Some Remarks on the Classification of Water Vapor Sorption Isotherms and Blahovec and Yanniotis Isotherm Equation

Mathematical analysis was performed on equations describing water vapor sorption isotherms. It was shown that an identity exists between the Blahovec and Yanniotis (BY), D'Arcy and Watt (DW), and generalized D'Arcy and Watt (GDW) models. The original BY model has been modified to account for temperature dependence of the model parameters. This modification enables the application of this model to describe sorption data obtained at different temperatures. A new method for classification of sorption isotherms has been proposed that is much simpler than the classification established by Blahovec and Yanniotis.     

Sorption Properties of Vacuum-Dried Strawberries

This work demonstrates the influence of changes in parameters of vacuum drying (temperature and pressure) on the sorption properties of dried strawberries. Fruits were dried at 50 and 70°C under pressures of 4 and 16 kPa. Vacuum drying was also conducted during the first 4 h at 70°C and then the temperature was decreased to 50°C at a pressure of 4 kPa. The other combination included increasing the pressure after the first 4 h from 4 to 16 kPa at a drying temperature of 70°C. Sorption isotherms were determined in the dried strawberries. It was shown that with increasing drying temperatures, there was a notable deterioration in the capacity for absorbing water vapor by the vacuum-dried fruit. On the other hand, the pressure at which vacuum drying proceeded did not significantly affect water vapor absorption. Changing the parameters of vacuum drying—that is, temperature in the range of 50–70°C and pressure in the range of 4–16 kPa—affected the shape and structure of the resultant dried strawberries. The combination of vacuum drying with convective drying also influenced the shape and structure of the dried fruit.     

CHANGES OF RHEOLOGICAL PROPERTIES OF APPLE TISSUE UNDERGOING CONVECTIVE DRYING

ABSTRACT

The aim of this work was to investigate rheological properties of apple cubes undergoing convective drying. Compression-relaxation test was used to follow changes of properties under investigation.

Raw apple appeared to be very heterogeneous material from the rheological point of view. The relationship between stress and strain was concave downwards and the concavity increased until water content of 2·5 g/g d.m. was reached. Then the relationship begun to straighten and for dry material developed stress was linearly dependent on strain. The resistance of deformation decreased with decreasing water content. Analysis of relaxation showed that the rate of relaxation increased with decreasing water content and the unrelaxed stress was smaller the lower was the water content.

Apple cubes undergoing drying are pictured as material composed of three compartments with different rheological properties. The outer layer is dry, inelastic and difficult to deform. Underneath is moist material with no turgor and relatively easy to compress, and the core with properties of raw apples. During drying the second layer grows in expense of the core and porous structure with many voids filled with air is formed. Share of each compartment in the volume of apple cube undergoing drying affects average rheological properties of the material.     

The Role of MgCl2 as Supporter for the New Generation of Olefin Polymerization Catalysts

Most of the research in the field of olefin polymerization is focused on TiC1, catalysts on a specially prepared MgCl, support. In order to combine a high polymer yield with good stereoselectivity, a complexed cocatalyst is used. Most frequently it is a mixture of AIEtzCl or AlEt, with an electron donor such as tetrahydrofuran (THF) or ethyl benzoate for ethylene and propylene polymerization, respectively.     

Comparative Analysis of Energetic Properties of Ti6Al4V Titanium and EN-AW-2017A(PA6) Aluminum Alloy Surface Layers for an Adhesive Bonding Application

The purpose of this article is to present energetic properties of surface Ti6Al4V titanium as well as surface EN-AW-2017A(PA6) aluminum alloy layers. Values of surface free energy after selected mechanical operations and ozonation were compared. In addition, the influence of different values of ozone concentration on surface layer energetic activation was analyzed. Dispersive and polar components of surface free energy were of particular concern. Comparative evaluation of shearing strength of Ti6Al4V titanium and EN-AW-2017A(PA6) aluminum alloy single-lap adhesive bonded joints were presented. Results can be used as pro-ecological methods of titanium and aluminum alloys preparing for applications where adhesive phenomenon is important.     

Effect of Mode of Drying on Microstructure of Potato

Potato v. Irga was subjected to blanching, and thereafter was dried by convection, puff-drying, and freeze-drying. Microstructure of raw, blanched, and dried tissue was analyzed under the light microscope using computer image analysis. It was found that the tissue of the investigated variety is built up from cells much smaller than those described in literature for other cultivars. Blanching caused starch gelatinization and increase of cross-sectional area of cells. There was no evidence of broken cell walls. Convective drying resulted in cell shrinkage and some breaking of cell walls. It was estimated that some 12% of cells lost integrity during drying. Limited disintegration of the tissue caused by convective drying is attributed to small size of cells, large contact area, and high cohesive forces between cells. Puff-drying damaged the tissue much more than the convective drying. The most devastating to tissue microstructure was freeze-drying, probably freezing per se.     

Selective oxidation of ammonia to nitrogen on transition metal containing mixed metal oxides

The selective catalytic oxidation of ammonia to nitrogen (NH₃-SCO) has been studied over hydrotalcite derived mixed metal oxides containing Cu, Co, Fe or Ni. XRD, BET, NH₃-TPD and TPR techniques were used for catalysts characterization. Results of NH₃-SCO were compared with those of selective catalytic reduction of NO with NH₃ (NO-SCR). Reaction mechanism was studied by temperature-programmed surface reaction (TPSR) and activity tests with a various contact time. Catalytic performance of the studied samples depends on both kind and loading of transition metals in the mixed metal oxide system. The Cu-containing samples have been found to be the most active catalysts of the NH₃-SCO process. Transition metal loading strongly influences distribution of ammonia oxidation products. The highest selectivity to N₂ was measured for the catalysts with the lowest transition metal content.     

Fentanyl Structure as a Scaffold for Opioid/Non-Opioid Multitarget Analgesics

One of the strategies in the search for safe and effective analgesic drugs is the design of multitarget analgesics. Such compounds are intended to have high affinity and activity at more than one molecular target involved in pain modulation. In the present contribution we summarize the attempts in which fentanyl or its substructures were used as a μ-opioid receptor pharmacophoric fragment and a scaffold to which fragments related to non-opioid receptors were attached. The non-opioid ‘second’ targets included proteins as diverse as imidazoline I₂ binding sites, CB₁ cannabinoid receptor, NK₁ tachykinin receptor, D₂ dopamine receptor, cyclooxygenases, fatty acid amide hydrolase and monoacylglycerol lipase and σ₁ receptor. Reviewing the individual attempts, we outline the chemistry, the obtained pharmacological properties and structure-activity relationships. Finally, we discuss the possible directions for future work.     

SBA-15 mesoporous silica modified with rhodium by MDD method and its catalytic role for N<Subscript>2</Subscript>O decomposition reaction

SBA-15 mesoporous silicas modified with rhodium were studied as catalysts for the N₂O decomposition reaction. Rhodium was deposited on SBA-15 by the Molecular Designed Dispersion (MDD) method using Rh(acac)₃ as a precursor of active phase. The same method was used for the deposition of Cu, Fe, Al and Ti. The SBA-15 support modified with metals were characterized with respect to metal loading (EPMA), structure (XRD), texture (BET), morphology (SEM), Rh dispersion (oxygen chemisorption), surface acidity (pyridine adsorption) and chemical nature of introduced copper and iron species (UV–vis-DRS). The rhodium-containing SBA-15 samples were found to be active catalysts for the N₂O decomposition reaction. Deposition of Al on the Rh-loaded catalyst increased its activity. An opposite effect was observed for the samples modified with Cu and Fe.