A 40 keV cyclotron for radioisotope dating

We have built and begun testing a small low energy negative ion cyclotron for direct detection of ¹⁴C. At present, the cyclotron is operated in a high resolution mode at the 31st harmonic, with 1–2 kV on the dees. The high harmonic and a minimum number of turns of approximately 100, should give a fwhm mass resolution of about $\text{1}\text{30000}$ — sufficient to suppress the background from molecular ions such as ¹³CH^?. Background such as scattered ions of ¹²C^? and ¹³C^? should be totally suppressed by the cyclotron acceleration process. (At the 88″ cyclotron at LBL we found that ions only 1% off-resonance are suppressed by more than a factor of 10¹⁷.) A miniature Cs sputter source located at the center of the cyclotron is expected to provide more than 1 μA of negative carbon ions. Negative ions are used in order to eliminate the interference from ¹⁴N. Unlike high energy cyclotrons, focussing is obtained solely from the axial components of the accelerating electric field. The magnetic field is kept flat to within 1 part in 10⁴ in order to maintain exact isochronism throughout the several thousand accelerating rf cycles. The low final energy of 40 keV eliminates any danger from radiation or need for shielding, and the final orbit radius of only 10.5 cm, reduce the size and cost of the machine to that of conventional mass spectrometers.     

Liver parenchymal cells differ from the fat-storing cells in their lipid composition

The neutral lipid and phospholipid compositions of purified sinusoidal (fat-storing, endothelial and Kupffer) cells, parenchymal cells and liver homogenates were determined by thin layer chromatography. In addition, the retinoid content of the same purified cell populations was determined by high performance liquid chromatography. From each cell type, both a lipid droplet fraction and a pellet fraction (containing the majority of the remaining cell organelles) were prepared by differential centrifugation. Electron microscopic analysis showed that lipid droplets isolated from fat-storing cells were larger (up to 8 μm) than those isolated from parenchymal cells (up to 2.5 μm). Moreover, the parenchymal lipid droplets seemed to be surrounded by a membranous structure, while the fat-storing lipid droplets seemed not to be. Both fat-storing and parenchymal cells contained high concentrations of neutral lipids, 57.9 μg and 71.0 μg/10⁶ cells, respectively, while endothelial and Kupffer cells contained only 8.6 μg and 13.8 μg/10⁶ cells of neutral lipids, respectively. Sixty-five percent of fat-storing cell lipid droplet fractions comprised esters of retinol and cholesterol. This combined ester fraction contained mainly retinyl esters. In addition, considerable quantities (20%) of triglycerides were present. Parenchymal cell lipid droplet fractions comprised triglycerides (62%) and cholesteryl esters (up to 30%). The pellet fractions prepared from all four cell types consisted mainly of cholesterol (41–67%) and free fatt acids (20–28%). The phospholipid content was much higher in parenchymal cells than in the sinusoidal liver cell types. The relative proportions of the four major phospholipid classes were comparable in all liver cell types analyzed. It is concluded that parenchymal cell lipid droplets comprised mainly triglycerides and cholesteryl esters, which is in agreement with the function of parenchymal cells in lipid metabolism. Fat-storing cell lipid droplets consisted of retinyl esters and triglycerides, which correlates well with their function in retionid storage and metabolism.     

Identification of temperature-dependent water quality changes during a deep well injection experiment in a pyritic aquifer

Artificial recharge is a technique used increasingly to supplement drinking water supplies. To assess the potential water quality changes that occur during subsurface passage, a comprehensive deep-well injection experiment was carried out for a recharge scheme, where pretreated, aerobic surface water was injected at 300 m depth into an anaerobic aquifer. Water quality parameters were recorded over the 854-days long injection phase. The evolution of the major ion and redox chemistry was analyzed with a three-dimensional reactive multicomponent transport model. It was found that the oxidation of pyrite was the main driverforwater quality changes and that reaction rates depended significantly on the spatially/temporally varying groundwater temperature. With the temperature-dependency of the oxidation reactions incorporated into the model, the simulations give an accurate picture of the temporal and spatial evolution of the hydrochemical changes that occurred during the experiment. To delineate the influence of physical and chemical processes on local concentration changes the results of the reactive transport model simulations were compared with the corresponding results from nonreactive simulations. The study emphasizes the suitability of mechanistic multicomponent reactive transport modeling as an integrative tool for data analysis when physical transport and chemical processes interact.     

The use of hybrid computers for system-parameter estimation

This paper is devoted to the question in what way system-parameter estimation problems can be solved by means of hybrid equipment and what approaches are best suited for such problems.The combination of an analog model of the system under study and the digital computer taking care of the adjustment of that model is still an attractive scheme, in spite of the strong competition due to the rapid development of purely digital techniques.Advantages and problems are pointed out. Some illustrative examples are summarized.     

Quantitative T 2 * assessment of acute and chronic myocardial ischemia/reperfusion injury in mice

Object

Imaging of myocardial infarct composition is essential to assess efficacy of emerging therapeutics. T ₂ ^* mapping has the potential to image myocardial hemorrhage and fibrosis by virtue of its short T ₂ ^* . We aimed to quantify T ₂ ^* in acute and chronic myocardial ischemia/reperfusion (I/R) injury in mice.

Materials and methods

I/R-injury was induced in C57BL/6 mice (n?=?9). Sham-operated mice (n?=?8) served as controls. MRI was performed at baseline, and 1, 7 and 28?days after surgery. MRI at 9.4?T consisted of Cine, T ₂ ^* mapping and late-gadolinium-enhancement (LGE). Mice (n?=?6) were histologically assessed for hemorrhage and collagen in the fibrotic scar.

Results

Baseline T ₂ ^* values were 17.1?±?2.0?ms. At day 1, LGE displayed a homogeneous infarct enhancement. T ₂ ^* in infarct (12.0?±?1.1?ms) and remote myocardium (13.9?±?0.8?ms) was lower than at baseline. On days 7 and 28, LGE was heterogeneous. T ₂ ^* in the infarct decreased to 7.9?±?0.7 and 6.4?±?0.7?ms, whereas T ₂ ^* values in the remote myocardium were 14.2?±?1.1 and 15.6?±?1.0?ms. Histology revealed deposition of iron and collagen in parallel with decreased T ₂ ^* .

Conclusion

T ₂ ^* values are dynamic during infarct development and decrease significantly during scar maturation. In the acute phase, T ₂ ^* values in infarcted myocardium differ significantly from those in the chronic phase. T ₂ ^* mapping was able to confirm the presence of a chronic infarction in cases where LGE was inconclusive. Hence, T ₂ ^* may be used to discriminate between acute and chronic infarctions.     

Schraubpfähle: Herstellung,Tragfähigkeit und numerische Modellierung

Screw piles: construction methods, bearing capacity and numerical modeling. In the last years the technology of screw‐piling has been developed to overcome the shortcomings of the non‐displacement piles (e.g. bored or flight auger piles) that are always accompanied by soil disturbance, which affect negatively the pile bearing capacity. On the contrary, the screw piles can be considered more or less as full displacement piles, which are comparable with the conventional displacement driven piles. Due to vibration free installation and minimal noise disturbance of the environment they can be applied in urban areas, where driven piles are not appropriate. The full displacement screw piles offer meaningful advantages in terms of environmental engineering. This relatively new piling technology is used successfully as an efficient foundation system that fulfils both stability and serviceability requirements. The use of standard compact machines with high productivity simplifies site operations and contributes to economical performance of the system at the same time. A general overview of the pile system ‐installation techniques, process and bearing capacity – will be described and discussed. First numerical analyses, calibrated on pile load tests to check the validity of the numerical model were applied.     

Modelling of a Superheater Heat Exchanger with Complex Flow Arrangement Including Flow and Temperature Maldistribution

A network approach was used to develop a thermofluid process model of a cross-flow primary superheater heat exchanger with complex flow arrangement in the convective pass of a coal-fired boiler. The model solves the transient one-dimensional forms of the conservation equations for mass, energy, and momentum, combined with the applicable closure relations, boundary values, and initial values. The dual-tube 12-pass superheater was discretized along the flue gas flow path as well as along the steam flow path. The model accounts for the convective thermal resistance on the steam side, the conductive thermal resistances of the tube wall, and scaling or fouling on the tube walls, as well as the convective and radiative thermal resistances on the flue gas side. The model was qualitatively validated using real plant data and for reference purposes also systematically compared to conventional lumped parameter models. The ability of the model to analyze the effect of the ramp rate during load changes on the tube metal temperature was demonstrated, as well as the ability to determine the maldistribution of flow and temperature on the steam and flue gas sides. Models such as this can be employed to study complex thermofluid process phenomena that may occur during intermittent, transient, and low-load operation of power plants. This could form the basis for improving operations and for the development of advanced tools for online process condition monitoring.     

Serum concentrations of neutral and phenolic organohalogens in pregnant women and some of their infants in The Netherlands

As part of a large European Union (EU)-funded comparative toxicology and human epidemiology study, EU-Compare, a selection of organohalogen compounds (OHCs) was analyzed in maternal serum, collected at the 35th week of pregnancy, and in cord serum of a number of their infants to determine maternal concentrations and to investigate the extent of transplacental transfer of these compounds. Eight neutral OHCs were analyzed: one polychlorinated biphenyl (PCB: CB-153),4,4'-DDE, five polybrominated diphenyl ethers (PBDEs: BDE-47, BDE-99, BDE-100, BDE-153, and BDE-154), and hexabromocyclododecane (HBCDD). Five phenolic OHCs were analyzed: three hydroxylated PCBs (40H-CB-107, 40H-CB-146, and 40H-CB-187), one hydroxylated PBDE (60H-BDE-47), and pentachlorophenol (PCP). All OHCs, except 60H-BDE-47, were present in maternal and cord serum. The historically identified OHCs showed the highest concentration: 4,4'-DDE (median value 89 ng/g lipid in maternal serum and 68 ng/g lipid in cord serum) and PCP (median value 970 pg/g serum in maternal serum and 1500 pg/g serum in cord serum). HBCDD and the PBDEs were present at much lower concentrations. We conclude that OHCs are present in the serum of pregnant women, and all compounds tested are transferred over the placenta. Because transfer is occurring at a critical stage of infant development, investigation of the health impact is urgent.     

Modeling the diffusion-adsorption kinetics of 1-methylcyclopropene (1-MCP) in apple fruit and non-target materials in storage rooms

The purpose of this research was to model the kinetics of adsorption of 1-methylcyclopropene (1-MCP) in apple fruit and non-target solid materials found in apple storage rooms. The process was described by Fick’s second law of diffusion of the gas through the pores of the material coupled with adsorption kinetics of the gas on the material’s binding sites. A finite element formulation of the model, describing the diffusion and adsorption mechanisms separately, was first developed. The values of the relevant parameters were estimated based on headspace measurements of the decrease of 1-MCP in jars containing the different materials. The headspace concentration of 1-MCP was measured using gas chromatography. Apple fruit (Golden Delicious and Jonagold) and the following bin construction materials were investigated: high density polyethylene (HDPE), oak, poplar wood and card lining. The range in the magnitude of the diffusion coefficient, adsorption coefficient, and concentration of active sites in the various solids was 10,000-, 8-, and 30-fold, respectively.     

Pluggable SDN framework for managing heterogeneous SDN networks

Software‐defined networking (SDN) is a new network paradigm that is separating the data plane and the control plane of the network, making one or more centralized controllers to supervise the behaviour of the entire network. Different types of SDN controller software exist, and research dealing with the difficulties of consistently integrating these different controller types has mostly been declared future work. In this paper, the Domino framework is proposed, a pluggable SDN framework for managing heterogeneous SDN networks. In contrast to related work, the proposed framework allows research into SDN networks controlled by different types of SDN controllers attempting to standardize the northbound API of them. Domino implements a microservice plugin architecture where users can link different SDN networks to a processing algorithm. Such an algorithm allows for, eg, adapting the flows by building a pipeline using plugins that either invoke other SDN operations or generic data processing algorithms. The Domino framework is evaluated by implementing a proof‐of‐concept implementation, which is tested on the initial requirements. It achieves the modifiability and the interoperability with an average successful exchange ratio of 99.99%. The performance requirements are met for the frequently used commands with an average response time of 0.26 seconds, and the framework can handle at least 72 plugins simultaneously depending on the available amount of RAM. The proposed framework is evaluated by means of the implementation of a shortest path routing algorithm between heterogeneous SDN networks.