Microwave Studies on Strontium Ferrite Based Absorbers

Single layer microwave absorbers based on strontium ferrite-epoxy composites have been fabricated and their reflection loss characteristics studied in the X-band (8–12.4 GHz) of microwave frequencies. Permittivity (_r – j_r) and permeability (_r – j_r) of Co and Ti added strontium ferrite SrCo _x Ti _x Fe_{12 – 2x} O₁₉ (x = 0.1 to 0.9 in steps of 0.2), have been measured. Thickness of the absorber is an important criterion influencing the absorption characteristics. Composites of 3 mm thickness are found to absorb over a reasonable range of X-band frequencies. A minimum reflection loss of –36.5 dB is observed for the composite with x = 0.3.     

Modeling of the refractive index and extinction coefficient of binary composite films

Southwell's analysis of optical multilayers within the limits of very thin films has been extended to include absorption in the multilayer for predicting the effective values of the refractive index n(e) and extinction coefficient k(e) of mixed-composition binary homogeneous films over a wide spectral region, including the high-absorption (k > 10(-2)) region. It has been found that n(e) in general is a complicated function of the optical parameters (n(1), k(1), n(2), k(2)) and volume fractions (f(1), f(2)) of the component materials in a homogeneous layer, and the expression for n(e) becomes the same as that predicted by the Drude model in the spectral region where the layers are transparent. Moreover, according to the present analysis, the volume fractions of the product of the refractive index and the extinction coefficient of the component materials of a binary composite film are additive and the sum equals the product of the effective refractive index and extinction coefficient of the composite film.     

Probabilistic neural-network-based protection of power transformer

An optimal probabilistic neural network (PNN) as a core classifier for fault detection and status indication of a power transformer has been presented. In this scheme, various operating conditions of a transformer are distinguished using signatures of the differential currents. The proposed differential protection scheme is implemented through two different structures of PNN, that is, one having one output and the other having five outputs. The developed algorithm is found to be stable against external fault, magnetising inrush, sympathetic inrush and over-excitation conditions for which relay operation is not required. For the test data of fault, it is found to operate successfully. The performance of proposed PNN and classical artificial neural network (ANN) has been compared. For evaluation of the developed algorithm, relaying signals for various operating conditions of a transformer are obtained by modelling the transformer in PSCAD/EMTDC. The algorithms are implemented using MATLAB. The results show the capability of PNN in terms of classification accuracy and speed in comparison to classical ANNs.     

Characterization and photoluminescence studies on hydrothermally synthesized Mn-doped barium titanate nano powders

Manganese doped cubic barium titanate nanocrystals with [Mn/Ti] mole percent varying from 0.1 to 3 were prepared through hydrothermal route at 150 °C. The mean crystallite diameters obtained for different Mn concentrations varied within 26 to 30 nm. TEM of a typical sample showed most of the particles as single crystallites (particle size 15-40 nm) with some weakly agglomerated particles. The photo luminescent (PL) spectra of each sample showed a sharp peak in the blue band centered approximately at 464 nm and a weaker peak in the green band centered nearly at 494 nm. The luminescent efficiency passed through maxima for the sample with 2% [Mn/Ti] molar ratio. Effect of calcination temperature in the range of 200 to 600 °C on PL spectra showed that the intensity of peak corresponding to blue region decreased with the increase in calcination temperature from 200 to 600 °C and for the sample calcined at 600 °C, only a broad peak corresponding to green luminescence region was observed.     

Coverage Modeling and Reliability Analysis Using Multi-state Function

Fault tree analysis is an effective method for predicting the reliability of a system.It gives a pictorial representation and logical framework for analyzing the reliability.Also,it has been used for a long time as an effective method for the quantitative and qualitative analysis of the failure modes of critical systems.In this paper,we propose a new general coverage model (GCM) based on hardware independent faults.Using this model,an effective software tool can be constructed to detect,locate and recover fault from the faulty system.This model can be applied to identify the key component that can cause the failure of the system using failure mode effect analysis (FMEA).     

A neuro-fuzzy approach for prediction of longitudinal wave velocity

Adaptive neuro-fuzzy inference system (ANFIS) is rapidly gaining popularity in the area of geophysics and geomechanics. This paper discusses the importance of ANFIS to prediction of p-wave velocity and its advantages over other conventional methods of computing. This paper deals with the application of a ANFIS to predict longitudinal wave velocity. P-wave measurement, which is also an indicator of peak particle velocity during blasting in a mine, is an important parameter to be determined to minimize the damage caused by ground vibrations. A number of previous researchers have tried to use different empirical methods to predict p-wave. But these empirical methods have their limitations due to its less versatile application. The fracture propagation is not only influenced by the physico-mechanical parameters of rock but also on the dynamic wave velocity of rock (e.g., compressional wave velocity). It has wide application in the different field of geophysics. An ANFIS model is designed to predict the compressional wave velocity of different rocks. The fracture roughness coefficient and physico-mechanical properties are taken as input parameters and compressional wave velocity as output parameters. The error for the predicted values is found to be negligible (0.5%) and generalization capability of the neuro-fuzzy model is found to be very useful for such type of geophysical problems.     

Reconnaissance mapping and management of salt-affected soils using satellite images

The Indo-Gangetic alluvial plain is subjected to large scale soil alkalization. In order to map and characterize salt-affected soils, with the aim of applying management techniques, Etah district in Uttar Pradesh, located between 26o^o45' to 28^o02' N and 78^o15' to 79^o20' E was selected. Multidate, high resolution, IRS-LISS II, geocoded FCC images on 1550 000 scale were used. Integrating visual image interpretation, physiographic analysis, ground data and laboratory analysis of soil samples, a legend for mapping salt-affected soils (SAS) was formulated. Based on variations in physicochemical properties: nature, intensity and depth wise distribution of salts, five categories of SAS requiring specific reclamation measures were identified. Soil categories S2, S3 and S4 have a gypsum requirement (GR) of 20, 12 and 4t/ha^-1 respectively. Reclamation of medium to heavy textured highly alkali soils requires the addition of amendments and a rice-wheat rotation for the initial 3-4 years. Under resource constraints, pit planting of Prosopis juliflora can bring about slow but effective reclamation. The soil category S5 is slightly alkali in the substratum, needing only biological reclamation by growing salt tolerant varieties of rice and wheat crops. Soils of category S1 are saline and need management by hydrological treatments. Incorporation of village boundaries on a map showing SAS would facilitate decision taking in planning reclamation projects and accelarate management operations directly at village level.     

Preparation and characterization of crosslinked chitosan microspheres for the colonic delivery of 5-fluorouracil

In this work, we attempted to develop a simple and inexpensive colon specific pulsatile drug-delivery system using chitosan microspheres loaded with 5-fluorouracil (5-FU) using an enteric-coated soft gelatin capsule. Chemical crosslinking by glutaraldehyde and interactions between the polymer and the drug were determined by Fourier transform infrared spectral study. Scanning electron microscopy of the microspheres revealed spherical shapes with smooth surfaces. Differential scanning calorimetry studies confirmed the molecular dispersion of the drug in the polymer matrix. Three different formulations (i.e., F1, F2, and F3) were prepared by the variation of the amount of 5-FU. Encapsulation efficiencies of 5.5, 10.8, and 17.9% for drug loadings of 10, 20, and 50%, respectively, were obtained. In vitro release studies were conducted at pH 1.2 and pH 7.4 (to simulate actual gastrointestinal fluid and gastrointestinal tract conditions, respectively). The results indicate that chitosan microspheres released 5-FU in both acidic (60%) and basic pH (40%) conditions, whereas the capsule (filled with chitosan microspheres) showed only 8–10% release in acidic media and nearly 90% in basic media within 12 h. The newly designed pulsatile capsule device could be used for targeting 5-FU to the colon. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Technologies for Ultradynamic Voltage Scaling

Energy efficiency of electronic circuits is a critical concern in a wide range of applications from mobile multimedia to biomedical monitoring. An added challenge is that many of these applications have dynamic workloads. To reduce the energy consumption under these variable computation requirements, the underlying circuits must function efficiently over a wide range of supply voltages. This paper presents voltage-scalable circuits such as logic cells, SRAMs, ADCs, and dc–dc converters. Using these circuits as building blocks, two different applications are highlighted. First, we describe an H.264/AVC video decoder that efficiently scales between QCIF and 1080p resolutions, using a supply voltage varying from 0.5 V to 0.85 V. Second, we describe a 0.3 V 16-bit microcontroller with on-chip SRAM, where the supply voltage is generated efficiently by an integrated dc–dc converter.      

Genotoxicity testing of extracts from aflatoxin-contaminated peanut meal, following chemical decontamination

One of the most important concerns in the decontamination of aflatoxin-containing feed commodities is the safety of the products for food-producing animals and for human consumption of products derived from these animals. A new method, based on the use of florisil and C18 solid phase extraction columns, was developed for the preparation of extracts from decontaminated peanut meal, which allowed testing with in vitro genotoxicity assays without interference of the residual aflatoxin B₁. Recovery of degradation products in the extracts was evaluated by the use of radiolabelled \[¹⁴C]-aflatoxin B₁ (AFB₁) added to naturallycontaminated peanut meal (3.5mg AFB₁/kg). The meal was treated by a small-scale version of an industrial decontamination process based on ammoniation. Following decontamination, more than 90% of the label could not be extracted from the meal. AFB₁ accounted for about 10% of the radiolabel present in the extractable fraction, indicating a total AFB reduction of more than 99%. Decontamination of the meal by a number of other small- and industrial-scale ammonia-based processes resulted in similar efficiencies. Application of the extraction procedure resulted in AFB₁-rich and AFB₁-poor fractions, the latter containing half of the extractable decontamination products but less than 1% of the residual AFB₁. Testing in the Salmonella /microsome mutagenicity assay (TA 100, with S9-mix) of the original crude extracts and AFB1 rich fractions prepared from non-treated and decontaminated meal, showed the positive results expected from the AFB₁ contents as determined by HPLC analysis. Analysis and testing of the AFB₁-poor fractions showed that the various decontamination processes not only resulted in a successful degradation of AFB₁ but also did not produce other potent mutagenic compounds. Slight positive results obtained with these extracts were similar for the untreated and treated meals and may be due to unknown compounds originally present in the meal. Results obtained with an unscheduled DNA synthesis (UDS) and Comet assay with rat hepatocytes supported this conclusion. Positive results obtained with the micronucleus assay, using immortalized mouse hepatocytes (GKB), did not clearly reflect the mycotoxin levels and require further examination. It is concluded that the newly developed extraction procedure yields highly reproducible fractions and hence is very suitable for examining the possible formation of less potent degradation products of aflatoxins in short-term genotoxicity tests.