Managing a hybrid energy smart grid with a renewable energy source

The aim of this work is to develop tools for optimal power flow management control in a micro grid (MG). The latter consists of a wind turbine, energy storage system, two gas turbines (GTs), and the main grid. Unlike the traditional approach, which is limited to the distribution of active power, this paper models an electrical system to coordinate and optimize the flow of both active and reactive power using discrete controls. The proposed optimal power distribution strategy has two objectives. First, it aims at forecasting over a time horizon of 24 hours the optimal distribution of the active and reactive power required for each power source connected to the MG. The proposed management incorporates the forecasts of consumption, weather, and tariffs. Second, it aims at reducing the CO₂ emissions rate by optimizing both the operating point of the two GTs and the usage of the storage unit. The proposed optimization problem for the energy management system is solved using the Bellman algorithm through dynamic programming. Its effectiveness is illustrated with various simulations carried out in the Matlab environment. The supremacy of the proposed management algorithm is highlighted by comparing its performance with conventional (restricted) management.     

EETC: Energy Efficient Tree-Clustering in Delay Constrained Wireless Sensor Network

Wireless Personal Communications - Joint employment of multi-hop data forwarding and mobile data-collector is a popular technique for efficient data collection in energy constraint and delay...     

Immune response to chemically modified proteome

Both enzymatic and nonenzymatic PTMs of proteins involve chemical modifications. Some of these modifications are prerequisite for the normal functioning of cell, while other chemical modifications render the proteins as “neo-self” antigens, which are recognized as “non-self” leading to aberrant cellular and humoral immune responses. However, these modifications could be a secondary effect of autoimmune diseases, as in the case of type I diabetes, hyperglycemia leads to protein glycation. The enigma of chemical modifications and immune response is akin to the “chick-and-egg” paradox. Nevertheless, chemical modifications regulate immune response. In some of the well-known autoimmune diseases such as rheumatoid arthritis, systemic lupus erythematosus, and multiple sclerosis, chemically modified proteins act as autoantigens forming immune complexes. In some instances, chemical modifications are also involved in regulating immune response during pathogen infection. Further, the usefulness of proteomic analysis of immune complexes is briefly discussed.     

Ultralow loading Pt nanocatalysts prepared by atomic layer deposition on carbon aerogels

Using atomic layer deposition (ALD), we show that Pt nanoparticles can be deposited on the inner surfaces of carbon aerogels (CA). The resultant Pt-loaded materials exhibit high catalytic activity for the oxidation of CO even at loading levels as low as approximately 0.05 mg Pt/cm2. We observe a conversion efficiency of nearly 100% in the 150-250 degrees C temperatures range, and the total conversion rate seems to be limited only by the thermal stability of the CA support in ambient oxygen. The ALD approach described here is universal in nature, and can be applied to the design of new catalytic materials for a variety of applications, including fuel cells, hydrogen storage, pollution control, green chemistry, and liquid fuel production.     

MECOR: Minimal Energy Consumption with Optimized Routing in MANET

Energy and routing efficiency is a long-research topic from past decades in the area of MANET. The prior research contribution focusing on addressing both the issues are associated with issues like (1) few benchmarked studies, (2) adoption of conventional routing protocols based on shortest path to mitigate both issues, and (3) inefficient design principles of routing. Hence, this paper proposes a novel routing protocol in mobile ad hoc network (MANET) termed as MECOR i.e. minimal energy consumption with optimized routing. MECOR presents a simple communication strategy based on mathematical and signaling properties of mobile nodes in MANET to jointly address the energy and routing issues in MANET. The outcome of the MECOR was compared with conventional routing algorithm as well as recent studies of energy efficient routing policy to find that MECOR can minimize 58.82 % of energy in most challenging mobility scenarios of MANET.     

Fatigue Behavior of Thin Sheets of DP590 Dual-Phase Steel

Fatigue properties of 1.6?mm thick dual-phase steel (DP590) sheet have been determined by carrying out axial fatigue tests in load controlled mode at different stress ratios for both smooth specimens and specimens with hole at center. The presence of hole at center of the specimen significantly reduces the fatigue strength. When the fatigue data points are plotted in the Haig-Soderberg diagram, they follow a parabolic relationship for smooth specimens represented by Gerber line and a straight line relationship for the specimens with holes at its center represented by Goodman line. Master Diagram which acts as a guide for the fatigue design is also drawn for both smooth specimens and specimens with holes.     

Stable p-type conductivity and enhanced photoconductivity from nitrogen-doped annealed ZnO thin film

We report on the growth of p-type ZnO thin films with improved stability on various substrates and study the photoconductive property of the p-type ZnO films. The nitrogen doped ZnO (N:ZnO) thin films were grown on Si, quartz and alumina substrates by radio frequency magnetron sputtering followed by thermal annealing. Structural studies show that the N:ZnO films possess high crystallinity with c-axis orientation. The as-grown films possess higher lattice constants compared to the undoped films. Besides the high crystallinity, the Raman spectra show clear evidence of nitrogen incorporation in the doped ZnO lattice. A strong UV photoluminescence emission at ~ 380 nm is observed from all the N:ZnO thin films. Prior to post-deposition annealing, p-type conductivity was found to be unstable at room temperature. Post-growth annealing of N:ZnO film on Si substrate shows a relatively stable p-type ZnO with room temperature resistivity of 0.2 Ω cm, Hall mobility of 58 cm²/V s and hole concentration of 1.95 × 10¹⁷ cm^− 3. A homo-junction p-n diode fabricated on the annealed p-type ZnO layer showed rectification behavior in the current-voltage characteristics demonstrating the p-type conduction of the doped layer. Doped ZnO films (annealed) show more than two orders of magnitude enhancement in the photoconductivity as compared to that of the undoped film. The transient photoconductivity measurement with UV light illumination on the doped ZnO film shows a slow photoresponse with bi-exponential growth and bi-exponential decay behaviors. Mechanism of improved photoconductivity and slow photoresponse is discussed based on high mobility of carriers and photodesorption of oxygen molecules in the N:ZnO film, respectively.     

Microstructure characterization and charpy toughness of P91 weldment for as-welded,post-weld heat treatment and normalizing & tempering heat treatment

The effect of weld groove design and heat treatment on microstructure evolution and Charpy toughness of P91 pipe weldments was studied. The P91 pipe weldments were subjected to subcritical post weld heat treatment (760 °C-2 h) and normalizing/tempering conditions (normalized-1040 °C/40 min, air cooled; tempered 760 °C/2 h, air cooled) were employed. The influence of subsequent PWHT and N&T treatment on the microstructure of various zone of P91 pipe weldments were also investigated. The present investigation also described the effect of PWHT and N&T treatment on hardness, grain size, precipitate size, inter-particle spacing and fraction area of precipitates present in each zone of P91 pipe weldments. The result indicated great impact of heat treatment on the Charpy toughness and microstructure evolution of P91 weldments. The N&T treatment was found to be more effective heat treatment compared to subsequent PWHT. Charpy toughness value was found to be higher for narrow-groove design as compared to conventional V-groove design.