 and 1530°C. The model separates the porous hafnia scale into two gas diffusion regions separated by a flame front, where O ₂ and CO react to form CO ₂.In the outer region, O ₂ and CO ₂ counter-diffuse; in the inner region, CO ₂ and CO counter-diffuse. The concentration gradients of each gaseous specie in the pores of the hafnia are determined and the rate of oxidation is calculated. A porosity of 2% and a pore radius of 0.01 m are representative of the values observed in hafnia during the early stages of HfC oxidation. These values lead to predictions of parabolic rate constants that are close to those measured by thermogravimetric analysis. In addition, the predicted and measured parabolic rate constants are shown to have the same dependence upon temperature and oxygen partial pressure.     

Reply to comments on "Derivation of numerical values for the World Health Organization guidelines for recreational waters"

The contribution addressed reveals an optimistic design philosophy likely to systematically underestimate risk in epidemiologic studies into the health effects of bathing water exposures. The authors seem to recommend that data on the 'exposure' measure (i.e. water quality) in such studies should be acquired in a similar manner to that used for regulatory sampling. This approach may compromise the quality of the epidemiologic investigations undertaken. It may result in imprecise estimates of exposure because it ignores the fact that regulatory timescales and spatial resolution (even if artificially compressed to a bathing day) can mask large spatial and temporal variability in water quality. If this variability is ignored by taking some mean value and attributing that to all of those exposed in a period at a study location, many bathers may be misclassified and the studies may be biased to a 'no-effect' conclusion. A more appropriate approach is to maximise the precision of the epidemiologic investigations by measurement of individual exposure (or water quality) at the place and time of the exposure, as has been done in randomised volunteer studies in the UK and Germany. The precise epidemiologic relationships linking 'exposure' with 'illness' can then be related to the probability of exposure to particular water quality by a 'normal bather' using the known probability distribution of the exposure variable (i.e. faecal indicator concentration) in the regulated bathing waters. We suggest that any research protocol where poor sampling design for water quality assessment is justified because regulatory monitoring is equally imprecise may be fundamentally flawed. The rationale for this assessment is that the epidemiology is the starting point and evidence-base for 'standards'. If precision is not maximised at this stage in the process it compromises the credibility of the standards design process. The negative effects of the approach advocated in this 'comment' are illustrated using published research findings used to derive the figures illustrated in Wymer et al. [2005. Comment on derivation of numerical values for the World Health Organization guidelines for recreational waters. Water Research 39, 2774-2777].     

FRACTURE TOUGHNESS OF ORDERED INTERMETALLIC COMPOUNDS FROM SMALL DISKSHAPED SPECIMENS

１　ＩＮＴＲＯＤＵＣＴＩＯＮＣｏｎｖｅｎｔｉｏｎａｌｅｘｐｅｒｉｍｅｎｔａｌｍｅｔｈｏｄｓ,ｓｕｃｈａｓｔｈｅｄｏｕｂｌｅｃａｎｔｉｌｅｖｅｒｂｅａｍ,ｔｈｅｓｉｎｇｌｅｅｄｇｅｎｏｔｃｈｅｄｂｅａｍａｎｄｄｏｕｂｌｅｔｏｒｓｉｏｎｔｅｓｔｓ［１］,ｆｏｒｍｅａｓｕｒｉｎｇｔｈｅｆｒａｃｔｕｒｅｔｏｕｇｈｎｅｓｓｏｆｂｒｉｔｔｌｅａｎｄｓｅｍｉｂｒｉｔｔｌｅｍａｔｅｒｉａｌｓｐｒｏｄｕｃｅｒｅｌｉａｂｌｅｒｅｓｕｌｔｓ,ｂｕｔａｒｅｆａｉｒｌｙｍａｔｅｒｉａｌｓｉｎｔｅｎｓｉｖｅｂｅｃａｕｓ…