Comment on ‘Frequency domain identification of Wiener models’, by E.W. Bai, Automatica 39 (2003), 1521–1530

A frequency-domain identification method is proposed by Bai (2003) for Wiener systems. The key component is a phase estimator that gives estimates of the linear subsystem phase for different frequencies. These estimates are then used to identify the whole system. In this note, it is shown that the phase estimator is not generally consistent. Consequently, consistency of the overall identification method is in turn not generally guaranteed.     

Hammerstein Systems Identification in Presence of Hard Nonlinearities of Preload and Dead-Zone Type

Hammerstein system identification is considered in presence of preload and dead zone nonlinearities. The discontinuous feature of these nonlinearities makes it difficult to get a single system parameterization involving linearly all unknown parameters (those of the linear subsystem and those of the nonlinearity). Therefore, system identification has generally been dealt with using multiple stage schemes including different parametrizations and several data acquisition experiences. However, the consistency issue has only been solved under restrictive assumptions regarding the identified system. In this paper, a new identification scheme is designed and shown to be consistent under mild assumptions.     

Electron microscopic observations on the alterations of tegumental surface of Raillietina echinobothrida treated with root-peel extract of Potentilla fulgens

Potentilla fulgens, a member of the family Rosaceae, has been known since ancient times in Northeast India for its antiparasitic, antitumour and antidiabetic properties. The crude ethanolic extract of the plant was assayed against Raillietina echinobothrida, the intestinal cestode parasite of domestic fowl to authenticate the putative anthelmintic efficacy and cestocidal potential in particular of the plant. Treatment of the worm in-vitro with 25, 50 and 100 mg of crude extract per ml of phosphate buffered saline caused paralysis leading to death taking 4.02-4.20, 3.05-3.75 and 2.05-2.83 h respectively. Scanning electron microscopic observations on treated worms revealed deformation of surface architecture, particularly in scolex and surface microtriches. Severe distortion and disorganization of the tegumental and subtegumental layer along with cytoplasmic organelle was also observed under transmission electron microscope. The possible use of the plant as a potential anthelmintic against cestode parasite is discussed.     

Higher-order squeezing of the electromagnetic field in spontaneous and stimulated Raman processes

The occurrence of fourth and fifth-order squeezing in the fundamental mode of the electromagnetic field in spontaneous and stimulated Raman processes under the short-time approximation is investigated on the basis of a fully quantum-mechanical approach. In an idealized model, the Raman process is looked upon as a two-photon on a one phonon interaction process. The coupled Heisenberg equations of motion involving real and imaginary parts of the quadrature operators are established. The dependence of fourth- and fifth-order squeezing in terms of the signal-to-noise ratio on the number of photons is investigated. We have also established the amplitude squeezing effects in the Stokes and vibrational modes, which is found to be dependent on higher-order difference squeezing showing a difference squeezing that can be converted to normal squeezing.     

Energy and Network Balanced Distributed Clustering in Wireless Sensor Network

Wireless Personal Communications - Balancing energy consumption of sensor nodes to extend the network lifetime is a major concern for the energy constrained wireless sensor network. Improper load...     

A study of external mass transfer effect on biodegradation of phenol using low‐density polyethylene immobilized Bacillus flexus GS1 IIT (BHU) in a packed bed bioreactor

The impact of external mass transport on the biodegradation rate of phenol in a packed bed bioreactor (PBBR) was studied. A potential bacterial species, Bacillus flexus GS1 IIT (BHU), was isolated from the petroleum‐contaminated soil. Low‐density polyethylene (LDPE) immobilized with the B. flexus GS1 IIT (BHU) was used as packing material in the PBBR. The PBBR was operated by varying the inlet feed flow rate from 4 to 10 mL/min, and the corresponding degradation rate coefficients were found to be in the range of 0.119–0.157 L/g h. In addition, the highest removal rate of phenol was obtained to be 1.305 mg/g h at an inlet feed rate of 10 mL/min. The external mass transfer was studied using the model . A new empirical correlation for the biodegradation of phenol in the PBBR was developed after the evaluation at various values of K and n.     

Adaptive stabilization of input-saturated plants with known unstable poles

This paper considers the problem of controlling partially uncertain, possibly unstable and non-minimum phase linear plants submitted to a control saturation constraint. It seeks both plant l_∞-stabilization and output tracking. It proposes a direct adaptive controller and shows that if the closed loop poles are placed in a specific region, then the desired stability and tracking objectives are achieved.     

Performance Analysis of Gate-Stack Dual-Material DG MOSFET Using Work-Function Modulation Technique for Lower Technology Nodes

Silicon - Short channel effects (SCEs) along with mobility degradation has a great impact on CMOS technology below 100 nm. These effects can be overcome by using gate and channel...     

Optimization of Microwave-Vacuum Drying of Button Mushrooms Using Response-Surface Methodology

Button mushrooms (Agaricus bisporous) were dried in a microwave-vacuum dryer up to a final moisture content of around 6% (d.b.). The effect of microwave power level (115 to 285 W), system pressure (6.5 to 23.5 kPa), and slice thickness (6 to 14 mm) on drying efficiency and some quality attributes (color, texture, rehydration ratio, and sensory attributes) of dehydrated mushrooms were analyzed by means of response surface methodology. A rotatable central composite design was used to develop models for the responses.Analysis of variance showed that a second-order polynomial model predicted well the experimental data. The system pressure strongly affected color, hardness, rehydration ratio, and sensory attributes of dehydrated mushrooms. A lower pressure during drying resulted in better quality products. Optimum drying conditions of 202 W microwave power level, 6.5 kPa pressure, and 7.7 mm slice thickness were established for microwave vacuum drying of button mushrooms. Separate validation experiment was conducted at the derived optimum conditions to verify the predictions and adequacy of the models.