Les progrès de la commutation électronique dans le monde (V) Bilan du colloque international de commutation de Florence ISS’84 Première partie

This paper is a technical report of the eleventh international switching symposiumiss’84 of Florence It follows four previous papers, published during the past ten years, and dedicated to essential results of previousiss’s (Munich, Kyoto, Paris and Montreal). It summarizes the evolution of electronic switching along its various aspects, namely: systems, networks, procedures and services.     

Combining hill-placed manure and mineral fertilizer enhances maize productivity and profitability in northern Benin

Throughout much of Sub-Saharan Africa (SSA), maize production is characterized by low productivity due to the scarce availability and use of external inputs and recurrent droughts exacerbated by climate variability. Within the integrated soil fertility management (ISFM) framework, there is thus a need for optimizing the application of fertilizers and manure to better use the limited nutrient resources and increase crop yield and farmer income. An on-station experiment was conducted in Northern Benin over a 4-year period to evaluate the effect of hill placement of mineral fertilizer and manure on maize yields and soil chemical properties. The treatments consisted in the combination of three rates of manure (0 (NM), 3 (3M) and 6 (6M) Mg ha^?1) and three levels of fertilizer (0% (NF), 50% (50F) and 100% (100F) of the rate recommended by extension (76 kg N + 13.1 kg P + 24.9 K ha^?1)). On average across the fertilizer rates, hill-placement of manure significantly improved soil organic carbon content, available P and exchangeable K after 4 years by up to 124, 166 and 77%, respectively, compared to the initial values. As a result of the nutrient inputs and improved soil properties, yields increased steadily over time for all manure and fertilizer combinations. Value-cost ratios and benefit–cost ratios were >2 and generally as good or even better for treatments involving 50F compared to NF or 100F. Although applying half the recommended rate of fertilizer without manure as currently done by many farmers appears to make economic sense, this practice is unlikely to be sustainable in the long term. Substituting 50F for 3M or complementing 50F with 3M are two possible strategies that are compatible with the precepts of ISFM and provide returns on investment at least as good as the current practice. However, this will require greater manure production, made possible in part by the increased stover yields, and access to means of transportation to deliver the manure to the fields.     

A 14-bit 250 kS/s two-step inverter-based incremental $$\varSigma \varDelta$$ ADC for CMOS image sensor in $$0.18\,\upmu \hbox {m}$$0.18μm technology

This paper presents an ultra-low-power, bulk-driven, source-degenerated fully differential transconductor (FD-OTA), operating in subthreshold region. The source-degeneration (SD) and bulk-drive ensure linearity and rail-to-rail input swing. The flipped voltage follower and SD resistor perform V–I conversion in input core with power efficient class AB mode of operation. The reduction in open loop gain and gain bandwidth (GBW) of bulk-drive is compensated by applying partial positive feedback at diode connected MOSFET pair. The current gain from input core to output load side is set (1:1) in OTA₁ and (1:4) in OTA₂. The OTA₂ offers increased transconductance and GBW whereas self-cascode load increases the output impedance and overall gain of the FD-OTAs. Both the input core and common source self-cascode load operate in class AB mode so these FD-OTAs provide enhanced slew rates. These OTAs have been employed to implement Biquadratic low-frequency G_m-C filter suitable for bio-signal applications. The proposed OTA₂ has used dual supply voltage of ± 0.3 V and dissipates around 70 nW power and provides 62 dB FD-open loop gain with GBW of 7.73 kHz while driving the FD-load of 2 × 15 pF. The Cadence VIRTUOSO environment using UMC 0.18 µm CMOS process technology has been used to simulate the proposed circuit. The Simulation results verified fully differential total harmonic distortion of ? 72 dB, for 1.2 V_p–p signal at 200 Hz frequency in unity gain configuration with resistive degeneration of 1 MΩ for OTA₁.     

Developments in direct current plasma spraying

Thermal spray processing is used to confer specific in-service properties to components via the production of a coating between 50 μm (minimum value) to a few millimeters thick. Thermal spray represents a global market of about 4.8 Billion Euros (i.e., ∼ US$5 billion) in 2004; 30% of which is European based. 50% of this activity is devoted to plasma spray processing with about 90% dedicated to direct current (DC) plasma torches. Several developments of new torch architectures, among which three-cathode torches, have evolved recently. However, most of the recent progress has been applied to conventional DC torches. The advances were related to two prime factors: (i) the development of industrial sensors permitting to diagnose the processes during spray operation (especially in-flight particle characteristics in terms of their surface temperature and velocity) and additionally the monitoring of the substrate and coating temperatures with the objective of controlling the operating parameters via a close-loop controller; (ii) the adaptation of plasma spray systems to manufacture nano-structured coatings via the development of suspension plasma spray and solution plasma spray. As well, there has been an enhanced understanding of the mechanisms controlling the coating formation and of the effects of the arc root fluctuations; thereby permitting a more robust process. This paper develops the above points by presenting focused examples.     

Effect of crosslinking on the elasticity of polyelectrolyte multilayer films measured by colloidal probe AFM

A homemade colloidal probe atomic force microscope was used to perform nanoindentation with a spherical probe of 5 microm in diameter, at different approach velocities in order to extract the Young's modulus, E0, of poly(L-lysine)/hyaluronan (PLL/HA) films. This parameter is of prime importance to control cellular adhesion. The films were either kept in their native form or cross-linked with a mixture of 1-ethyl-3-(3-dimethyl aminopropyl)carbodiimide (EDC) and N-hydrosulfosuccinimide (sulfo-NHS), where the EDC concentration was varied from 1 up to 100 mg mL(-1) (approximately from 5 to 500 mM). A model based on Hertz mechanics was used to account for the interactions between film and probe. It is shown that the Young's modulus varies with the approach velocity for the native (PLL/HA) films, whereas for cross-linked ones, E0 is independent from the velocity over the whole range investigated. It is found that for native films, E0 takes a value of 3 kPa at low approach velocities, a velocity domain that should be relevant in cellular adhesion processes. The Young's modulus increases with the EDC concentration used to cross-link the films and levels off at a value of about 400 kPa for EDC concentrations exceeding 40 mg mL(-1). Thus, it is possible by crosslinking PLL/HA films to control their elastic properties with the aim to alter their behavior as to the cellular adhesion.     

Near net shape processing of a sintered alumina component: adjustment of pressing parameters through finite element simulation

Near net shape forming of alumina powder by cold die pressing and pressureless sintering was investigated. From experimental data of triaxial compression test of alumina powder, a hyperbolic cap model with a critical state line was proposed for densification of alumina powder at room temperature. For pressureless sintering, the phenomenological model for densification and viscous behavior of alumina powder proposed by Kim and co-workers was used. The constitutive models were implemented into a finite element program (ABAQUS) to simulate densification of alumina powder under cold die pressing and pressureless sintering. Finite element results were compared with experimental data for density distribution and deformation of an alumina powder compact under cold die pressing and pressureless sintering. New conditions of compaction were then proposed to reduce the distortion of the sintered part.     

0D/2D Heterostructures Vertical Single Electron Transistor

Mixed-dimensional heterostructures formed by the stacking of 2D materials with nanostructures of distinct dimensionality constitute a new class of nanomaterials that offers multifunctionality that goes beyond those of single dimensional systems. An unexplored architecture of single electron transistor (SET) is developed that employs heterostructures made of nanoclusters (0D) grown on a 2D molybdenum disulfide (MoS₂) channel. Combining the large Coulomb energy of the nanoclusters with the electronic capabilities of the 2D layer, the concept of 0D–2D vertical SET is unveiled. The MoS₂ underneath serves both as a charge tunable channel interconnecting the electrode, and as bottom electrode for each v-SET cell. In addition, its atomic thickness makes it thinner than the Debye screening length, providing electric field transparency functionality that allows for an efficient electric back gate control of the nanoclusters charge state. The Coulomb diamond pattern characteristics of SET are reported, with specific doping dependent nonlinear features arising from the 0D/2D geometry that are elucidated by theoretical modeling. These results hold promise for multifunctional single electron device taking advantage of the versatility of the 2D materials library, with as example envisioned spintronics applications while coupling quantum dots to magnetic 2D material, or to ferroelectric layers for neuromorphic devices.