Estimation of the angle between ultrasound beam and blood velocitythrough correlation functions

Correlation functions, calculated on the ultrasonic echoes scattered by blood, provide a rich harvest of information concerning the local speed, which has often been underestimated; in particular, blood flow measurement usually yields only the longitudinal component of the velocity, even if significant information about the speed direction can be extracted. In this paper it is shown how correlation functions, calculated on the dependency of both time and space displacements, allow us to evaluate the angle Θ between ultrasound beam and blood flow; when straight vessels are considered, this single parameter, combined with the longitudinal velocity profile, permits the complete hemodynamic characterization. The underlying theory is developed and preliminary experimental results are presented     

Electrical passivation in hydrogen plasma exposed GaN

Lightly p-doped (3×10¹⁷ cm^-3) GaN grown on GaAs substrates by metal organic molecular beam epitaxy (MOMBE) shows deactivation of the residual acceptors on exposure to a microwave (2.45 GHz) hydrogen plasma at 250°C. Subsequent annealing to 350°C produces further dopant passivation, while higher temperatures (450°C) restore the initial conductivity. These results suggest that hydrogen carrier gases should be avoided during vapour phase growth of III-V nitrides     

Characterisation of aperture coupled microstrip patch antenna withthick ground plane

The feasibility of using a thick ground plane with an aperture coupled microstrip patch antenna while maintaining reasonable antenna performance is demonstrated using moment method and reciprocity analyses in the spectral domain. The thick ground plane, which may serve as a heatsink for active MMIC circuitry, or as a mechanical support for thin substrates, is particularly advantageous in millimetre wave phased array applications. It is found that the effect of ground plane thickness is to reduce the level of coupling from the feed line to the patch     

MODELING the VIBRATIONAL RESPONSE of PLANTAIN FRUITS

Plantain fruits of the plantain subgroup ( Musa AAB Group) were obtained at a green stage and used in this study. the fruits were labelled for identification, and stored in a chamber maintained at a temperature of 20C and relative humidity of 90 ± 4%. On daily basis, for a period of 14 days, the fruits were removed from the storage chamber and each was weighed to record the mass. They were vibrated vertically on a vibration exciter through a range of frequencies from 10 to 2000 Hz. the frequency response was modeled by a single-degree-of-freedom Kelvin model. the mass of the fruit, the stiffness, the natural frequency and the critical damping all decreased significantly (p < 0.01) with storage time. There was no significant change (p > 0.05) in the damping coefficient of the fruit. the damping ratio decreased significantly (p < 0.01) with storage time. the models that described the changes in these parameters with storage time were obtained by stepwise regression, and are also presented. It was concluded that a single degree-of-freedom model provides satisfactory results of the vibrational characteristics of intact plantain fruit.     

DECOMPOSITION OF TURMERIC CURCUMINOIDS AS AFFECTED BY LIGHT,SOLVENT AND OXYGEN1

Turmeric curcuminoids are important natural pigments but their instability limits their use in many foods. This study was conducted to examine light-induced degradation of turmeric curcumin as affected by solvent system and oxygen. The rate constants and half-lives were determined for purified curcumin, demethoxycurcumin and bis-demethoxycurcumin exposed to 1450 lux using reversed-phase HPLC. Rates of degradation of each pigment followed first-order kinetics. Differences in rate constants and half-lives between the individual pigments were minor in an acetic acid-NaCl solution; however, in methanol, large differences in stability to light of the individual pigment were observed. Stability of all the pigments to light was several fold greater in methanol than in acid brine. In methanol sparged with air, stability to photooxidation was curcumin > demethoxycurcumin > bis-demethoxycurcumin. In methanol, curcumin was more stable than the other curcuminoids when sparged with air than when sparged with nitrogen. In methanol sparged with nitrogen, demethoxycurcumin was the most stable pigment. All of the pigments were stable in the dark.     

Apparent diffusion coefficient determination of sodium hydroxide through potato skin and flesh under different temperatures and concentration conditions

The aims of the present study were to analyze the most important chemical reactions between sodium hydroxide and potato constituents involved in potato chemical peeling, and to measure the apparent diffusivity of NaOH in potato skin and flesh separately, as a function of temperature and NaOH concentration, selected according to potato chemical peeling process. Chemical reaction of the suberin of the potato skin with NaOH was proposed as the most important one to promote chemical peeling. Whereas starch hydrolysis, middle lamella dissolution and cell wall disruptions were proposed as the principal chemical reactions in flesh. Experiments to determine NaOH apparent dijfusivities in skin and flesh were performed following a cell diffusion method at 25, 40, 50, 60 and 70 °C temperatures and concentrations of 4, 12 and 20 g NaOH/100 g of solution. Finally, correlation equations were determined to describe apparent diffusivity dependence on temperature and concentration.     

Transistor equivalent circuits

This paper surveys the history of the electric-circuit representation of the transistor over the past fifty years. During the first two decades after the transistor was announced in 1948, primary emphasis was on small-signal equivalent circuits, which could be used for linear-circuit analysis and design. In addition, parameters of many of these equivalent circuits for the bipolar junction transistor, which are described, were related to the physical construction of the device. Approximately two-thirds of the paper is devoted to this period, when the writer personally contributed to this effort. By the beginning of the third decade, transistor circuits had became more complex, and circuit analysis was carried out with the help of digital computers. Interest then shifted away from small-signal equivalent circuits to “models” for computer-aided circuit design (CACD). This transition, including the models used in the widely used CACD program SPICE, is described. MOS transistors are treated only briefly; by the time MOS transistors became commercially viable devices, emphasis then also had shifted to “models” for CACD. In conclusion, the writer notes that there is still hope for us aficionados of small-signal equivalent circuits; new types of transistors are still being characterized in this manner