An efficient algorithm for the minimum cost min-max load terminal assignment problem

One of the main issues to be addressed in topological design of centralized networks is that of assigning terminals to concentrators in such a way that each terminal is assigned to one (and only one) concentrator and the total number of terminals assigned to any concentrator (which is referred to as load in this paper) does not overload that concentrator, i.e. is within the concentrator's capacity. Under these constraints, an assignment with the lowest possible cost is sought. An assignment of terminals to concentrators which minimizes the maximum load among the concentrators (which qualitatively represents congestion at some hot spots in a network service area) is referred to as a min-max load assignment. In this paper, we consider the problem of finding a min-max load assignment with the-lowest cost. We call this problem the Minimum Cost Min-Max Load Terminal Assignment Problem (MCMLTAP). We present an algorithm for MCMLTAP and prove that the problem is optimally solvable in polynomial time using our proposed algorithm.     

Optical imaging of anatomical maps derived from magnetic resonanceimages using time-independent optical sources

Presents a model suitable for computing images of absorption cross sections of thick tissue structures illuminated at near infrared (NIR) wavelengths from tomographic projection data. Image reconstruction is accomplished by solving a system of linear equations derived from transport theory. Reconstruction results using different algebraic solvers are shown for anatomical maps of the breast, derived from magnetic resonance imaging data, containing two simulated pathologies, in which case qualitatively good reconstructions were obtained. Evaluation of magnetic resonance (MR) data to optimize NIR optical tomographic imaging methods and to assess the feasibility of a combined MR-optical measurement scheme is discussed     

波导短程透镜球差特性分析及其焦距精确测量方法的研究

本文研究短程透镜的焦点位于端面外的球差特性。对焦点位于波导外部（包括端面）的情况给出了一种精确测量焦距新方法，采用这种方法简单易行，测量精度取决于读数显微镜的读数精度（０．０１ｍｍ）。     

一种铁氧体移相驱动器专用集成电路

介绍了ＳＡ０１８铁氧体移相驱动器专用集成电路的工作原理，电路设计和实验结果。该电路的内部电路设计有双路激励驱动器，放大器，积分器和双路高速比较器等功能单元。将铁氧体移相器的激励驱动器和相位控制器融于一体，大大减少了铁氧体移相器的外围设计。     

关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．     

Tracking Control and Synchronization for Two-Dimension Discrete Chaotic Systems

1　ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｃｅ 1 990 ,ｃｈａｏｔｉｃｓｙｎｃｈｒｏｎｉｚａｔｉｏｎ[1～ 4] ａｎｄｃｈａｏｔｉｃｃｏｎｔｒｏｌｌｉｎｇ[5～6] ｈａｖｅｒｅｃｅｉｖｅｄａｇｒｅａｔｄｅａｌｏｆａｔｔｅｎｔｉｏｎ[7～1 1 ] ,ａｎｄｃｈａｏｔｉｃｓｙｎｃｈｒｏｎｉｚａｔｉｏｎｉｓａｐｈｅｎｏｍｅｎｏｎｏｆｉｎｔｅｒｅｓｔｉｎｆｉｅｌｄｓｆｒｏｍｅｌｅｃｔｒｏｎｉｃｓｔｏｃｏｍｍｕｎｉｃａｔｉｏｎ[1 2 ] ,ａｎｄｆｒｏｍｂｉｏｐｈｙｓｉｃｓｔｏｎｅｕｒｏ ｓｃｉｅｎｃｅ[1 3] .Ｉｆｃｈａｏｔｉｃｓｙｎｃ…     

单轴-平面W型复合锶铁氧体的制备及其吸波特性研究

用草酸盐共沉淀和微量掺杂法研制六角晶系W型Ni,Zn,Co,Al多元复合锶铁氧体，通过调节Ni2W同Co2W的摩尔比例，可使该种铁氧体易磁化方向从C单轴型向垂于C轴的平面型转化，控制置换锶铁氧体中部分Fe3 的微量掺杂Al3 ，可以调整4πMs值，提高磁晶各向异性场，测试分析了5种不同含Co量的W型复合锶铁氧体粉料涂层的吸波特性，发现其自然共振吸收峰随Co含量增加向低频方向偏移，最高吸收峰可达32．8dB，是适用于电子隐形技术的高品位的微波吸收剂。     

智能磁流变(RM)阻尼器的实验研究

磁流变 (MR)液是一种新型的智能材料 ,而MR阻尼器具有在外加电流作用下快速可逆地改变阻尼特性的特点。本文针对所作的MR阻尼器实验研究 ,介绍了实验过程及相关数据 ,并对其进行了分析。实验表明 :MR阻尼器具有良好的阻尼可控制特性 ,是结构消能减振控制的理想元件。     

在柔性变焦系统中的压力变焦镜

从理论上和实验上对水冷镜的镜面曲率半径随压力变化的规律作了研究。对压力变形后镜面相对于球面作了波像差分析，分析表明压力变焦镜用于中红外激光系统是合适的     

厚断面球铁的声速

论述了影响厚断面球铁声速和声波衰减的各种因素。指出，必须在应力状态下同时考核声速和声波衰减，以作为判别厚断面球铁材质的一种手段。