Influence of Liquid Phase Additives on Structural and Sintering Behaviour of Samarium Modified Lead Titanate Ceramics

The combination of metal oxides Bi₂O₃:Li₂O in a ratio 89:11 gives a eutectic with a melting point of ～680°C. Such a low melting point oxide combination creates a working liquid phase at a highly favorable temperature for use as a densification aid. A liquid—phase sintering aid incorporating Bi₂O₃ and Li₂O is presented which demonstrates not only a reduction in the required sintering temperature but also shows relatively higher ‘c/a’ ratio (tetragonality) of PbTiO₃ ceramics with no fragility of the samples. Detailed dilatometric investigations have been performed in order to study the dominant shrinkage mechanism in the present system. Besides acting as a liquid phase fluxing agent, Bi₂O₃/Li₂O also behave as Curie shifter, which decreases Curie temperature in lead titanate system. The Curie temperature has also been verified from the thermal expansion behavior of sintered specimens. The value of dielectric constant increases after poling which may be due to the dominance of 180° domain wall over 90°.     

Designing communication strategies for heterogeneous parallel systems

This paper explores the suitability of the emerging passive star-coupled optical interconnection using wavelength division multiplexing as the system interconnect to provide high bandwidth (Gbits/sec) communication demanded by heterogeneous systems. Several different communication strategies (combinations of communication topologies and protocols) are investigated under a representative master-slave computational model. The interplay between system speed, network speed, task granularity, and degree of parallelism is studied using both analytical modeling and simulations. It is shown that a hierarchical ALOHA-based communication strategy between the master and the slaves, implemented on top of the passive star-coupled network, leads to a considerable reduction in channel contention and provides 50–80% reduction in task completion time for applications with medium to high degrees of coarse grain parallelism. Comparable reduction in channel contention is also shown to be achieved by using tunable acoustooptic filters at master nodes.     

Effect of solid polymer electrolyte on the sensitization of photocurrents in solid-state electrochemical cells using conducting polypyrrole

The effect of small concentration of methylene blue dye on photocurrents was studied in the solid-state photoelectrochemical cells fabricated using conducting polypyrrole-coated electrodes sandwiched with solid-polymer electrolyte, namely, polyvinylpyrrolidone with phosphoric acid. A maximum photosensitivity factor (S=I _l/I _d, where I _l is the photocurrent and I _d is the dark current) of the order of 5 is observed. The current–voltage (I–V) characteristics in such cells reveal that charge transport is mainly governed by the space charge effect. Comparison of the results presented in this paper with the ones we reported earlier [23] indicates that the matrix in which dye has been incorporated plays an important role in such sensitization processes. A matrix that can efficiently transport the photogenerated charge carriers is observed to be more suitable for such dye-sensitized devices.     

Abrasive wear behaviour of hardened high strength boron steel

Abstract

Abrasive wear in industrial applications such as mining, materials handling and agricultural machinery constitutes a large part of the total wear. Hardened high strength boron steels are known for their good wear resistance and mechanical properties, but available results in the open literature are scarce. This work aims at investigating how different quenching techniques affect the two-body abrasive wear resistance of hardened high strength boron steels. Furthermore, the wear as a function of depth in thicker hardened high strength boron steel plates has also been studied. The material characterisation has been carried out using microhardness, SEM/energy dispersive spectroscopy and three-dimensional optical surface profilometry. The results have shown that water quenched and tool quenched high strength boron steel had similar wear resistance. The main wear mechanisms appear to be microcutting combined with microfatigue. Workhardening during the abrasion process has been found to affect the abrasive wear.     

Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station

Failure investigation was carried out on boiler water wall tubes of a thermal power plant through visual inspection, chemical analysis, and metallurgical analysis. Failure was in the form of thin/micro cracks along the length of the tubes which were located at the girth welding joint of tubes. Experimental results revealed that the cracking was from inward to outward of the tube thickness. Discontinuities/cavities were observed in the welded region which might have occurred due to lack of fusion of base metal and the weld metal. Cracks were initiated from the sharp corner/crack tip of the cavities/discontinuities present at the welded region under the action of hoop/thermal stress existed during the operation. Nature of the crack propagation indicates the case of typical hydrogen-induced cracking. Moreover, the presence of the cavities/discontinuities reduced the cross-sectional area of tubes resulting increased stress intensity. Increased stress beyond the flow stress of the material assisted by hydrogen-induced effect resulted the cracking of the tubes. In order to mitigate the problem, proper welding of tubes joints should be carried out followed by proper inspection after weld. Secondly, hydrogen dissolution during welding should be prevented and treatment for its removal after welding should be carried out.     

Experimental realization of ‘universal homodyne tomography’ with a single local oscillator

We report preliminary experimental measurement of the twin-beam quantum state via optical homodyne tomography using a single local oscillator. The experiment is a realization of the recently reported ‘universal homodyne tomography’ technique. The results agree well with theoretical predictions and reveal the non-classical photon-number correlation between the signal and idler photons of the twin-beam state.     

Remote sensing and GIS for locating favourable zones of lead-zinc-copper mineralization in Rajpura-Dariba area,Rajasthan, India

This paper reports the results of a pilot study carried out in RajpuraDariba area, Rajasthan, for locating favourable zones of lead-zinc-copper (Pb-Zn-Cu) mineralization using remote sensing, Geographical Information System (GIS) and geostatistical modelling techniques. Remotely sensed data, both aerial and satellite, were used to update the existing geological map. ATLAS GIS software and multivariate geostatistical techniques were used to analyse and integrate different types of geological and geophysical datasets. The Favourability Index (FI) maps prepared during this study show the occurrence of three favourable zones for Pb-Zn-Cu mineralization. They are: (i) around and north of Rawan ka Khera; (ii) isolated spots between Ruppura and Bhupalsagar; and (iii) north of Dhani. Selective geochemical sampling and resistivity profiling carried out in these favourable zones indicated the presence of geochemical anomalies (anomalous concentrations of Zn and Cu) and low/moderate resistivity zones, respectively. Recent drilling carried out by the Department of Mines and Geology (DMG), Rajasthan, at about 2.5 km north of Rawan ka Khera (one of the predicted favourable zones) indicated evidence of Cu mineralization at a depth of about 70 m.