印度兰吉特大坝的泥沙管理

印度兰吉特河(Rangit)是提斯塔河(Teesta)的主要支流,位于东喜马拉雅地区。兰吉特水电站装机60 MW,于2000年2月投入运行。每年5~9月汛期之间,兰吉特河输沙量巨大,2006年,该电站发生水淹厂房事故。     

Effect of Temperature on Hydraulic Parameters of Cable-In-Conduit-Conductor of SST-1

Stable operation of superconducting magnets depend critically on the balance of heat deposition rate versus heat extraction rate by the cryo-coolant. Thus, the mass flow rate of the coolant in case of force-flow cooled superconducting magnet with Cable-In-Co-nduit-Conductor (CICC) construction becomes an important factor for optimum stability of magnets. The Toroidal and Poloidal Field magnets of Steady-state Superconducting Tokamak-1 (SST-1) is made of superconducting CICC with a void fraction of 40 %±2 %. For adequate cooling of magnets, supercritical helium at 4 bar and 4.5 K is forced-flown through the voids. Effect of temperature on mass flow rate and pressure drop in SST-1 CICC is studied in a 7 m long piece wound helically. The experimental friction factor of the CICC is also measured at different temperatures and flow rates and is compared with the standard Katheder equation and Tada equation. Also, based on the new findings obtained from the experimental results, the dimensionless Reynolds number has been slightly modified. This new number is used to propose a modified Katheder correlation for the friction factor in CICCs similar to that of SST-1.     

Dielectric relaxation in complex perovskite Ba(Bi1/2Ta1/2)O3

A new lead-free perovskite Ba(Bi_1/2Ta_1/2)O₃ was prepared by conventional ceramic fabrication technique at 1,200 °C/4 h in air atmosphere. The crystal symmetry, space group and unit cell dimensions were determined from the experimental results using FullProf software. The crystallite size and lattice strain were estimated from Williamson-Hall approach. XRD analysis of the compound indicated the formation of a single-phase cubic structure with the space group Pm3m. EDAX and SEM studies were carried out in order to evaluate the quality and purity of the compound. Permittivity data showed a low temperature coefficient of capacitance (T _CC  < 4%) up to +125 °C. Complex impedance analyses suggested the dielectric relaxation to be of non-Debye type. Electric modulus studies supported the hopping type of conduction in Ba(Bi_1/2Ta_1/2)O₃.     

SLDG: a metamodel for Simulink/Stateflow models and its applications

Simulink and Stateflow (SL/SF) models are being widely used to design and develop embedded systems. Often the SL/SF models of embedded controllers turn out to be large and consist of many subsystems and hierarchies. When such a system is maintained, it becomes difficult to manually analyse the model to identify the impacted elements due to the existence of several explicit and implicit dependencies among the model elements. To automate the analysis of an SL/SF model, we propose a metamodel to capture various types of dependencies existing across the basic blocks. We have named this metamodel Simulink dependency graph (SLDG). We investigate the use of SLDG in change impact visualization and regression test selection. We have developed a prototype tool by implementing our approach for the aforementioned applications.     

High-temperature flexural strength of I-CVI processed Cf/SiC composites with variable interphases

The effect of single-layer pyrocarbon (PyC) and multilayered (PyC/SiC)_n=4 interphases on the flexural strength of un-coated and SiC seal-coated stitched 2D carbon fiber reinforced silicon carbide (C_f/SiC) composites was investigated. The composites were prepared by I-CVI process. Flexural strength of the composites was measured at 1200 °C in air atmosphere. It was observed that irrespective of the type of interphase, the seal coated samples showed a higher value of flexural strength as compared to the uncoated samples. The flexural strength of 470 ± 12 MPa was observed for the seal coated C_f/SiC composite samples with multilayered interphase. The seal coated samples with single layer PyC interphase showed flexural strength of 370 ± 20 MPa. The fractured surfaces of tested samples were analyzed in detail to study the fracture phenomena. Based on microstructure-property relations, a mechanism has been proposed for the increase of flexural properties of C_f/SiC composites having multilayered interphase.     

Chimie douce hydrogen production from Hg contaminated water,with desirable throughput,and simultaneous Hg-removal

Hydrogen's widespread use is fraught with many difficulties. The challenges currently are to do with safety concerns in gas storage and transportation, and low rate of production leading to non-viability of technologies at the point-of-use. Another global concern of immediate relevance involves heavy-metal ion pollution. Viable processes which can simultaneously remove and result in beneficiation of the contaminants are hitherto rarely reported. In this context we report a single-step, in situ co-reduction approach which has the dual advantage of (i) Hg contaminant removal, and (ii) room temperature hydrogen production. Hydrogen is produced via galvanic corrosion of in situ synthesized nanoaluminium amalgam. The production rate (720 mL/min for 0.5 g-Al salt) is far superior to what would be expected from the use of pure hydrides, and/or using bulk amalgams at room temperature. The method is simple, chimie douce (i.e soft chemical), hence potentially affordable, and capable of providing a means of beneficiating Hg contaminated water present in effluents from certain industries (for example, industries which uses chlor-alkali process). The in situ co-reduction approach helps in bypassing the usual rate limiting step which involves formation of an alumina passivation layer on hydrolytic material surface. Given the potential that exists in scale down and up, this approach offers a method to address the long standing challenge of point-of-use hydrogen availability.     

The Effect of Nickel Electroplating on Corrosion Behavior of Metal Matrix Composites

Nickel electroplating was applied to A356.2 aluminum alloy and its composites for improving its corrosion resistance. The corrosion resistance of the A356.2 and composites reinforced with rice husk ash particulates was evaluated by potentio-dynamic polarization tests in aerated 3.5% NaCl solution. Composites were fabricated by using the liquid state processing technique. Scanning electron microscopy, energy dispersive spectroscopy, techniques were used for surface analysis of the coatings before the corrosion tests and optical microscope was used to study the surface morphology of the uncoated and coated specimens after polarization tests. Results demonstrated that the nickel coated specimens exhibited higher corrosion resistance than the uncoated specimens. However, it was noticed that there was no significant change in the corrosion resistance for the nickel plated composites.     

An adaptive plant leaf mobile informatics using RSSC

Multimedia Tools and Applications - An automated plant biometric system is now an important step in preserving nature’s biodiversity. This paper presents a novel Relative Sub-image Sparse...     

The effect of an amphiphilic self‐assembled lipid lamellar phase on the relief of dry skin

Humectant and occlusive technologies have traditionally been used for the treatment of dry skin. Originally, non‐lamellar‐forming ingredients were used such as petrolatum but recent research has shown the advantage of using lamellar‐forming ingredients such as ceramides, pseudoceramides and phospholipids in the relief of dry skin. Nevertheless, the importance of using lipid‐phase transition inducers, such as long‐chain fatty acids, has not been studied clinically. The evaluation of a novel complex of lipophilic ingredients was of interest: cetyl alcohol, isostearyl isostearate, potassium cetyl phosphate, cetyl behenate and behenic acid. The combination of all these ingredients was shown to be more effective than any single component in water vapour transmission rate studies. This was thought to be owing to the formation of a unique structural organization of the lipids upon dry‐down from an O/W emulsion as was examined by X‐ray diffraction and optical microscopy. When evaluated clinically in a randomized double‐blind and vehicle‐controlled moisturization efficacy trial, this novel blend of ingredients was shown to not only improve the visible signs of skin dryness to a significantly greater extent than a comparable mineral oil‐containing vehicle but also then maintain a better skin condition during the regression no‐treatment phase of the study. This combination of ingredients offers a new technology option for the treatment of dry skin.