Poly(L‐lactide)/polypropylene blends: Evaluation of mechanical,thermal, and morphological characteristics

Poly(L lactide) (PLA) was blended with polypropylene (PP) at various ratios (PLA:PP = 90 : 10, 80 : 20, 70 : 30, and 50 : 50) with a melt‐blending technique in an attempt to improve the melt processability of PLA. Maleic anhydride (MAH)‐grafted PP and glycidyl methacrylate were used as the reactive compatibilizers to induce miscibility in the blend. The PLA/PP blend at a blend ratio of 90 : 10, exhibited optimum mechanical performance. Differential scanning calorimetry and thermogravimetric analysis studies showed that the PLA/PP/MAH‐g‐PP blend had the maximum thermal stability with the support of the heat deflection temperature values. Furthermore, dynamic mechanical analysis findings revealed an increase in the glass‐transition temperature and storage modulus with the addition of MAH‐g‐PP compatibilizer. The interaction between the compatibilizers and constituent polymers was confirmed from Fourier transform infrared spectra, and scanning electron microscopy of impact‐fractured samples showed that the soft PP phase was dispersed within the PLA matrix, and a decrease in the domain size of the dispersed phase was observed with the incorporation of MAH‐g‐PP, which acted as a compatibilizer to improve the compatibility between PLA and PP. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Temperature dependence of I-V characteristics and performance parameters of silicon solar cell

The temperature dependence of open-circuit voltage (V_oc) and curve factor (CF) of a silicon solar cell has been investigated in temperature range 295-320 K. The rate of decrease of V_oc with temperature (T) is controlled by the values of the band gap energy (E_g), shunt resistance (R_sh) and their rates of change with T. We have found that R_sh decreases nearly linearly with T and its affect on dV_oc/dT is significant for cells having smaller R_sh values. Series resistance also changes nearly linearly with voltage. CF depends not only on the value of R_s and other parameters but also on the rate of change of R_s with voltage. The rate of decrease of R_s with voltage and T are important to estimate the value of CF and its decrease with temperature accurately.     

Blocking the PCNA/NKp44 Checkpoint to Stimulate NK Cell Responses to Multiple Myeloma

Simple SummaryMembrane-associated PCNA is expressed on the surface of human MM cell lines and primary MM cells. Mab 14-25-9 interacts with membrane-associated PCNA and blocks its binding to NK-expressed NKp44, thus activating NK function. We showed that mAb 14-25-9 can serve as an immune checkpoint blocker, enhancing the function of NK cells on target human MM cell lines and primary cells.AbstractMultiple Myeloma (MM) is a devastating malignancy that evades immune destruction using multiple mechanisms. The NKp44 receptor interacts with PCNA (Proliferating Cell Nuclear Antigen) and may inhibit NK cells’ functions. Here we studied in vitro the expression and function of PCNA on MM cells. First, we show that PCNA is present on the cell membrane of five out of six MM cell lines, using novel anti-PCNA mAb developed to recognize membrane-associated PCNA. Next, we stained primary bone marrow (BM) mononuclear cells from MM patients and showed significant staining of membrane-associated PCNA in the fraction of CD38⁺CD138⁺ BM cells that contain the MM cells. Importantly, blocking of the membrane PCNA on MM cells enhanced the activity of NK cells, including IFN-γ-secretion and degranulation. Our results highlight the possible blocking of the NKp44-PCNA immune checkpoint by the mAb 14-25-9 antibody to enhance NK cell responses against MM, providing a novel treatment option.     

Metabolic Pathways for Observed Impacts of Crop Load on Floral Induction in Apple

The triggers of biennial bearing are thought to coincide with embryonic development in apple and occurs within the first 70 days after full bloom (DAFB). Strong evidence suggests hormonal signals are perceived by vegetative apple spur buds to induce flowering. The hormonal response is typically referred to as the floral induction (FI) phase in bud meristem development. To determine the metabolic pathways activated in FI, young trees of the biennial bearing cultivar ‘Nicoter’ and the less susceptible cultivar ‘Rosy Glow’ were forced into an alternate cropping cycle over five years and an inverse relationship of crop load and return bloom was established. Buds were collected over a four-week duration within 70 DAFB from trees that had maintained a four-year biennial bearing cycle. Metabolomics profiling was undertaken to determine the differentially expressed pathways and key signalling molecules associated with biennial bearing. Marked metabolic differences were observed in trees with high and low crop load treatments. Significant effects were detected in members of the phenylpropanoid pathway comprising hydroxycinnamates, salicylates, salicylic acid biosynthetic pathway intermediates and flavanols. This study identifies plant hormones associated with FI in apples using functional metabolomics analysis.     

A novel approach of synthesizing nano Y2O3 powders for the fabrication of submicron IR transparent ceramics

A facile methodology of synthesizing highly reactive, round-edged, Sulfur–free nano Y₂O₃ powders to fabricate submicron IR transparent yttria ceramics having a unique combination of superior optical and mechanical properties are reported for the first time. Dispersion of yttrium hydroxide into aqueous sol and addition of seed particles produced near-spherical yttria powders having non – aggregated particles with narrow size distribution. The powder exhibited excellent sinterability reaching near-theoretical density at temperatures around 1400 °C in air. Effective inter-particle coordination and traces of Al additives assisted achieving superior densification. Sintered specimens showed average grain sizes closer to 700 nm. Post-sinter hot isostatic pressing eliminated the residual porosity from the sintered samples leading to exhibit IR transmissions up to 84% in the 2.0–9.0 μm regions, equivalent to single crystal Y₂O₃. Achieving densification through solid-state sintering and retaining the sintered grain sizes in the submicron regions significantly enhanced the mechanical properties. Sintered and HIPed Y₂O₃ specimens were further characterized for their thermal properties at temperature regions between ambient to 950 °C.     

Structural rearrangement by Ni,Cr doping in zinc cobaltite and its influence on supercapacitance

Transitional metal oxides are prevalent in the energy storage devices due to their remarkable electrochemical activity and charge storage capability. In this study, a spinel structured zinc cobaltite (ZnCo₂O₄) is doped with Ni and Cr to form a novel (Ni,Cr:ZnCo₂O₄) electrode material towards supercapacitor (SC) applications. Dopants served as a conductivity booster, particle size reducer and active sites provider benefitting the electrochemical activity. Comparatively, the doped sample delivered a higher capacitance value of 575 Fg^-1 in the potential range of 0–0.6V with 1 M KOH solution as an electrolyte which is higher than that of the pristine material and better cyclic stability is improved from 82.2% to 90.24% for 2000 cycles. The specific capacitance value of 30 Fg^-1 and 73 Fg^-1 at 0.75 Ag^-1 is achieved for the fabricated asymmetric supercapacitor device with Ni,Cr:ZnCo₂O₄ using Cu foil and Ni foam as current collector respectively. The device assembled with doped sample using Ni foam current collector has an energy density of 16.3 WhKg^?1 and a power density of 0.9 KWKg^?1 superseding the performance of the devices constructed with the pristine ZnCo₂O_4. The performance of Ni and Cr doped spinel structured zinc cobaltite device indicates a notable progress towards the direction of better performance supercapacitor applications.     

A Survey of Localization Systems in Internet of Things

Mobile Networks and Applications - With the rapid development in wireless technologies and the Internet, the Internet of Things (IoT) is envisioned to be an integral part of our daily lives....     

Development of De-NOx selective catalytic reduction catalyst using V2O5 –TiO2 supported on a ceramic filter candle

This study reports the development of a V₂O₅-TiO₂-based selective catalytic reduction (SCR) catalyst supported on alumina-silicate water filter candles for NO_x abatement. The synthesised catalysts have been characterised by thermogravimetry/differential scanning calorimetry, X-ray diffraction, scanning electron microscope and measurement of NO_x removal performance. The catalyst synthesised under optimal conditions shows NO_x reduction efficiency of >97%. SCR performance has been augmented using O₂ as a carrier gas. This simple, reproducible procedure can have wide applications in NOx abatement.     

Exploration on sulfur/acid treatment of sepiolite composite positive electrode material for lithium-sulfur battery

High energy density battery system is endowed with more complex Lithium sulfur cathode whose electrochemical redox reaction and phase transition occurred due to multi electron participation. The different mole ratios of sepiolite mixed with sulfur were synthesized by acid cum thermal treatment method. The morphological analysis illustrates that the sepiolite powder is composed of micro fibrous bundles in the range of 1 μm to 10 μm. The sorption isotherms indicate that the sieved sepiolite (Sp) and different mole ratio (4, 6 and 8) of sepiolite/sulfur shows a type-IV isotherm of mesoporous material. The S/SvSp (sulfur/sieved sepiolite) composite cathode exhibits an initial discharge capacity of 1066 mAh g^?1 and attains a stable capacity of 596 mAh g^?1 during 40 cycles with 97% of efficiency. All the results correlated with the better electrochemical behaviour of electrode and it satisfies the needs of high energy density storage application.     

Fabrication of silicon nanohorns via soft lithography technique for photoelectrochemical application

Water splitting for H₂ production by absorbing sunlight is broadly used as a common technique to counter existing energy crisis and environmental problems, caused by extreme use of fossil fuels. We report a versatile and facile method to fabricate ordered Silicon nanohorns (SiNHs) by employing prefabricated metal nano-gap template on Si. The close-packed monolayer is used to develop the nanohole template, which enables the generation of SiNHs via metal-assisted controlled chemical etching. By varying monolayer parameters and etching sequences, SiNHs with desired dimensions were obtained. Growth along the crystalline plane of the base substrate ?100?, with a consistent bent at the tip of the SiNH, has been observed. The resulting SiNHs exhibited enhanced photoelectrochemical properties, with short-circuit photocurrent density more than four times higher than that of the planer Si along with enhanced trapping of photogenerated carriers. A photocurrent density of ~4.8 mA/cm² was observed at a potential of -1 V vs. RHE. Further, the electrochemical impedance study (EIS) was carried out to understand the photoelectrochemical activity and charge transfer kinetics of the SiNHs system. These nanostructures enhance light absorption and may be one of the low-cost alternatives for optical devices, sensors, and hydrogen evolution.