Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

Optimizing content placement in a peer-assisted VoD architecture

Recently, a new peer-assisted architecture to build content delivery systems has been presented. This architecture is based on the use of the storage capacity of end-users’ set-top boxes (STBs), connected in a peer-to-peer (P2P) manner in order to help the content servers in the delivery process. In these systems, the contents are usually split into a set of smaller pieces, called sub-streams, which are randomly injected at the STBs. The present paper is focused on Video on Demand (VoD) streaming and it is assumed that the STB-based content delivery system is deployed over the global Internet, where the clients are distributed over different ISP networks. In this scenario, three different strategies are studied for increasing the percentage of data uploaded by peers, in order to offload the content servers as much as possible. First of all, a new mechanism is presented which determines which sub-stream has to be placed at which STB by a Non-Linear Programming (NLP) formulation. A different strategy for reducing the content server load is to take advantage of the available bandwidth in the different ISP networks. In this sense, two new mechanisms for forwarding the VoD requests to different ISP networks are presented. Finally, the present paper also shows that in some situations the available uplink bandwidth is associated with STBs that do not have the required sub-streams. Regarding this concern, a new mechanism has been designed that dynamically re-allocates some streams, which are being transmitted from specific STBs, to different STBs, in order to find the necessary resources to start new streaming sessions.     

Boosting the confidence of new product development teams: The role of team boundary spanning,team size and functional diversity

In today's highly interconnected, uncertain and dynamic business environment, team boundary spanning has become an important determinant of the performance of new product development (NPD) projects. Despite the positive evidence supporting the use of boundary spanning activities by NPD teams, little is still known about how boundary spanning teams become high-performance teams. The current study advances research on this subject by examining the mediating effect of team potency on the relationship between team boundary spanning and new product performance, as well as the moderating effects of team size and functional diversity on the relationship between team boundary spanning and team potency. Data from a time-lagged survey study of 140 NPD projects found that team boundary spanning can promote team potency that, in turn, results in greater new product quality and new product creativity. The positive effect of team boundary spanning on team potency was found to be more pronounced for NPD teams of medium size and high levels of functional diversity.     

Plasmon resonant amplification of a hot electron-driven photodiode

Nano Research - We report plasmon resonant excitation of hot electrons in a photodetector based on a metal/oxide/metal (Au/Al2O3/graphene) heterostructure. In this device, hot electrons, excited...     

ARPO-2: An expert system for legal advice on the breach of building contracts

Although Berman and Hafner [Berman 1989, pp. 928–938] presented the possibility to adapt the model of reasoning of development of an expert system for medical diagnosis to the reasoning of a judge when he/she sentences criminals does not resemble the reasoning found in the decisions of physicians, mathematicians or statisticians.When a lawyer reasons, he/she not only looks for the solution of a case; he/she simultaneously looks for the bases on which his/her reasoning can rest [Galindo 1992, pp. 363–367]. That is to say, he/she not only needs to find the solution but moreover he/she has to find the references (laws, jurisprudence and bibliography) that allow him/her to argue the solution.In many cases, computer solutions to these reasoning processes have been made in a separated way: the solution to the cases using expert systems, and the search of documentation using information retrieval systems.This paper presents the ARPO-2 prototype, a solution integrating the two aspects of legal reasoning: an expert system which is able to simultaneously find the solution to a problem and to give the necessary references so that the lawyer argues the solution. The subject on which the prototype solves problems is the breach of building contracts.In this paper, we describe the process of development of an expert system for solving, justification and documentation of breach of contracts, giving details on the way how the objects that intervene in the case were defined as well as on the reasoning followed.This paper was funded in part by DGICYT, Spanish Civil Law Computerization Project: PB870-632.     

Performance of Scheduling Policies in Adversarial Networks with Non-synchronized Clocks

In this paper we generalize the Continuous Adversarial Queuing Theory (CAQT) model (Blesa et al. in MFCS, Lecture Notes in Computer Science, vol. 3618, pp. 144–155, 2005) by considering the possibility that the router clocks in the network are not synchronized. We name the new model Non Synchronized CAQT (NSCAQT). Clearly, this new extension to the model only affects those scheduling policies that use some form of timing. In a first approach we consider the case in which although not synchronized, all clocks run at the same speed, maintaining constant differences. In this case we show that all universally stable policies in CAQT that use the injection time and the remaining path to schedule packets remain universally stable. These policies include, for instance, Shortest in System (SIS) and Longest in System (LIS). Then, we study the case in which clock differences can vary over time, but the maximum difference is bounded. In this model we show the universal stability of two families of policies related to SIS and LIS respectively (the priority of a packet in these policies depends on the arrival time and a function of the path traversed). The bounds we obtain in this case depend on the maximum difference between clocks. This is a necessary requirement, since we also show that LIS is not universally stable in systems without bounded clock difference. We then present a new policy that we call Longest in Queues (LIQ), which gives priority to the packet that has been waiting the longest in edge queues. This policy is universally stable and, if clocks maintain constant differences, the bounds we prove do not depend on them. To finish, we provide with simulation results that compare the behavior of some of these policies in a network with stochastic injection of packets.     

Moving objects forecast in image sequences using autoregressive algorithms

The objective of this paper is to present an overall approach to forecasting the future position of the moving objects of an image sequence after processing the images previous to it. The proposed method makes use of classical techniques such as optical flow to extract objects’ trajectories and velocities, and autoregressive algorithms to build the predictive model. Our method can be used in a variety of applications, where videos with stationary cameras are used, moving objects are not deformed and change their position with time. One of these applications is traffic control, which is used in this paper as a case study with different meteorological conditions to compare with.

Ordinal regression by a gravitational model in the field of educational data mining

Educational data mining (EDM) is a research area where the goal is to develop data mining methods to examine data critically from educational environments. Traditionally, EDM has addressed the following problems: clustering, classification, regression, anomaly detection and association rule mining. In this paper, the ordinal regression (OR) paradigm, is introduced in the field of EDM. The goal of OR problems is the classification of items in an ordinal scale. For instance, the prediction of students' performance in categories (where the different grades could be ordered according to A ? B ? C ? D) is a classical example of an OR problem. The EDM community has not yet explored this paradigm (despite the importance of these problems in the field of EDM). Furthermore, an amenable and interpretable OR model based on the concept of gravitation is proposed. The model is an extension of a recently proposed gravitational model that tackles imbalanced nominal classification problems. The model is carefully adapted to the ordinal scenario and validated with four EDM datasets. The results obtained were compared with state‐of‐the‐art OR algorithms and nominal classification ones. The proposed models can be used to better understand the learning–teaching process in higher education environments.     

Enhancing the semantics of UML association redefinition

Association redefinition is a UML construct that permits us to define an association end more specifically in a particular context. Concretely, it allows specifying some additional participation and cardinality constraints on the association. Association refinements, which have been studied and used by many authors in conceptual modelling languages prior to UML, are closely related to association redefinitions. They also permit to refine the ends of an association adding participation and cardinality constraints. In this paper, we analyze and compare the semantics of both concepts and propose to extend the semantics of association redefinitions in UML to cover all the constraints that may be expressed by association refinements in other conceptual modelling languages. Additionally, we present how to integrate previous results on validation of association refinements to UML and how to generate code for a relational technology platform. Finally, we provide a prototype tool to verify the feasibility of the approach.     

Pigment and colour stability of frozen kiwi-fruit slices during prolonged storage

Changes in major pigment constituents of frozen kiwi-fruit slices during prolonged storage at –18° C and correlation with colour measurements (Hunter Lab parameters) were studied. Kiwi-fruit cultivars (Hayward, Bruno, Monty and Abbot) were processed without previous treatment and vacuum packed after freezing. HPLC using a diode array detector was used to individually quantify and identify the three major pigment components (xanthophylls, chlorophylls and derivatives and-carotene). The colour of fresh and frozen slices by Hunter Color values were correlated with each class of pigment compounds. An apparent first order degradation rate was found for total chlorophylls and xanthophylls. Hayward and Bruno were more suitable for prolonged freezing preservation in terms of colour deterioration.

---

Haltbarkeit von Pigment und Farbe gefrorener Kiwifrucht-Scheiben während langer Lagerung

Zusammenfassung Es wurden die Veränderungen der meisten Pigmentbestandteile gefrorener Kiwifrucht-Scheiben während langer Lagerzeit bei –18°C und die Korrelation mit Farbmessungen studiert. Kiwifrüchte der Sorten Hayward, Bruno, Monty und Abbot wurden ohne vorherige Behandlung unter Vakuum direkt nach dem Gefrierprozeß verpackt. Mit HPLC wurde quantitativ gemessen und die drei Pigmentbestandteile Xanthophyll, Chlorophyll und-Carotin identifiziert. Die Farbe der frischen, gefrorenen Scheiben (Hunter-Farb-Werte) korrelierte mit jedem der Pigmentbestandteile. Ein Verlust, scheinbar erster Ordnung, wurde für Chlorophyll und Xantophyll bei den Sorten Hayward und Bruno beobachtet, jedoch sind sie für das Gefrieren bei langer Lagerzeit trotz Farbverlust geeignet.