Optimization of A-TIG process parameters using response surface methodology

In the present work, the influence of process parameters such as welding current (I), welding speed (S), and flux coating density (F) on different aspects of weld bead geometry for example depth of penetration (DOP), bead width (BW), depth to width ratio (D/W), and weld fusion zone area (WA) were investigated by using the central composite design (CCD). 9–12% Cr ferritic stainless steel (FSS) plates were welded using A-TIG welding. It was observed that all input variables have a direct influence on the DOP, BW, and D/W. However, flux coating density has no significant effect on WA. Mathematical models were generated from the obtained responses to predict the weld bead geometry. An optimized DOP, BW, D/W, and WA of 6.95?mm, 8.76?mm, 0.80, and 41.99?mm², respectively, were predicted at the welding current of 213.78 A, the welding speed of 96.22?mm/min, and the flux coating density of 1.99?mg/cm². Conformity test was done to check the practicability of the developed models. The conformity test results were in good agreement with the predicted values. Arc constriction and reversal in Marangoni convection were considered as major mechanisms for the deep and narrow weld bead during A-TIG welding.     

Does India need to harmonize the law of patent exhaustion and parallel imports?

The amendment of patent law of India in 2005 to fulfill her international obligation under the TRIPS Agreement (World Trade Organization Agreement on Trade Related Intellectual Property Rights) was an outcome of an attempt to balance the competing interests of several stakeholders, including indigenous pharmaceutical companies, multi-national pharmaceutical companies, non-governmental organizations and civil society groups concerned with access to affordable drugs. The adverse consequence of this delicate balancing is introduction of some provisions in the Act whose compatibility with the TRIPS Agreement is questionable, and which therefore are prone to litigations. Section 107A(b) of the amended patent law dealing with parallel imports is one such provision, which, if interpreted word for word could have significant connotations for the rights of a patent owner. This article aims to examine the inconsistencies intrinsic in Section 107A(b) and discusses the divergences in the Indian patent law associated with the doctrine of exhaustion and parallel imports. This article also proposes legal amendments with a view to eliminate inconsistencies intrinsic in the section and enlarge the ambit of the exhaustion principle conceptualized therein, while concurrently remaining compliant with the TRIPS Agreement.     

Solving single-product economic lot-sizing problem with non-increasing setup cost,constant capacity and convex inventory cost in O(N log N) time

This paper considers an economic lot sizing model with constant capacity, non-increasing setup cost, and convex inventory cost function. Algorithms with computational time of O(N×TD_N)have been developed for solving the model, where N is the number of planning periods and TD_N is the total demand. This study partially characterizes the optimal planning structure of the model. A new efficient algorithm with computational time of O(N log N) has also been developed based on the partial optimal structure. Moreover, computational study demonstrates that the new algorithm is efficient.     

Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level

A new kind of molecularly imprinted polymer-modified graphite electrode was fabricated by “grafting-to” approach, incorporating sol–gel technique, for the detection of acute deficiency in serum ascorbic acid level (SAAL), manifesting hypovitaminosis C. The modified electrode exhibited ascorbic acid (AA) oxidation at less positive potential (0.0 V) than the earlier reported methods, resulting in a limit of detection as low as 6.13 ng mL⁻¹ (RSD = 1.2%, S/N = 3). The diffusion coefficient (1.096 × 10⁻⁵ cm² s⁻¹), rate constant (7.308 s⁻¹), and Gibb's free energy change (−12.59 kJ mol⁻¹) due to analyte adsorption, were also calculated to explore the kinetics of AA oxidation. The proposed sensor was found to enhance sensitivity substantially so as to detect ultra trace level of AA in the presence of other biologically important compounds (dopamine, uric acid, etc.), without any cross interference and matrix complications from biological fluids and pharmaceutical samples.     

Quantification of crustal geotherms along with their error bounds for seismically active regions of India: A Matlab toolbox

Determination of the thermo-mechanical structure of the crust for seismically active regions using available geophysical and geological data is of great importance. The most important feature of the intraplate earthquakes in the Indian region are that the seismicity occurs within the entire crust. In Latur region of India an earthquake occurred in the upper crust. In such situations, quantifying the uncertainties in seismogenic depths becomes very important. The stochastic heat conduction equation has been solved for different sets of boundary conditions, an exponentially decreasing radiogenic heat generation and randomness in thermal conductivity. Closed form analytical expressions for mean and variance in the temperature depth distribution have been used and an automatic formulation has been developed in Matlab for computing and plotting the thermal structure. The Matlab toolbox presented allows us to display the controlling thermal parameters on the screen directly, and plot the subsurface thermal structure along with its error bounds. The software can be used to quantify the thermal structure for any given region and is applied here to the Latur earthquake region of India.     

Agent-based negotiation and decision making for dynamic supply chain formation

Modern businesses are facing the challenge of effectively coordinating their supply chains from upstream to downstream services. It is a complex problem to search, schedule, and coordinate a set of services from a large number of service resources under various constraints and uncertainties. Existing approaches to this problem have relied on complete information regarding service requirements and resources, without adequately addressing the dynamics and uncertainties of the environments. The real-world situations are complicated as a result of ambiguity in the requirements of the services, the uncertainty of solutions from service providers, and the interdependencies among the services to be composed. This paper investigates the complexity of supply chain formation and proposes an agent-mediated coordination approach. Each agent works as a broker for each service type, dedicated to selecting solutions for each service as well as interacting with other agents in refining the decision making to achieve compatibility among the solutions. The coordination among agents concerns decision making at strategic, tactical, and operational level. At the strategic level, agents communicate and negotiate for supply chain formation; at the tactical level, argumentation is used by agents to communicate and understand the preferences and constraints of each other; at the operational level, different strategies are used for selecting the preferences. Based on this approach, a prototype has been implemented with simulated experiments highlighting the effectiveness of the approach.     

Least squares twin support vector machines for pattern classification

In this paper we formulate a least squares version of the recently proposed twin support vector machine (TSVM) for binary classification. This formulation leads to extremely simple and fast algorithm for generating binary classifiers based on two non-parallel hyperplanes. Here we attempt to solve two modified primal problems of TSVM, instead of two dual problems usually solved. We show that the solution of the two modified primal problems reduces to solving just two systems of linear equations as opposed to solving two quadratic programming problems along with two systems of linear equations in TSVM. Classification using nonlinear kernel also leads to systems of linear equations. Our experiments on publicly available datasets indicate that the proposed least squares TSVM has comparable classification accuracy to that of TSVM but with considerably lesser computational time. Since linear least squares TSVM can easily handle large datasets, we further went on to investigate its efficiency for text categorization applications. Computational results demonstrate the effectiveness of the proposed method over linear proximal SVM on all the text corpuses considered.