Optimal detection of visual evoked potentials

The authors consider the problem of detecting visual evoked potentials (VEP's). A matched subspace filter is applied to the detection of the VEP and is demonstrated to perform better than a number of other evoked potential detectors. Unlike single-harmonic detectors, the matched subspace filter (MSF) detector is suitable for detecting multiharmonic VEP's. Moreover, the MSF is optimal in the uniformly most powerful sense for multiharmonic signals with unknown noise variance     

Performance of interface engineeredSiNx/ICL/InP/In0.53Ga0.47As/InP dopedchannel HIGFET's

SiN_x/InP/InGaAs doped channel passivated heterojunction insulated gate field effect transistors (HIGFETs) have been fabricated for the first time using an improved In-S interface control layer (ICL). The insulated gate HIGFETs exhibit very low gate leakage (10 nA@V_GS =±5 V) and I_DS (sat) of 250 mA/mm. The doped channel improves the DC characteristics and the HIGFETs show transconductance of 140-150 mS/mm (L_g=2 μm), f_t of 5-6 GHz (L_g=3 μm), and power gain of 14.2 dB at 3 GHz. The ICL HIGFET technology is promising for high frequency applications     

Parallel reduced area multipliers

As developed by Wallace and Dadda, a method for high-speed, parallel multiplication is to generate a matrix of partial products and then reduce the partial products to two numbers whose sum is equal to the final product. The resulting two numbers are then summed using a fast carry-propagate adder. This paper presents Reduced Area multipliers, which employ a modified reduction scheme that results in fewer components and less interconnect overhead than either Wallace or Dadda multipliers. This reduction scheme is especially useful for pipelined multipliers, because it minimizes the number of latches required in the reduction of the partial products. The reduction scheme can be applied to either unsigned (sign-magnitude) or two's complement numbers. Equations are given for determining the number of components and a method is presented for estimating the interconnect overhead for Wallace, Dadda, and Reduced Area multipliers. Area estimates indicate that for non-pipelined multipliers, the reduction in area achieved with Reduced Area multipliers ranges from 3.7 to 6.6 percent relative to Dadda multipliers, and from 3.8 to 8.4 percent relative to Wallace multipliers. For fully pipelined multipliers, the reduction in area ranges from 15.1 to 33.6 percent relative to Dadda multipliers, and from 2.9 to 9.0 percent relative to Wallace multipliers.     

Threshold voltage-minimum gate length trade-off in buried channelPMOS devices for scaled supply voltage CMOS technologies

The trade-off between threshold voltage (V_th) and the minimum gate length (L_min) is discussed for optimizing the performance of buried channel PMOS transistors for low voltage/low power high-speed digital CMOS circuits. In a low supply voltage CMOS technology it is desirable to scale V_th and L_min for improved circuit performance. However, these two parameters cannot be scaled independently due to the channel punch-through effect. Statistical process/device modeling, split lot experiments, circuit simulations, and measurements are performed to optimize the PMOS transistor current drive and CMOS circuit speed. We show that trading PMOS transistor V_th for a smaller L_min results in faster circuits for low supply voltage (3.3 to 1.8 V) n⁺-polysilicon gate CMOS technology, Circuit simulation and measurements are performed in this study. Approximate empirical expressions are given for the optimum buried channel PMOS transistor V _th for minimizing CMOS circuit speed for cases involving: (1) constant capacitive load and (2) load capacitance proportional to MOS gate capacitance. The results of the numerical exercise are applied to the centering of device parameters of a 0.5 μm 3.3 V CMOS technology that (a) matches the speed of our 0.5 μm 5 V CMOS technology, and (b) achieves good performance down to 1.8 V power supply. For this process the optimum PMOS transistor V_th (absolute value) is approximately 0.85-0.90 V     

Occlusion of large atrial septal defects with a centering buttoned device: early clinical experience

A feasibility clinical study was conducted for the transcatheter occlusion of large ostium secundum atrial septal defects with the centering buttoned device. The centering buttoned device is a modification of the regular buttoned device in which a centering counter-occluder is sutured at the central 40% portion of the occluder. During centering it is stretched, forming a parachute-shaped structure and pulling the occluder over the center of the defect. During buttoning, the counter-occluder forms a double figure eight, opposing the right atrial side of the atrial septum. Occlusion was performed in 12 patients aged 6 to 56 years. All had been rejected for transcatheter occlusion by the regular buttoned device, because of either their defect size or the lack of adequate septal rim. The defect size varied between 23 and 31 mm, and the device size varied between 45 and 60 mm. Nine had immediate effective occlusions of their defects and three residual shunts. One patient with unbuttoning had hemolysis at 2 weeks and underwent surgery. Early results of the transcatheter occlusion of large atrial septal defects are promising, and larger clinical trials are justified.     

Chronic abdominal pain: role of video-laparoscopic adhesiolysis

Adhesions have been suggested as a possible cause of chronic abdominal pain, but the reports of their etiological role conflict. Lysis of adhesions has been proposed as the therapeutic modality of choice, although the reports of success are controversial. The aim our prospective study was to determine whether laparoscopic adhesiolysis ameliorates chronic abdominal pain in patients with abdominal adhesions. Forty-one patients with chronic abdominal pain lasting for more than 6 months, but with no abnormal findings other than adhesions found at laparoscopy, underwent laparoscopic adhesiolysis. 37 patients (90.2%) were available for follow-up after a median time interval of 18 months (range: 12-41 months). Twenty-two patients (59.4%) were free from abdominal pain and 9 (24.3%) patients reported significant amelioration of their pain. Six (16.2%) patients had no amelioration. In conclusion the laparoscopy is an effective tool for the evaluation of patients with chronic abdominal pain, and laparoscopic adhesiolysis cures of ameliorates chronic abdominal pain in more than 80% of patients.