Middle distillates from hydrocracking of FT waxes: Composition,characteristics and emission properties

A light cobalt catalyzed Fischer–Tropsch (FT) wax was subjected to hydrocracking in the range of temperature 319–351 °C and hydrogen pressure between 3.5 and 6.0 MPa. The catalyst used was platinum on amorphous silica–alumina. Hydrocracking reaction led to an increase of middle distillate yield up to 85% with a contemporary increase of iso-paraffins concentration which resulted in a remarkable improvement of cold flow properties of the products. The freezing point of C₁₀–C₁₄ fraction passed from ?23 to ?45 °C while the pour point of C₁₅–C₂₂ fraction decreased from 13 to ?23 °C. The latter fraction displayed high cetane numbers ranging between 75 and 80. Changes in carbon distribution and molecular structure of products during hydrocracking have been rationalized in the light of the accepted hydrocracking mechanism where n-paraffins undergo to consecutive isomerization reactions leading to isomers with progressively higher branching degree and concomitant cracking reaction. Experimental evidences support the view that apparent reactivity of n-paraffins is chain length dependent, increasing with the molecular weight. Detailed characterization by NMR and GC showed that branching groups abundance in the middle distillate products was the following: methyl ? ethyl > propyl.Emission tests carried out with FT diesel and commercial ultra low sulfur diesel showed that FT diesel has excellent combustion properties and leads to a reduction of emissions.     

Correction to Lombardo and Foschi (2003).

Reports an error in the original article by G. P. Lombardo and R. Foschi (History of Psychology, 2003, 2, 123-142). In the reference list, several works by Pierre Janet were identified as being Paul Janet. The correct references are provided, where Paul Janet is identified by the initial P. and Pierre Janet is identified by the initials P. M. F.. (The following abstract of this article originally appeared in record 2003-03729-003.) Since the 1920s, the road to the acknowledgment of personality psychology as a field of scientific psychology that has individuality as its object began with the founding of the discipline by Gordon W. Allport. Historians of psychology have made serious attempts to reconstruct the cultural, political, institutional, and chronological beginnings of this field in America in the 20th century. In this literature, however, an important European tradition of psychological studies of personality that developed in France in the 2nd half of the 19th century has been overlooked. The aim of this article is to cast some light on this unexplored tradition of psychological personality studies and to discuss its influence on the development of the scientific study of personality in the United States. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Radioactive Marker Measurements in Heterogeneous Reservoirs: Numerical Study

A numerical study is performed to simulate the vertical deformation of a depth interval representing a marker spacing (10.5 m) located in a deep heterogeneous sedimentary reservoir. Realistic lithostratigraphic sequences typical of the Northern Adriatic basin are used. A number of scenarios are addressed consistent with the available data. In particular two basic geologic scenarios at the marker scale are simulated, one where sands prevail within the marker spacing (SD), and another where thin sandy and clayey layers alternate (CL). The sensitivity of the marker response is investigated in relation to clay and sand permeability and compressibility contrast, Biot’s coefficient, and respective position of monitoring and fluid pumping wells. The modeling results show that rock may indeed expand above and below depleted layers. Depending on the marker position the expansion may partially offset the compaction, especially in the CL scenario with a very low permeable clay. To obtain a representative field compaction the markers should span a depth interval made mostly by sand and entirely depleted, and should be installed in a test hole far from producing wells. Compressibility contrast and the Biot coefficient play a secondary role. Very critical measurements are provided by two markers which incorporate a thin (≈1 m) depleted level overlain and underlain by almost impermeable clay layers.     

Influence of water recharge on heat transfer in a semi-infinite aquifer

A simple model is proposed for the temperature field within an unconfined semi-infinite thick aquifer, with groundwater flowing parallel to the terrestrial heat flow in the recharge zone, and perpendicular to heat flow in the other parts of the aquifer. The results enable evaluation of the extent of the influence of the recharge zone, once the thermal and hydrological parameters are known. Beyond this zone, where thermal equilibrium between water and rock is reached, water temperature reaches the constant highest value, and water movement cannot be revealed by temperature measurements. Moreover, over,on the basis of the range of influence of the recharge zone, the regional water pore velocity can be inferred.     

Outline of nuclear piping research conducted in Italy

Following an early phase of limited activity at the University of Pisa on small stainless steel pipes containing axial cracks, in 1981 ENEA, the Italian Committee for Research and Development of Nuclear Energy and Alternative Energies, has started a massive research campaign on fracture of carbon and stainless steel piping containing through and part-through cracks loaded either under pressure or in bending. The purpose of the program was to develop a better understanding on pipes fracture behaviour in order to set new design criteria more realistic, yet conservative, than the guillotine break and prepare acceptance criteria for in-service flaws particularly under the growing pressure of IGSCC that has merciless affected worldwide practically any BWR piping system.The analysis of more than 100 tests carried out at CISE research centre, in Milano, on 4 inch, 6 inch, 8 inch and 10 inch pipes has indicated that unstable fracture requires at least 150° through wall crack under ASME maximum design stresses. The leak area, before instability takes place, is always less than 10% of the net cross section area of the pipe. This has led ENEA to consider a 10% break area as a reasonable value to calculate jet forces. Further, it was found that the net section collapse load criterion by far underestimates the actual collapse load and that 360° part-through cracks tend to switch from ductile to brittle failure mode of a pipe loaded in bending.Further work is planned for the next 3 years including high temperature tests, stainless steel weldments and HAZ tests, high compliance tests and eventually burst tests. Besides the ENEA's research program, Ansaldo AMN, the Italian Nuclear Architect Engineer, is developing theoretical studies and codes to treat the problem of pipe fracture.     

Use of a toasted durum whole meal in the production of a traditional Italian pasta: chemical, mechanical, sensory and image analyses

The characterisation of traditional Italian pasta obtained by mixing amounts of toasted whole meal with re-milled semolina and other ingredients was obtained by means of physico-chemical, rheological, mechanical, sensory and image analyses. The toasted meal showed higher ash, fibre and protein contents than re-milled semolina. The replacement of percentages of re-milled semolina with the toasted meal and soft flour increased tenacity and decreased extensibility and strength, making the dough less suitable for pasta-making. The P / L values were indices of high starch damage. The replacement of part of re-milled semolina and water with toasted whole wheat meal, soft flour and eggs increased the optimal cooking time and the amount of water absorbed during cooking but made the other cooking parameters worse. The image analysis provided evidence of the changes induced by the use of toasted wholemeal, soft flour and eggs in the microscopic structure of pasta protein and starch.     

The Association of Il28b Genotype with the Histological Features of Chronic Hepatitis C Is HCV Genotype Dependent

The interleukin 28B (IL28B) rs12979860 polymorphism is associated with treatment outcome in hepatitis C virus (HCV) genotype 1 and 4 patients. Its association with the histological features of chronic hepatitis C and disease severity needs further clarifications. To assess the correlation between IL28B genotype, HCV genotype and liver biopsy findings in untreated patients.

Materials and Methods

Pre-treatment liver biopsies from 335 HCV Caucasian patients (59% males, age 50 years) enrolled in the MIST study were staged for fibrosis and inflammation according to the METAVIR and the Ishak scoring systems; steatosis was dichotomized as <5% or ≥5%. IL28B was typed by Taqman Single Nucleotide Polymorphism (SNP) genotyping assay. HCV genotype was 1 in 151 (45%), 2 in 99 (30%), 3 in 50 (15%) and 4 in 35 (10%) patients. IL28B genotype was CC in 117 (34%), CT in 166 (49%) and TT in 52 (15%). At univariate analysis, the IL28B CC genotype was associated with severe portal inflammation in HCV-1 patients (CC vs. CT/TT: 86% vs. 63%, p = 0.005), severe lobular inflammation in HCV-2 patients (CC vs. CT/TT: 44% vs. 23%, p = 0.03), and less fatty infiltration in HCV-1 patients (CC vs. CT/TT: 72% vs. 51%, p = 0.02). Despite the lack of any association between IL28B and fibrosis stage, in HCV-3 patients IL28B CC correlated with METAVIR F3–F4 (CC vs. CT/TT: 74% vs. 26%, p = 0.05). At multivariate analysis, the genotype CC remained associated with severe portal inflammation in HCV-1, only (Odds Ratio (OR): 95% Confidence Interval (CI): 3.24 (1.23–8.51)). IL28B genotype is associated with the histological features of chronic hepatitis C in a HCV genotype dependent manner, with CC genotype being independently associated with severe portal inflammation.     

A low-power 2nd-order CT delta-sigma modulator with a single operational amplifier

We present a 2nd-order 4-bit continuous-time (CT) delta-sigma modulator (DSM) employing a 2nd-order loop filter with a single operational amplifier. This choice strongly reduces the power consumption, since operational amplifiers are the most power hungry blocks in the DSM. The DSM has been implemented in a 65 nm CMOS process, where it occupies an area of \(0.08\,\hbox {mm}^2\) . It achieves an SNDR of 64 dB over a 500 kHz signal bandwidth with an oversampling ratio of 16. The power consumption is \(76\,\upmu \hbox {W}\) from a 800 mV power supply. The DSM figure-of-merit is 59 fJ/conversion. The CT DSM is well suited for the receiver of an ultra-low-power radio.     

Data driven analysis of functional brain networks in fMRI for schizophrenia investigation

The purpose of this article is to present a methodology to identify the sources of activity in brain networks from functional magnetic resonance imaging (fMRI) data using the multiset canonical correlation analysis algorithm. The aim is to lay the foundations for a screening marker to be used as indicator of mental diseases. Group analysis blind source separation methods have proved reliable to extract the latent sources underlying the brain activities but currently there is no recognized biomarker for mental disorders. Recent studies have identified alterations in the so called default mode network (DMN) that are common to several neuropsychiatric disorders, including schizophrenia. In particular, here we account for the hypothesis that the alterations in the DMN activity can be effectively highlighted by analyzing the transient states between two different tasks. A set of fMRI data acquired from 18 subjects performing working memory tasks is investigated for such purpose. Subjects are patients affected by schizophrenia for one half and healthy control subjects for the other. Under these conditions, the proposed methodology provides high discrimination performances in terms of classification error, thereby providing promising results for a preliminary tool able to monitor the disease state or to perform a prescreening for patients at risk for schizophrenia. © 2014 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 24, 239–248, 2014     

Design and characterization of a chitosan physical gel promoting wound healing in mice

In this study, a sterile and biocompatible chitosan (CHI) gel for wound healing applications was formulated. CHI powder was treated in autoclave (ttCHI) to prepare sterile formulations. The heat treatment modified the CHI molecular weight, as evidenced by GPC analysis, and its physical–chemical features. Differential scanning calorimetry studies indicated that the macromolecules, before and after thermal treatment, differ in the strength of water-polymer interaction leading to different viscoelastic and flow properties. Thermally treated CHI exhibited the following effects: (i) increased the proliferation and migration of human foreskin foetal fibroblasts at 24 h; (ii) accelerated wound healing (measured as area of lesion) at 3 and 10 days in an in vivo model of pressure ulcers. These effects were linked to the increase of the hydroxyproline and haemoglobin content as well as Wnt protein expression. Moreover, we found a reduction of myeloperoxidase activity and TNF-α mRNA expression. These observations suggest the potential of this novel CHI gel in wound healing and other therapeutic applications.