用PIXE方法研究骨折家兔骨骼微量元素的变化

用质子激发X荧光分析法测定48只家兔在挠骨骨折愈合过程中骨骼中多种微量元素含量的变化。结果表明，Fe和Sr分别呈鼓凸形和下凹形规律性变化，故Fe和Sr含量的变化可作为骨折愈合过程的指示剂。在骨折愈合过程中发现骨骼和血液中元素钙的相对含量保持不变，故无法为西医用补充钙来治疗骨折的疗法提供依据，但我们的研究结果却表明中医补充微量元素治疗骨折的疗法是有道理的。     

非线性动态系统“黑箱”建模方法的研究

本文研究弱非线性动态系统“黑箱”建模的理论和方法，并简要给出根据此方法建模的结果。     

EC与~（99m）Tc－GH之间的配体交换反应动力学研究

实验表明，ＥＣ浓度与配体交换反应速度常数无关，体系的ｐＨ值对速度常数和９９ｍＴｃ－ＥＣ的标记率影响较大。测定并计算了不同ｐＨ值的交换反应速度常数。结果表明，为保证用配体交换法制备９９ｍｃ－ＥＣ时９９ｍｃ－ＥＣ的标记率大于９０％，体系的ｐＨ值必须≥８。     

A conditional classification recurrent RBM for improved series mid-term forecasting

In the context of human-robot and robot-robot interactions, the better cooperation can be achieved by predicting the other party’s subsequent actions based on the current action of the other party. The time duration for adjustment is not sufficient provided by short term forecasting models to robots. A longer duration can by achieved by mid-term forecasting. But the mid-term forecasting models introduce the previous errors into the follow-up forecasting and amplified gradually, eventually invalidating the forecasting. A new mid-term forecasting with error suppression based on restricted Boltzmann machine(RBM) is proposed in this paper. The proposed model can suppress the error amplification by replacing the previous inputs with their features, which are retrieved by a deep belief network(DBN). Furthermore, a new mechanism is proposed to decide whether the forecasting result is accepted or not. The model is evaluated with several datasets. The reported experiments demonstrate the superior performance of the proposed model compared to the state-of-the-art approaches.

     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Study on heat conduction and adsorption/desorption characteristic of MIL-101/few layer graphene composite

Journal of Porous Materials - Aiming at the poor heat conduction performance of porous MIL-101 applied in adsorption cooling process, few layer graphene (FLG) was selected as a promising thermal...     

Conductivity enhancement in transparetn ZnO films via Al-dopping produced by CW-CO2 laser-induced evaporation

Highly conductive transparent aluminium-doped ZnO (ZnO:A1) films were successfully deposited by CW-CO₂ laser-induced evaporation. Optimisation of evaporation parameters was based on laser power, substrate temperature, O₂ partial pressure in the vacuum chamber and amount of Al in the ZnO source pellet. ZnO:A1 films with an electrical resistivity as low as 6.6 × 10⁻²Ω·cm and an optical transmission of 80% at 500nm were obtained at laser power of 15 W, substrate temperature of about 200°C, O₂ partial pressure of 6—7 × 10⁻⁴ Torr and 5wt.% Al. Conductivity of ZnO films can be increased one order via Al-doping in ZnO films. The films obtained by laser-induced evaporation have compared quite favorably with the high quality films obtained by sputtering.     

稀土含量对喷熔层组织及耐蚀性的影响

本文通过在镍基自熔合金粉末中加入不同含量的稀土，研究了稀土含量对喷熔层组织及耐蚀性的影响规律及其作用机制。结果表明，在喷熔材料中加入适量稀土，可使喷熔层组织细化、晶界净化，从而使腐蚀过程中的表面活性点减少，耐蚀性提高。     

锻压机械打击力测量误差的加速度补偿

提出了锻压机械打击力测量中存在的问题，介绍了常用的补偿法，并通过实验验证了加速度补偿法是消除锻压机械打击力测量误差的有效途径。     

铂铑包覆钼合金搅拌器的研制

介绍了铂铑包覆钼合金搅拌器的结构与技术要求,以及搅拌器的制作与使用效果。研制结果表明,国产搅拌器达到了日本同类产品的水平。